1. Introduktion og overview
This manual provides instructions for the FAAC TM 433-2 remote control, designed for operating gate systems. This device transmits at a frequency of 433.92 MHz and features two control buttons. It is supplied with the necessary battery and programming instructions to ensure a simple setup process.
Billede 1.1: Forside view of the FAAC TM 433-2 Remote Control. The remote is black with two distinct buttons.
2. Opsætning
2.1 Batteriinstallation
The FAAC TM 433-2 remote control uses one 12V (23A) alkaline battery. The battery is included with the remote control.
- Åbn forsigtigt fjernbetjeningen casing. Refer to the specific instructions provided with your remote for the exact method of opening, as this may vary.
- Find batterirummet.
- Insert the 12V (23A) battery, ensuring the correct polarity (+ and -) is observed.
- Luk fjernbetjeningen casing sikkert.
2.2 Programmering af fjernbetjeningen
This remote control utilizes a switch-based programming method. Detailed programming instructions are included with your product. The process is designed to be straightforward and does not require specialized equipment.
Generally, programming involves matching the internal switches of the new remote to those of an existing, working remote or the receiver unit. Please consult the specific programming guide provided with your FAAC TM 433-2 for precise steps.
3. Betjeningsvejledning
The FAAC TM 433-2 remote control features two buttons for operating your gate system. The maximum operational range is approximately 40 meters, though this can be affected by environmental factors and obstacles.
- To Open/Close the Gate: Press one of the two buttons on the remote control. The specific function of each button (e.g., open, close, stop, pedestrian access) depends on how your gate system and remote were programmed.
- Rækkevidde: For optimal performance, operate the remote within 40 meters of the receiver and ensure a clear line of sight if possible.
4. Vedligeholdelse
4.1 Udskiftning af batteri
When the remote control's range decreases significantly or it stops responding, the battery may need replacement. Follow the battery installation steps (Section 2.1) to replace the 12V (23A) battery.
4.2 Rengøring
Brug en blød, tør klud til at rengøre fjernbetjeningen. Undgå at bruge slibende rengøringsmidler, opløsningsmidler eller for meget fugt, da disse kan beskadige enheden.
5. Fejlfinding
If your FAAC TM 433-2 remote control is not functioning as expected, consider the following:
- Fjernbetjeningen svarer ikke: Kontrollér batteriet. Udskift det om nødvendigt (se afsnit 4.1).
- Reduceret rækkevidde: This often indicates a low battery. Replace the battery. Ensure there are no new obstructions between the remote and the gate receiver.
- Gate not responding to button press: Verify that the remote is correctly programmed to your gate system. If unsure, refer to the programming instructions (Section 2.2) or consult your gate system's manual.
- Interferens: Other radio frequency devices nearby may cause temporary interference. Try operating the remote from a different position.
6. Specifikationer
| Feature | Specifikation |
|---|---|
| Modelnummer | TM433DS-2 |
| Mærke | FAAC |
| Frekvens | 433.92 MHz |
| Antal knapper | 2 |
| Batteritype | 1 x 12V (23A) Alkaline |
| Dimensioner (L x B x H) | 5 mm x 7 mm x 2 mm |
| Maksimal rækkevidde | 40 meter |
| Forbindelsesteknologi | Radiofrekvens |
| Farve | Sort |
| Speciel funktion | Ergonomisk |
7. Garanti og support
7.1 Garantioplysninger
The FAAC TM 433-2 remote control comes with a 1-year warranty. Availability of spare parts is also guaranteed for 1 year.
7.2 Kundesupport
For further assistance, technical support, or warranty claims, please contact your FAAC product retailer or the official FAAC customer service channels. Ensure you have your product model number (TM433DS-2) and proof of purchase available when seeking support.
