Indledning
This manual provides essential instructions for the safe and efficient operation, installation, and maintenance of your Friedrich PDE09K3SG 42-inch Packaged Terminal Air Conditioner. Please read this manual thoroughly before using the unit and retain it for future reference.

Figure 1: Friedrich PDE09K3SG Packaged Terminal Air Conditioner. This image displays the front view of the unit, highlighting its compact design and air intake/output grilles.
Vigtige sikkerhedsoplysninger
Følg altid grundlæggende sikkerhedsforanstaltninger ved brug af elektriske apparater for at reducere risikoen for brand, elektrisk stød og personskade.
- Læs alle instruktioner, før du bruger dette apparat.
- Brug ikke noget apparat med en beskadiget ledning eller stik.
- Bloker ikke luftåbninger.
- Sørg for korrekt jording.
- Overlad al service til kvalificeret servicepersonale.
Opsætning og installation
The Friedrich PDE09K3SG is designed for through-the-wall installation. Proper installation is crucial for optimal performance and safety. It is recommended that installation be performed by a qualified technician.
Udpakning
- Tag forsigtigt enheden ud af emballagen.
- Inspect the unit for any shipping damage. Report any damage immediately to your dealer.
- Sørg for, at alle komponenter, der er anført på pakkelisten, er til stede.
Beliggenhedskrav
- Install the unit in a wall sleeve designed for PTAC units.
- Ensure adequate clearance around the unit for proper airflow.
- The unit requires a dedicated 230/208 Volt electrical circuit.
Elektrisk tilslutning
This unit operates on 230/208 Volts. Consult a qualified electrician for proper wiring and connection to ensure compliance with local electrical codes.
Betjeningsvejledning
The Friedrich PDE09K3SG unit is typically controlled by a wall-mounted thermostat for precise temperature management.
Termostatstyring
The wall thermostat allows you to select operating modes and adjust temperature settings.
- Systemtilstand: Use the system switch to select between "Cool", "Heat", "Off", or "Em. Heat" (Emergency Heat) modes.
- Ventilatortilstand: Use the fan switch to select "Auto" (fan runs only when heating/cooling) or "On" (fan runs continuously).
- Temperaturjustering: Use the Up and Down arrow buttons to set your desired room temperature. The digital display will show the current and set temperatures.

Figure 2: Close-up of the Friedrich PTAC unit's internal control panel, indicating it is controlled by a wall thermostat. This panel is typically hidden behind a cover.
Luftstrømsstyring
The unit features a large vent for efficient air distribution. Ensure that the vent is not obstructed by furniture, curtains, or other objects to maintain optimal performance.
Opretholdelse
Regular maintenance ensures the longevity and efficiency of your PTAC unit.
Rengøring af luftfilter
The unit is equipped with an antimicrobial air filter. A clean filter is essential for efficient operation and good indoor air quality.
- Turn off the unit at the wall thermostat or circuit breaker before cleaning.
- Locate and remove the air filter (typically behind the front grille).
- Clean the filter with warm, soapy water. Rinse thoroughly and allow it to air dry completely before reinstallation.
- Reinstall the dry filter and restore power to the unit.
- Frekvens: Clean the filter monthly, or more often if the unit is used frequently or in dusty environments.
Spole rengøring
The DiamonBlue Corrosion Protection helps protect the coils, but periodic cleaning by a qualified technician is recommended to remove dirt and debris that can accumulate over time.
Fejlfinding
Inden du tilkalder service, vedrview følgende almindelige problemer og løsninger:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Enheden tænder ikke. | No power; thermostat set to "Off". | Check circuit breaker; ensure thermostat is set to "Cool" or "Heat". |
| Utilstrækkelig køling/opvarmning. | Dirty air filter; obstructed airflow; incorrect thermostat setting. | Clean air filter; remove obstructions from vents; adjust thermostat. |
| Usædvanlig støj. | Loose parts; debris in fan. | Turn off unit and inspect for loose components or debris. If noise persists, contact service. |
Hvis fejlfindingstrinene ikke løser problemet, skal du kontakte kvalificeret servicepersonale.
Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | PDE09K3SG (Item Model Number: 292279) |
| Mærke | Friedrich |
| Kølekapacitet | 9,400 BTU (0.78 tons) |
| Varme Type | Elektrisk varme |
| Voltage | 230/208 volt |
| Mål (D x B x H) | 21.5 cm x 42 cm x 16 cm |
| Varens vægt | 127 pund |
| Kølemiddel | R410A |
| Særlige funktioner | Heating and Cooling Function, DiamonBlue Corrosion Protection, Antimicrobial Air Filter |
| Sæsonbestemt energieffektivitetsforhold (SEER) | 13 |
| Farve | Hvid |
Garanti og support
For warranty information and technical support, please refer to the documentation included with your purchase or visit the official Friedrich webwebsted. Gem din købskvittering for garantikrav.
Fabrikant: Friedrich
Inkluderede komponenter: Monteringsvejledning





