Gator Frameworks GFW-GTR-1000

Gator Frameworks GFW-GTR-1000 Single Guitar Stand Instruction Manual

Model: GFW-GTR-1000

Indledning

Thank you for choosing the Gator Frameworks GFW-GTR-1000 Single Guitar Stand. This stand is designed to securely hold one acoustic or electric guitar, providing a stable and protective storage solution. Constructed from heavy-duty steel with rubberized padding, it ensures your instrument's finish remains protected. This manual provides essential information for setup, operation, maintenance, and troubleshooting to ensure optimal use of your guitar stand.

Sikkerhedsoplysninger

  • Ensure all components are securely fastened before placing a guitar on the stand.
  • Placer stativet på en flad, stabil overflade for at forhindre det i at vælte.
  • Do not exceed the stand's weight capacity.
  • Keep the stand away from high-traffic areas where it might be accidentally bumped.
  • The red safety trim on the feet enhances visibility; ensure it is intact.

Opsætningsinstruktioner

The GFW-GTR-1000 guitar stand is designed for quick and easy assembly.

  1. Fold basen ud: Gently spread the three legs of the stand until they are fully extended and stable.
  2. Insert the Body Cradle: The lower body cradle piece slots into the central base. Ensure it is fully inserted and oriented correctly to support the guitar's body.
  3. Juster højden: Loosen the height adjustment knob on the main shaft. Extend the upper shaft to the desired height for your instrument. Tighten the knob securely to lock the height in place.
  4. Position Neck Yoke: The upper neck yoke is pre-attached. Ensure the rubberized padding is facing upwards to cradle the guitar neck.
  5. Secure Neck Restraint: The flexible neck restraint loop should be positioned to easily secure the guitar neck once placed on the stand.
Gator Frameworks GFW-GTR-1000 Single Guitar Stand assembled with an acoustic guitar

Image: Fully assembled Gator Frameworks GFW-GTR-1000 Single Guitar Stand with an acoustic guitar.

Close-up of the height adjustment mechanism on the Gator Frameworks GFW-GTR-1000 guitar stand

Image: Detail of the height adjustment knob and shaft.

Betjeningsvejledning

Using your GFW-GTR-1000 stand is straightforward:

  1. Placing the Guitar: Gently lift your guitar and rest its body on the padded lower cradle. Ensure the guitar is centered and stable.
  2. Fastgørelse af halsen: Place the guitar's neck into the padded upper yoke. Use the flexible neck restraint loop to secure the neck, preventing the guitar from accidentally falling forward.
  3. Fjernelse af guitaren: Unlatch the neck restraint, lift the guitar from the neck yoke, and then lift it off the lower body cradle.
Close-up of a hand securing a guitar neck with the flexible restraint on the Gator Frameworks GFW-GTR-1000 stand

Image: Demonstrating the secure neck restraint feature.

Close-up of the rubberized padded lower cradle of the Gator Frameworks GFW-GTR-1000 guitar stand

Image: Detail of the protective rubberized padding on the lower cradle.

Video: Officielt produkt slutview demonstrating the Gator Frameworks GFW-GTR-1000 Guitar Stand in use.

Opretholdelse

  • Regularly inspect the stand for any loose parts or damage. Tighten any loose knobs or screws.
  • Clean the stand with a soft, dry cloth. Avoid abrasive cleaners that could damage the finish or rubber padding.
  • Check the rubberized padding and feet for wear and tear. Replace if necessary to maintain protection and stability.

Fejlfinding

ProblemMulig årsagLøsning
Stativet er ustabilt/vaklende.Legs not fully extended or on an uneven surface.Ensure legs are fully spread and the stand is on a flat, level surface. Check for loose connections.
Guitar slips from the stand.Neck restraint not engaged or worn padding.Always use the neck restraint. Inspect padding for wear and replace if needed.
Height adjustment slips.Justeringsknappen er ikke strammet tilstrækkeligt.Ensure the height adjustment knob is firmly tightened after setting the desired height.

Specifikationer

  • Model: GFW-GTR-1000
  • Mærke: Gator Frameworks
  • Kompatibilitet: Single Electric or Acoustic Guitar
  • Materiale: Heavy-Duty Steel, Synthetic (Padding)
  • Farve: Black with Red Safety Trim
  • Varens vægt: 0.91 kilo (2.0 lbs)
  • Emnemål (L x B x H): 21.85 x 8.1 x 5.2 cm (foldet/pakket)
  • Justerbar højde: 19.6-23 tommer (500-585 mm)
Diagram showing the dimensions of the Gator Frameworks GFW-GTR-1000 guitar stand

Image: Detailed dimensions of the GFW-GTR-1000 stand.

Garantioplysninger

The Gator Frameworks GFW-GTR-1000 Single Guitar Stand comes with a 3 års garanti from the manufacturer, Gator Cases. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the official Gator Cases webwebsted eller kontakt kundesupport.

Support og kontakt

For further assistance, product inquiries, or support, please visit the official Gator Frameworks store or contact Gator Cases customer service.

© 2026 Gator Frameworks. All rights reserved.