Puig 6320H Multi-Adjustable Clip-On Visor Instruction Manual

1. Introduktion

This manual provides instructions for the proper installation, operation, and maintenance of your Puig 6320H Light Smoke Multi-Adjustable Clip-On Visor. This visor is designed to enhance wind protection and reduce turbulence and noise on your motorcycle windshield.

Nøglefunktioner omfatter:

• Multi-adjustable design for personalized wind deflection.
• Easy clip-on mounting, requiring no drilling into your existing windshield.
• Designed for quick installation and removal.

Image 1.1: The Puig 6320H Light Smoke Multi-Adjustable Clip-On Visor.

2. Sikkerhedsoplysninger

Please read all safety information before installation and use. Failure to follow these instructions may result in product damage, injury, or property damage.

• Sikker installation: Ensure the visor is securely attached to the windshield according to the installation instructions. A loose visor can detach during operation, posing a hazard.
• Sigtbarhed: Always ensure the visor does not obstruct your field of vision. Adjust its position to maintain clear visibility.
• Materiale kompatibilitet: This product is made of acrylic. Avoid using harsh chemicals or abrasive materials for cleaning, as this can damage the visor.
• Forslag 65 Advarsel: Dette produkt kan indeholde kemikalier, der af staten Californien er kendt for at forårsage kræft og fosterskader eller andre reproduktionsskader. For mere information, besøg www.P65Warnings.ca.gov.

3. Pakkens indhold

Kontroller, at alle komponenter er til stede, før installationen påbegyndes:

• 1 x Puig 6320H Multi-Adjustable Clip-On Visor
• Mounting hardware (clips, screws, washers)

If any parts are missing or damaged, please contact Puig customer support immediately.

4. Opsætning og installation

The Puig 6320H visor features a clip-on installation method, eliminating the need for drilling into your motorcycle's windshield.

1. Forbered forruden: Ensure your motorcycle's windshield is clean and free of debris where the visor will be attached.
2. Assemble Mounting Clips: Attach the provided mounting clips to the visor. Ensure all screws and washers are used as per the diagram. Do not overtighten.
3. Position the Visor: Carefully place the assembled visor onto the top edge of your motorcycle's windshield. The clips should securely grip the windshield.
4. Fastgør visiret: Tighten the clips to firmly hold the visor in place. Ensure the visor is centered and stable. Verify that there is no movement or looseness.
5. Endelig kontrol: Gently attempt to move the visor by hand to confirm it is securely mounted and will not detach during riding.

Image 4.1: Diagram illustrating the clip-on installation process. Note: Drilling is not required.

Image 4.2: The Puig 6320H visor shown installed on a motorcycle windshield.

5. Betjening og justering

The Puig 6320H visor is multi-adjustable, allowing you to fine-tune its position for optimal wind protection and reduced noise.

• Justering af vinkel: The visor features adjustable hinges on each side. Loosen the adjustment points slightly to change the angle of the visor relative to your main windshield.
• Justering af højde: The clips allow for minor vertical adjustment along the top edge of your windshield.
• Testing Adjustments: After making adjustments, ensure all fasteners are tightened. Test the new position at low speeds in a safe environment to confirm desired wind deflection and stability before riding at higher speeds.

Note: When adjusting, manipulate both sides of the visor simultaneously and carefully to avoid stressing the hinges. Avoid forcing adjustments.

6. Vedligeholdelse

Proper care will extend the life and maintain the clarity of your Puig visor.

• Rensning: Clean the visor with a soft cloth and mild soap and water. Avoid using abrasive cleaners, solvents, or ammonia-based products, as these can damage the acrylic material.
• Inspektion: Periodically inspect the visor and its mounting hardware for any signs of wear, damage, or looseness. Tighten any loose fasteners.
• Opbevaring: When not in use for extended periods, store the visor in a clean, dry place away from direct sunlight and extreme temperatures.

7. Fejlfinding

Dette afsnit omhandler almindelige problemer, du kan støde på.

• Visor feels loose or detaches:
  • Ensure all mounting screws and clips are securely tightened.
  • Verify that the clips are correctly gripping the windshield without obstruction.
  • Inspect the windshield for any damage that might prevent a secure attachment.
• Increased noise or turbulence after installation:
  • Adjust the angle and height of the visor. Small changes can significantly impact airflow.
  • Experiment with different positions to find the optimal setting for your riding posture and motorcycle.
• Missing parts upon delivery:
  • Refer to the "Package Contents" section. If parts are missing, contact Puig customer support immediately for assistance.

8. Specifikationer

Kompatible modeller

This visor is designed for universal fitment on various motorcycle windshields. Specific compatible models include, but are not limited to:

Billede 8.1: Eks.ample of compatible Yamaha Tenere models.

9. Garanti

The Puig 6320H Multi-Adjustable Clip-On Visor is covered by a manufacturer's warranty. For specific details regarding warranty coverage, duration, and claims, please refer to the documentation included with your purchase or contact Puig directly.

10. Support

For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact Puig customer support.

• Online: Visit the official Puig webwebsted for supportressourcer og kontaktoplysninger.
• E-mail/Telefon: Refer to your product packaging or the Puig webwebstedet for aktuelle kontaktoplysninger.