ARREGUI Class Electronic Lock Safe (Model T25EB) Instruction Manual

Indledning

Thank you for choosing the ARREGUI Class Electronic Lock Safe. This manual provides essential information for the proper installation, operation, and maintenance of your safe. Please read these instructions carefully before use and retain them for future reference.

The ARREGUI Class safe is designed to provide secure storage for your valuables, featuring an electronic lock system and an emergency key override. Its robust alloy steel construction and compact design make it suitable for various home or office environments.

Sikkerhedsoplysninger

• Always keep the emergency keys in a secure location, separate from the safe, and not inside the safe itself.
• Sørg for, at pengeskabet er sikkert monteret på en væg eller et gulv for at forhindre uautoriseret fjernelse.
• Udsæt ikke pengeskabet for ekstreme temperaturer eller fugtighed.
• Udskift batterierne med det samme, når indikatoren for lavt batteri vises, for at sikre kontinuerlig drift.
• This safe is designed for security against theft and is not water-resistant.

Pakkens indhold

Kontroller, at alle komponenter er til stede, før du fortsætter installationen:

• ARREGUI Class Electronic Lock Safe
• Emergency Keys (2 units)
• Mounting Hardware (bolts and anchors)
• AA alkaliske batterier (4 stk.)
• Instruktionsmanual

Opsætning

1. Batteriinstallation

The safe requires 4 AA alkaline batteries for the electronic lock to function. The battery compartment is typically located on the inside of the safe door.

1. Open the safe using the emergency key (refer to "Using the Emergency Key" if needed).
2. Find batteridækslet på indersiden af ​​døren.
3. Remove the cover and insert the 4 AA batteries, ensuring correct polarity (+/-).
4. Sæt batterirummets dæksel på igen.
5. Test the electronic lock by entering the default code (usually 0000 or 1234, check the label inside the safe or manual for specifics) and turning the knob.

2. Indstilling af indledende kode

It is crucial to set your personal code immediately after battery installation.

1. With the safe door open, press the red or green reset button located on the inside of the door, near the hinge or battery compartment. A beep will sound, and the yellow indicator light will illuminate.
2. Indtast din ønskede 4- til 8-cifrede kode på tastaturet inden for 5 sekunder.
3. Confirm the code by pressing the "A" or "#" button (depending on model, refer to keypad markings). A confirmation beep will sound.
4. Vigtig: Test the new code with the door open first. Enter your new code, press "A" or "#", and turn the knob. The bolts should retract.

3. Monteringsvejledning

For enhanced security, it is highly recommended to mount the safe to a solid surface.

Billede: Forside view of the ARREGUI Class Electronic Lock Safe in its closed state, showing the keypad and manual override lock.

• The safe features pre-drilled mounting holes in both the base and the back panel.
• Choose a suitable location, such as inside a closet or cabinet, where the safe can be securely fastened to a wall stud or concrete floor.
• Placer pengeskabet, og marker borepunkterne gennem de forborede huller.
• Drill pilot holes using an appropriate drill bit for your wall or floor material.
• Insert the provided anchors (if applicable) into the drilled holes.
• Align the safe with the holes and secure it using the provided mounting bolts. Tighten firmly.

Betjening af pengeskabet

1. Opening with Electronic Code

1. Indtast din personlige kode på 4 til 8 cifre på tastaturet.
2. Press the "A" or "#" button. The green indicator light will illuminate, and you will hear a beep.
3. Drej knappen med uret inden for 5 sekunder for at åbne pengeskabslågen.

2. Lukning af pengeskabet

Close the door and turn the knob counter-clockwise until the bolts are fully extended and the door is securely locked.

3. Ændring af brugerkoden

Du kan til enhver tid ændre din personlige kode, mens døren er åben.

1. Åbn pengeskabsdøren.
2. Press the red or green reset button on the inside of the door. The yellow indicator light will illuminate.
3. Enter your new 4 to 8 digit code.
4. Press the "A" or "#" button to confirm.
5. Test the new code with the door open before closing the safe.

4. Using the Emergency Key

The emergency key provides access in case of forgotten code or depleted batteries.

Image: The ARREGUI Class Electronic Lock Safe with its door open, revealing the interior and the emergency keys inserted into the manual override lock.

1. Locate the keyhole cover on the electronic keypad panel.
2. Fjern forsigtigt dækslet.
3. Insert the emergency key into the keyhole and turn it clockwise.
4. While holding the key turned, turn the main knob clockwise to open the safe.
5. Once open, you can replace the batteries or reset the code. Remember to remove the emergency key and replace the keyhole cover after use.

5. Indikator for lavt batteri

When the batteries are low, the red indicator light on the keypad will illuminate or flash after entering your code, or the safe may emit a series of warning beeps. Replace all 4 AA batteries immediately to ensure proper function.

Opretholdelse

• Udskiftning af batteri: Replace all 4 AA alkaline batteries annually, or immediately when the low battery indicator activates. Using high-quality alkaline batteries is recommended.
• Rensning: Tør ydersiden af ​​pengeskabet af med en blød, tør klud.amp klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler, da disse kan beskadige overfladen eller de elektroniske komponenter.
• Låsemekanisme: The electronic lock and bolt mechanism are designed for maintenance-free operation. Do not attempt to lubricate or disassemble these components.

Fejlfinding

Specifikationer

Garanti og support

ARREGUI products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or service, please refer to the warranty card included with your purchase or visit the official ARREGUI webwebsted. Gem din købskvittering som købsbevis i tilfælde af garantikrav.

For assistance, please contact ARREGUI customer service through their official channels. Do not attempt to repair the safe yourself, as this may void the warranty and compromise its security features.