Z-Lite 549PHM-BK

Z-Lite 549PHM-BK Outdoor Post Light Instruction Manual

Model: 549PHM-BK

Indledning

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Z-Lite 549PHM-BK Outdoor Post Light. Please read this manual thoroughly before installation and retain it for future reference.

Sikkerhedsoplysninger

ADVARSEL: Risiko for elektrisk stød. Afbryd strømmen ved afbryderen før installation eller service.

  • Sluk altid for hovedstrømforsyningen ved afbryderen, før du påbegynder installation eller udfører vedligeholdelse.
  • All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unsure about the installation process.
  • This fixture is designed for outdoor use. Ensure all connections are properly sealed to prevent water intrusion.
  • Brug kun den specificerede pæretype og wattage: Incandescent, E26 base, 100 Watts maximum.
  • Må ikke installeres i nærheden af ​​brandfarlige materialer.
  • Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

Pakkens indhold

Kontroller, at alle komponenter er til stede, før installationen påbegyndes:

  • Outdoor Post Light Fixture (1)
  • Monteringsudstyr (skruer, trådmøtrikker)
  • Instruktionsmanual (dette dokument)
Z-Lite 549PHM-BK Outdoor Post Light with Matte Opal Shade

Image 1: Z-Lite 549PHM-BK Outdoor Post Light. This image displays the complete post light fixture with its black finish and matte opal glass shade.

Opsætning og installation

Professional installation is recommended. Ensure power is OFF at the circuit breaker before proceeding.

  1. Forbered installationsområdet: Ensure the existing post or mounting surface is stable and capable of securely supporting the fixture's weight.
  2. Ledningsføring:
    • Tilslut armaturets sorte ledning til husets sorte (varme) ledning.
    • Tilslut armaturets hvide ledning til husets hvide (neutrale) ledning.
    • Connect the fixture's ground wire to the house's ground wire.
    • Secure all connections with approved wire nuts and electrical tape.
  3. Montering af armaturet: Align the fixture base with the mounting holes on the post or junction box. Secure the fixture using the provided mounting screws. Do not overtighten.
  4. Installer pære: Insert one E26 base incandescent bulb, up to 100 watts (not included), into the socket.
  5. Fastgør skærm: Carefully place the matte opal glass shade onto the fixture and secure it according to the design (e.g., with retaining ring or screws).
  6. Gendan strøm: Når installationen er færdig, og alle forbindelser er sikre, skal strømmen genoprettes ved afbryderen.

Betjeningsvejledning

This outdoor post light is designed for simple operation.

  • Tænd/sluk: The light is controlled by the external switch connected to its power source (e.g., a wall switch, timer, or photocell).
  • App kontrol: The product specifications indicate 'Control Method: App'. If an app is used, refer to the specific app's instructions for pairing and control.

Opretholdelse

  • Rensning: To clean the fixture, turn off the power, allow it to cool, and wipe with a soft, damp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
  • Udskiftning af pære: Turn off power at the circuit breaker. Allow the bulb to cool completely. Unscrew the old bulb and replace it with a new E26 base incandescent bulb, maximum 100 watts.
  • Inspektion: Kontrollér jævnligt ledninger og forbindelser for tegn på slid eller skader.

Fejlfinding

ProblemMulig årsagLøsning
Lyset tændes ikke.Ingen strøm til armaturet.
Defekt pære.
Løs ledningsforbindelse.
Tjek afbryderen.
Udskift pære.
Kontroller ledningsforbindelserne (sørg for, at strømmen er slukket).
Lyse flimrer.Løs pære.
Løs ledningsforbindelse.
Forkert pæretype.
Spænd pæren.
Kontroller ledningsforbindelserne (sørg for, at strømmen er slukket).
Sørg for korrekt pæretype og hvadtage.
Armaturet bliver for varmt.Pære hvadtage for højt.Replace with a bulb of 100 watts or less.

Specifikationer

  • Mærke: Z-Lite
  • Modelnavn: 549PHM-BK
  • Produktdimensioner: 6.63 cm L x 6.63 cm B x 15.75 cm H
  • Materiale: Legeret stål (armatur), glas (skærm)
  • Udfør type: Sort
  • Skygge farve: Matte Opal
  • Lysarmaturform: Stolpelys
  • Indendørs/udendørs brug: Udendørs
  • Strømkilde: Elektrisk med ledning
  • Voltage: 120 volt
  • Lyskildetype: Glødelampe
  • Pære base: E26
  • Maksimal kompatibel wattage: 100 watt
  • Antal lyskilder: 1
  • Kontrolmetode: App
  • Installationstype: Overflademontering
  • Varens vægt: 6 pund
  • Vandmodstandsniveau: Vandtæt
  • Specifikation opfyldt: ETL-, UL-godkendt
  • Montering påkrævet: Ja

Garantioplysninger

This Z-Lite product comes with a manufacturer's warranty. For specific details regarding warranty coverage, duration, and claims process, please refer to the documentation included with your purchase or contact Z-Lite customer support directly.

Kundesupport

For technical assistance, replacement parts, or any questions not covered in this manual, please contact Z-Lite customer support.

Note: Specific contact information is not provided in the product data. Please refer to the manufacturer's official webwebstedet eller produktemballagen for aktuelle kontaktoplysninger.

© 2024 Z-Lite. All rights reserved.