HMF Digital Combination Safe Box 4612512 Instruction Manual

1. Introduktion

Thank you for choosing the HMF Digital Combination Safe Box. This manual provides essential information for the safe and efficient operation of your new safe. Please read these instructions carefully before installation and use, and retain them for future reference.

Sikkerhedsoplysninger

• Do not store the emergency keys inside the safe. Keep them in a secure, accessible location away from the safe.
• Sørg for, at pengeskabet er sikkert monteret for at forhindre uautoriseret fjernelse.
• Udskift batterierne med det samme, når indikatoren for lavt batteri vises, for at undgå at blive låst ude.
• Keep your personal codes confidential and do not write them down near the safe.

2. Pakkens indhold

Kontroller venligst pakken for at sikre, at alle varer er til stede:

• 1 x HMF Digital Combination Safe Box
• 2 x nødnøgler
• 4 x fastgørelsesskruer
• 4 x vægankre
• 2 x aftagelige hylder
• 1 x Brugsanvisning (dette dokument)

3. Opsætning

3.1 First Opening (Using Emergency Key)

To open the safe for the first time, or if you forget your code or the batteries are depleted, use the emergency key:

1. Locate the emergency key cover on the electronic keypad.
2. Gently remove the cover to reveal the emergency keyhole.
3. Insert one of the provided emergency keys into the keyhole and turn it counter-clockwise.
4. Mens du holder nøglen drejet, skal du dreje knappen med uret for at åbne pengeskabslågen.
5. Remove the key and store it in a safe place, away from the safe.

3.2 Batteriinstallation

The safe requires 4 AA batteries (not included) for the electronic lock to function.

1. Open the safe door using the emergency key (if not already open).
2. Find batterirummet på indersiden af ​​​​døren til pengeskabet.
3. Skub batterirummets dæksel op.
4. Isæt 4 nye AA alkaline-batterier, og sørg for korrekt polaritet (+/-).
5. Close the battery compartment cover. You should hear a short beep indicating successful installation.

3.3 Montering af pengeskabet

For enhanced security, it is recommended to mount the safe to a wall or floor.

1. Choose a suitable location for mounting, ensuring it is a solid surface.
2. Marker borepunkterne gennem de forborede huller på bagsiden eller bunden af ​​pengeskabet.
3. Drill holes at the marked positions using an appropriate drill bit for your wall/floor material.
4. Indsæt de medfølgende vægankre i de borede huller.
5. Position the safe and secure it using the fixing screws. Tighten firmly.

4. Betjeningsvejledning

4.1 Indstilling af brugerkoden

The user code can be 3 to 8 digits long.

1. With the safe door open, press the red reset button located on the inside of the door, near the hinge. You will hear a beep and the yellow light on the keypad will illuminate.
2. Enter your desired new user code (3-8 digits) on the keypad.
3. Press the '#' button to confirm. The safe will beep twice, and the yellow light will turn off, indicating the code has been set.

4.2 Opening with User Code

1. Enter your user code (3-8 digits) on the keypad.
2. Press the '#' button. The green light will illuminate, and you will hear a beep.
3. Drej knappen med uret inden for 5 sekunder for at åbne pengeskabslågen.

4.3 Indstilling af masterkoden

The master code can also be 3 to 8 digits long and provides an alternative access method.

1. With the safe door open, press '00' on the keypad.
2. Press the red reset button located on the inside of the door. You will hear a beep and the yellow light will illuminate.
3. Enter your desired new master code (3-8 digits) on the keypad.
4. Press the '#' button to confirm. The safe will beep twice, and the yellow light will turn off.

4.4 Opening with Master Code

1. Enter your master code (3-8 digits) on the keypad.
2. Press the '#' button. The green light will illuminate, and you will hear a beep.
3. Drej knappen med uret inden for 5 sekunder for at åbne pengeskabslågen.

4.5 Lydløs tilstand

To operate the safe without sound:

1. To activate silent mode: Press '00' then '*' on the keypad.
2. To deactivate silent mode (restore sound): Press '66' then '*' on the keypad.

4.6 External Power Supply (for Dead Batteries)

If the batteries are completely depleted and you cannot open the safe with your code:

1. Locate the external power contacts on the keypad (usually two small metal points).
2. Press a 9V battery firmly against these contacts.
3. While holding the 9V battery in place, enter your user or master code and press '#'.
4. Drej knappen med uret for at åbne pengeskabet.
5. Udskift de interne AA-batterier med det samme, når de er åbnet.

4.7 Alarmfunktion

If an incorrect code is entered three consecutive times, the safe will sound an alarm for 20 seconds. If three more incorrect entries are made, the alarm will sound for 5 minutes.

4.8 Fabriksindstilling

To reset the safe to its factory default code (usually 159 or 1234, refer to specific model documentation if different):

1. Åbn pengeskabsdøren.
2. Press and hold the red reset button on the inside of the door for approximately 5 seconds until you hear a long beep.
3. The safe is now reset to its factory default code. You will need to set a new user code.

5. Vedligeholdelse

• Rensning: Tør pengeskabets yderside af med en blød, tør kludamp klud. Undgå slibende rengøringsmidler eller opløsningsmidler.
• Udskiftning af batteri: Replace batteries annually or when the low battery indicator lights up to ensure optimal performance.
• Låsemekanisme: Do not lubricate the lock mechanism. If it becomes stiff, contact customer support.

6. Fejlfinding

7. Specifikationer

• Model: 4612512
• Mærke: HMF
• Materiale: Alloy Steel (1.5mm body, 4mm door)
• Farve: Antracit
• Låsesystem: Electronic (3-8 digit PIN), Double Bolt, Emergency Key
• Udvendige mål (H x B x D): 50 x 35 x 31 cm
• Indvendige mål (H x B x D): 49.6 x 34.6 x 27 cm
• Vægt: 14.3 kg
• Magt: 4 x AA batterier (medfølger ikke)
• Montering: Pre-drilled holes for wall/floor mounting

8. Garanti og support

For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official HMF webwebsted. Gem din købsbevis til garantikrav.

For additional information or to explore other HMF products, visit the HMF Brand Store.