1. Introduktion
Thank you for choosing the GEWA Keyboard Stand KS-30B. This stand is designed to provide stable and adjustable support for your keyboard instrument. Constructed from high-quality steel tubing, it offers durability and ease of use. This manual provides essential information for the safe assembly, operation, and maintenance of your keyboard stand.
Image 1.1: The GEWA Keyboard Stand KS-30B in its fully assembled, upright position, showcasing its double-braced X-frame design.
2. Sikkerhedsinstruktioner
- Maksimal belastningskapacitet: Overskrid ikke den maksimale lastekapacitet på 30 kg (66 lbs). Overbelastning kan forårsage ustabilitet og skader.
- Stabil overflade: Always place the stand on a flat, stable, and non-slip surface to prevent tipping.
- Sikker placering: Ensure your instrument is securely placed on the stand's support arms.
- Fingersikkerhed: Exercise caution when adjusting the stand's height and width to avoid pinching fingers.
- Børn og kæledyr: Hold børn og kæledyr væk fra stativet under montering og justering.
- Regelmæssig inspektion: Periodically check all bolts and adjustment mechanisms for tightness and proper function.
3. Pakkens indhold
Kontroller, at alle komponenter er til stede, før du fortsætter med monteringen:
- GEWA Keyboard Stand KS-30B (pre-assembled main frame)
- Support arms (integrated)
- Adjustment knob (integrated)
- End caps/feet (integrated)
Note: The stand comes largely pre-assembled for convenience.
4. Opsætning og montering
The GEWA KS-30B Keyboard Stand is designed for quick and easy setup. No complex assembly is required.
- Fold stativet ud: Gently pull the two halves of the X-frame apart. The stand will begin to open.
- Locate the Adjustment Mechanism: Identify the central adjustment knob and the interlocking gear mechanism.
- Adjust Height and Width: Loosen the adjustment knob by turning it counter-clockwise. This will disengage the interlocking gears, allowing you to adjust the stand to your desired height and width. The stand's height and width are inversely related; as height increases, width decreases, and vice-versa.
- Secure the Adjustment: Once the desired position is achieved, tighten the adjustment knob by turning it clockwise until it is firm and the gears are securely engaged. Ensure there is no wobble.
- Place Instrument: Carefully place your keyboard or instrument onto the support arms of the stand. Ensure it is centered and stable.
- Tjek stabilitet: Before use, gently test the stand's stability with the instrument in place.
Billede 4.1: Nærbillede view of the stand's central adjustment knob and the interlocking gear mechanism, used for setting height and width.
Image 4.2: Another perspective of the adjustment knob and the gear system, showing how the two X-frame sections connect.
Billede 4.3: Frontal view of the adjustment knob, highlighting its ergonomic design for easy grip and turning.
5. Betjening og justering
The GEWA KS-30B allows for flexible adjustment to suit various playing positions and instrument sizes.
- Højdejustering: The stand can be adjusted in height from approximately 70 cm to 100 cm. To change the height, loosen the central knob, move the stand to the desired height, and then firmly tighten the knob.
- Breddejustering: The width of the stand automatically adjusts with the height. A lower height results in a wider stance, and a higher height results in a narrower stance.
- Sammenfoldning til opbevaring: To fold the stand for storage or transport, remove the instrument, loosen the central knob, and push the two halves of the X-frame together until fully collapsed. Tighten the knob to keep it folded.
Image 5.1: Detail of the protective end cap on one of the stand's feet, designed to prevent scratching floors and provide grip.
6. Vedligeholdelse
- Rensning: Wipe the stand with a soft, dry cloth to remove dust and dirt. For stubborn marks, use a slightly damp klud og mild sæbe, og tør derefter grundigt. Undgå slibende rengøringsmidler.
- Smøring: Periodically check the adjustment mechanism. If it becomes stiff, a small amount of silicone-based lubricant can be applied to the moving parts, avoiding contact with the instrument.
- Opbevaring: Store the stand in a dry environment, away from extreme temperatures and direct sunlight, to prevent material degradation.
7. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Stativet er vakkelvornt eller ustabilt. | Adjustment knob not fully tightened; uneven surface; overloaded. | Ensure the adjustment knob is firmly tightened. Move the stand to a flat, stable surface. Verify instrument weight does not exceed 30 kg. |
| Vanskeligheder med at justere højde/bredde. | Adjustment knob too tight; mechanism requires lubrication. | Loosen the adjustment knob completely before attempting to adjust. Apply a small amount of silicone lubricant to the moving parts if stiff. |
| Stand slides on floor. | Floor surface is too smooth; rubber feet are worn or missing. | Place a non-slip mat under the stand. Check if rubber feet are intact and replace if necessary. |
8. Specifikationer
| Model | KS-30B |
| Varemodelnummer | 900544 |
| Materiale | High-quality Steel Tube |
| Farve | Sort |
| Justerbar højde | 70 cm - 100 cm (ca. 27.5 - 39.4 tommer) |
| Depth of Support Arms | 40 cm (ca. 15.7 tommer) |
| Maksimal belastningskapacitet | 30 kg (66 lbs) |
| Varens vægt | 4 kg (8.8 lbs) |
| Produktdimensioner (foldet) | 55 x 7.5 x 102 cm (ca. 21.7 x 3 x 40.2 tommer) |
9. Garanti og support
GEWA products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your purchase or visit the official GEWA website. For technical support or inquiries, please contact GEWA customer service through their official channels.
Official GEWA Webwebsted: www.gewamusic.com