Seca 874 High Capacity Medical Floor Scale Instruction Manual

1. Introduktion

The Seca 874 is a high-capacity medical floor scale designed for accurate and reliable weight measurement in professional environments. This manual provides essential information for the proper setup, operation, and maintenance of your Seca 874 scale. Please read these instructions thoroughly before using the device to ensure safe and correct operation.

Figur 1: The Seca 874 High Capacity Medical Floor Scale. This image shows the top view of the scale, featuring a large, dark grey, non-slip weighing platform with a white border, and a separate digital display unit attached at the bottom. The display shows "0.00 kg" and "0.00" with unit indicators.

2. Sikkerhedsoplysninger

Overhold følgende sikkerhedsforanstaltninger for at forhindre personskade eller beskadigelse af enheden:

• Always place the scale on a firm, level, and stable surface to ensure accurate measurements.
• Overskrid ikke den maksimale vægtkapacitet på 200 kg (440 lbs).
• Hold vægten væk fra stærke elektromagnetiske felter.
• Undgå at udsætte vægten for ekstreme temperaturer, direkte sollys eller høj luftfugtighed.
• Do not disassemble or attempt to repair the scale yourself. Contact qualified service personnel.
• Keep the weighing platform clean and dry to prevent slips.

3. Pakkens indhold

Kontroller, at alle genstande er til stede og ubeskadigede ved udpakning:

• Seca 874 Medical Floor Scale
• Betjeningsvejledning
• Batteries (typically included, check packaging)

4. Opsætning

1. Udpakning: Carefully remove the scale and all components from the packaging. Retain packaging for future transport or storage.
2. Batteri installation:
   • Find batterirummet på undersiden af ​​vægten.
   • Åbn dækslet til rummet.
   • Insert the required batteries (e.g., 4 x AA) according to the polarity markings (+/-).
   • Luk batterirummets dæksel forsvarligt.
3. Placering: Place the Seca 874 scale on a hard, flat, and stable surface. Uneven or soft surfaces (like carpet) can affect measurement accuracy. Ensure there is sufficient space around the scale for safe use.

5. Betjening

5.1 Grundlæggende vejning

1. Tænd: Briefly tap the center of the weighing platform with your foot or press the power button (if present) to turn on the scale. The display will show "0.00 kg" (or lbs).
2. Træde på: Carefully step onto the center of the weighing platform with bare feet. Stand still and distribute your weight evenly.
3. Læs måling: Displayet viser din vægt. Vent på, at aflæsningen stabiliserer sig.
4. Gå væk: Step off the scale. The scale will typically hold the last measurement for a few seconds before automatically switching off (Auto-OFF function).

5.2 Mother/Child Function

This function allows for the precise weighing of infants or small children while held by an adult.

1. Weigh Adult: First, the adult steps onto the scale alone and waits for their weight to be displayed and stabilized.
2. Aktiver funktion: While the adult is still on the scale, press the dedicated Mother/Child button (refer to scale interface for exact button, if applicable, or assume automatic detection). The scale will tare the adult's weight to zero.
3. Weigh Child: The adult then steps off the scale, picks up the child, and steps back onto the scale. The display will now show only the child's weight.
4. Komplet: Step off the scale. The scale will return to normal operation or switch off.

5.3 Auto-HOLD Function

The Auto-HOLD function automatically freezes the weight display once a stable measurement is achieved, allowing the user to step off the scale and read the result comfortably.

• This function is typically activated automatically.
• Træd op på vægten og stå stille.
• Once the weight stabilizes, the display will indicate that the reading is held (e.g., by flashing or a specific symbol).
• You can then step off the scale, and the weight will remain displayed for a few seconds before the scale powers off.

6. Vedligeholdelse og pleje

• Rensning: Rengør vægten regelmæssigt med adamp cloth and a mild detergent. Do not use abrasive cleaners, solvents, or immerse the scale in water.
• Opbevaring: Opbevar vægten et tørt, køligt sted, væk fra direkte sollys og ekstreme temperaturer.
• Udskiftning af batteri: When the battery indicator appears on the display (e.g., "Lo"), replace all batteries with new ones of the same type. Dispose of old batteries according to local regulations.
• Kalibrering: The Seca 874 is factory-calibrated. If you suspect inaccuracies, contact Seca customer service or an authorized service center for recalibration.

7. Fejlfinding

8. Specifikationer

• Model: Seca 874
• Varemodelnummer: 8741321009
• Kapacitet: 200 kg / 440 lbs
• Graduering: 50 g (for weights < 150 kg), 100 g (for weights > 150 kg) / 0.1 lbs (for weights < 330 lbs), 0.2 lbs (for weights > 330 lbs)
• Minimum vægt: 2 kg
• Dimensioner (BxHxD): 315 x 58 x 313 mm (Scale platform)
• Produktmål (forsendelse): 17 x 14 x 5 tommer; 12 pund
• Skærmtype: Digital
• Særlige funktioner: Mother/child function, Manual/automatic switch-off, Auto-HOLD
• Fabrikant: Seca

9. Garanti og support

For detailed warranty information, technical support, or service inquiries regarding your Seca 874 scale, please refer to the official Seca website or contact their authorized customer service department. Keep your purchase receipt as proof of purchase.

Fabrikant: Seca

Visit the Seca Store on Amazon