Fender '68 Custom Twin Reverb Ampinstruktionsbog til lifner

1. Introduktion og overview

The Fender '68 Custom Twin Reverb Amplifier pays tribute to the classic look, sound, and performance of Fender's late '60s "silver face" amplifiers. Originally a transitional year for Fender amps, 1968 brought a fresh aesthetic with a silver and turquoise front panel and aluminum "drip edge" grille cloth trim, while maintaining the pure Fender tone. This amplifier is renowned for its clear, deep, and powerful sound, delivering big tube tone with world-class Fender reverb and vibrato effects.

The '68 Custom Twin Reverb features both channels with reverb and tremolo. The "custom" channel incorporates a modified Bassman tone stack, offering modern players enhanced tonal flexibility, especially when using pedals. It also provides quicker gain onset and reduced negative feedback for greater touch sensitivity. Equipped with dual 12-inch Celestion G12V-70 speakers, this amplifier delivers a distinctively rock 'n' roll flavor.

2. Nøglefunktioner

• Dual Channel Reverb and Tremolo: Both channels are equipped with reverb and tremolo effects, offering a vintage feel with modern versatility.
• Modified Bassman Tone Stack: The "custom" channel features a Bassman tone stack, providing enhanced tonal flexibility for use with various pedals.
• Celestion G12V-70 Speakers: Dual 12-inch Celestion G12V-70 speakers deliver a distinctively rock 'n' roll sound.
• Forbedret responsivitet: Quicker gain onset and reduced negative feedback contribute to greater touch sensitivity.
• Inkluderet tilbehør: Comes with a fitted amplifier cover and a 2-button footswitch for convenient control of effects.

3. Opsætning

3.1 Udpakning og placering

Fjern forsigtigt ampFjerneren fra emballagen. Placer ampPlacer apparatet på en stabil, plan overflade. Sørg for tilstrækkelig ventilation omkring enheden for at forhindre overophedning. Undgå at placere amplifier near heat sources or in direct sunlight.

3.2 Strømtilslutning

1. Sørg for amplifier's power switch is in the "OFF" position.
2. Connect the supplied power cord to the AC inlet on the rear panel of the amplivligere.
3. Sæt den anden ende af netledningen i en jordet stikkontakt.

3.3 Instrumenttilslutning

Connect your guitar or other instrument to one of the input jacks on the front panel using a high-quality instrument cable. The amplifier features two input jacks per channel (Custom and Vintage), typically labeled "1" (high gain) and "2" (low gain). Experiment to find the input that best suits your instrument's output level and desired tone.

3.4 Footswitch Connection

Connect the included 2-button footswitch to the "FOOTSWITCH" jack on the rear panel to enable remote control of the reverb and tremolo effects.

4. Betjeningsvejledning

4.1 Tænd/sluk

1. For at tænde:
   • Sørg for, at alle lydstyrkekontroller er indstillet til nul.
   • Flip the "POWER" switch to the "ON" position.
   • Vent cirka 30-60 sekunder, mens rørene varmes op.
   • Flip the "STANDBY" switch to the "ON" position.
   • Slowly raise the volume to your desired level.
2. For at slukke:
   • Lower all volume controls to zero.
   • Flip the "STANDBY" switch to the "OFF" position.
   • Wait a few seconds, then flip the "POWER" switch to the "OFF" position.

4.2 Betjeningselementer på frontpanelet

The '68 Custom Twin Reverb features two distinct channels: a 'Custom' channel with a modified Bassman tone stack and a 'Vintage' channel for classic Fender tones. Both channels include Reverb and Tremolo.

• Inputs (1 & 2): Input 1 offers higher gain, while Input 2 provides lower gain.
• Bind: Controls the overall output level of the selected channel.
• Diskant: Justerer diskantresponsen.
• Middle (Custom Channel Only): Justerer frekvensresponsen i mellemområdet.
• Bas: Justerer lavfrekvensresponsen.
• rumklang: Controls the intensity of the digital hall reverb effect.
• Speed (Tremolo): Justerer hastigheden af ​​tremolo-effekten.
• Intensity (Tremolo): Justerer dybden af ​​tremolo-effekten.

4.3 Tone Shaping Tips

• For a classic clean Fender tone, start with Volume around 3-5, Treble and Bass at 5-7, and Reverb at 2-4.
• To achieve a natural tube overdrive, increase the Volume control. The amp will begin to break up as it gets louder.
• The 'Custom' channel's Bassman tone stack allows for more aggressive mid-range shaping, ideal for driving pedals.
• Experiment with the Speed and Intensity controls of the Tremolo to find your preferred modulation.

4.4 Produktdemonstrationsvideoer

5. Vedligeholdelse

5.1 Generel pleje og rengøring

• Behold amprengøres ved at tørre den af ​​med en blød, tør klud.
• Undgå at bruge slibende rengøringsmidler eller opløsningsmidler, da disse kan beskadige overfladen.
• Beskyt amplifier from dust, moisture, and extreme temperatures.
• When transporting, use the included fitted amplifier cover to protect against scratches and impacts.

5.2 Udskiftning af rør

Vacuum tubes have a finite lifespan and will eventually need replacement. If you notice a decrease in performance, unusual noise, or a change in tone, it may be time to replace the tubes. It is recommended to have tube replacement and biasing performed by a qualified technician to ensure proper operation and safety.

5.3 Udskiftning af sikringer

Hvis amplifier fails to power on, check the main fuse located on the rear panel. Always replace a blown fuse with one of the exact same type and rating to prevent damage to the amplifier and ensure safety. Consult the specifications section for the correct fuse type.

6. Fejlfinding

• Ingen lyd:
  • Check all cable connections (power, instrument, speaker).
  • Sørg for amplifier is powered on and the standby switch is engaged.
  • Verify instrument volume and tone controls are not set to zero.
  • Check if the fuse has blown (refer to Maintenance section).
• Overdreven støj/brummen:
  • Sørg for, at alle kabler er korrekt afskærmede og i god stand.
  • Prøv at tilslutte amplifier into a different power outlet or a power conditioner.
  • Flyt ampFjern fjernbetjeningen fra andre elektroniske enheder, der kan forårsage interferens.
  • Faulty tubes can cause noise; consider professional inspection.
• Svag eller forvrænget lyd:
  • Check instrument cable for damage.
  • Verify speaker connection.
  • Tubes may be worn out or faulty; professional inspection is recommended.

7. Specifikationer

Front view of the Fender '68 Custom Twin Reverb Ampløfter, showcasing its silver and turquoise front panel, aluminum "drip edge" grille cloth trim, and control knobs.

Side view of the Fender '68 Custom Twin Reverb Amplifier, illustrating its physical dimensions: 10.38 inches depth, 19.88 inches height, and 26.16 inches width.

8. Garanti og support

For warranty information, product registration, and technical support, please visit the official Fender website or contact Fender customer service. Keep your proof of purchase for any warranty claims.

Fender Officiel Webwebsted: www.fender.com