Arregui W25EB Electronic Built-in Safe User Manual

1. Produktet er slutview

The Arregui W25EB is an electronic built-in safe designed for secure storage of valuables. It features a robust steel construction, an electronic keypad for access, and an emergency key for backup. Its compact design allows for discreet wall installation, providing enhanced security for your home or office.

Figure 1: Arregui W25EB electronic safe with the door open, showing the interior and the electronic keypad.

Nøglefunktioner

• Electronic lock with a programmable code (4 to 8 digits).
• Emergency key for manual override in case of forgotten code or battery depletion.
• Two 18 mm diameter locking bolts for enhanced security.
• Constructed from alloy steel for durability.
• Designed for wall-mounted installation.
• Compact dimensions: 25 cm (Depth) x 38 cm (Width) x 28 cm (Height).
• Indicative volume of 17 liters.

2. Sikkerhedsoplysninger

• Læs alle instruktioner omhyggeligt før installation og brug.
• Keep the emergency keys in a secure location, separate from the safe and away from unauthorized access.
• Opbevar ikke nødnøglerne inde i pengeskabet.
• Ensure the safe is securely mounted to a solid structure to prevent unauthorized removal.
• Udskift batterierne med det samme, når indikatoren for lavt batteri vises, for at undgå låsning.
• Hold pengeskabet væk fra overdreven fugtighed eller ekstreme temperaturer.
• Do not attempt to force the safe open if the code fails; use the emergency key.

3. Pakkens indhold

Bekræft, at alle følgende komponenter er inkluderet i din pakke:

• Arregui W25EB Electronic Built-in Safe
• Emergency Keys (2 units)
• Monteringsudstyr (skruer og vægankre)
• Brugervejledning (dette dokument)

Figure 2: Included components: emergency keys, mounting screws, and wall anchors.

4. Opsætning

4.1 Batteriinstallation

The safe requires 4 AA alkaline batteries (included). The battery compartment is typically located on the inside of the safe door or behind the keypad cover.

1. Open the safe door using the emergency key if it's the first time or if batteries are depleted.
2. Find batterirummet.
3. Isæt 4 nye AA alkaline-batterier, og sørg for korrekt polaritet (+/-).
4. Luk batterirummets dæksel.

Figure 3: Electronic keypad where battery compartment is typically located.

4.2 Indledende kodeopsætning

Upon first use or after battery replacement, you will need to set your personal opening code.

1. With the safe door open, press the internal reset button (usually a small red or green button located on the inside of the door near the hinge).
2. The indicator light on the keypad will illuminate.
3. Enter your desired 4 to 8 digit code on the keypad.
4. Press the 'A' or '#' button to confirm the code.
5. The indicator light will flash, confirming the new code is set.
6. Test den nye kode med døren åben, før du lukker den.

4.3 Montering af pengeskabet

The Arregui W25EB safe is designed for wall-mounted installation. It is crucial to mount it to a solid, secure structure.

1. Choose a suitable location in a wall that can support the weight of the safe and its contents.
2. Marker borepunkterne på væggen ved hjælp af pengeskabets forborede huller som skabelon.
3. Drill holes into the wall using an appropriate drill bit for your wall material.
4. Indsæt vægankrene i de borede huller.
5. Position the safe and align its mounting holes with the anchors.
6. Secure the safe to the wall using the provided mounting screws. Ensure all screws are tightened firmly.

Figure 4: Diagram showing safe features and potential mounting points.

5. Betjeningsvejledning

5.1 Åbning af pengeskabet med din kode

1. Indtast din personlige kode på 4 til 8 cifre på tastaturet.
2. Press the 'A' or '#' button to confirm.
3. If the code is correct, the green indicator light will illuminate, and you will hear a beep.
4. Drej knappen med uret inden for 5 sekunder for at åbne pengeskabslågen.

5.2 Ændring af brugerkoden

You can change your personal code at any time.

1. Open the safe door using your current code.
2. Locate and press the internal reset button.
3. Indikatorlampen vil lyse.
4. Enter your new 4 to 8 digit code.
5. Press the 'A' or '#' button to confirm.
6. The indicator light will flash, confirming the new code is set.
7. Test den nye kode med døren åben, før du lukker den.

5.3 Using the Emergency Key

The emergency key provides manual access to the safe in situations such as forgotten code or depleted batteries.

1. Find nødnøglehullet, som normalt er skjult bag et lille dæksel på tastaturpanelet.
2. Fjern dækslet.
3. Insert the emergency key into the keyhole and turn it clockwise.
4. While holding the key turned, turn the knob on the keypad clockwise to open the safe door.
5. Once open, remove the emergency key.

Figure 5: Emergency key inserted into the lock for manual opening.

6. Vedligeholdelse

6.1 Udskiftning af batteri

When the batteries are low, the indicator light may flash or the keypad may not respond. Replace all 4 AA batteries promptly to ensure continuous operation.

1. Åbn pengeskabsdøren.
2. Få adgang til batterirummet.
3. Fjern de gamle batterier og bortskaf dem på en ansvarlig måde.
4. Insert new AA alkaline batteries, observing correct polarity.
5. Luk batterirummet.

6.2 Rengøring

Rengør ydersiden af ​​pengeskabet med en blød, damp klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler, da de kan beskadige overfladen eller de elektroniske komponenter.

7. Fejlfinding

8. Specifikationer

9. Garanti og support

For information regarding warranty coverage, technical support, or spare parts availability, please refer to the manufacturer's official webwebstedet eller kontakt deres kundeservice direkte. Gem din købskvittering som købsbevis i tilfælde af garantikrav.