Legrand CX³ Power Contactor 412505 User Manual

1. Introduktion

This manual provides essential information for the safe and efficient installation, operation, and maintenance of the Legrand CX³ Power Contactor, model 412505. Please read this manual thoroughly before using the product and retain it for future reference.

The Legrand CX³ Power Contactor 412505 is designed for controlling electrical circuits, conforming to standard NF EN 61095. It is compatible with up to 25 A comb-shaped bus bars.

2. Sikkerhedsoplysninger

ADVARSEL: Electrical shock hazard. Installation and maintenance should only be performed by qualified personnel. Disconnect all power before working on the contactor or connected circuits.

• Følg altid lokale og nationale elektriske forskrifter.
• Ensure the power supply matches the contactor's specifications.
• Betjen ikke kontaktoren, hvis den ser ud til at være beskadiget.
• Brug passende personlige værnemidler (PPE).

3. Produktbeskrivelse og funktioner

The Legrand CX³ Power Contactor 412505 is a compact and reliable device for switching electrical loads. Key features include:

• Model: 412505
• Coil Voltage: 24V
• Rated Current (I Max): 25 Amps
• Nominel voltage: 250V (Bipolar)
• Kontakttype: 2 Normally Open (2F)
• Antal moduler: 1
• Montering: DIN-skinneophæng
• Beskyttelsesvurdering: IP20
• Materiale: Kunststoff (housing), Copper (contacts)

4. Opsætning og installation

The contactor is designed for DIN rail mounting. Follow these steps for installation:

1. Strømafbrydelse: Ensure all power to the circuit is disconnected at the main breaker. Verify with a voltage tester.
2. Montering: Clip the contactor onto a standard DIN rail. Ensure it is securely fastened.
3. Wiring (Power Circuit):
   • Connect the incoming power lines to the main terminals (e.g., L1, L2).
   • Connect the load lines to the outgoing terminals (e.g., T1, T2).
   • Ensure all connections are tight using the clamp stik type.
4. Wiring (Control Circuit):
   • Connect the 24V control voltage to the coil terminals (A1, A2).
   • The control method is remote, typically via a switch or control system.
5. Verifikation: Dobbelttjek alle ledninger for korrekthed og sikkerhed, før du genopretter strømmen.

5. Betjeningsvejledning

The Legrand CX³ Power Contactor 412505 operates in an ON-OFF mode, controlled by its 24V coil.

• Aktivering: Apply 24V DC or AC (depending on coil type, typically AC for contactors unless specified) to the coil terminals (A1 and A2). This will energize the coil, closing the main contacts and allowing power to flow to the connected load.
• Deaktivering: Remove the 24V control voltage from the coil terminals. The coil will de-energize, opening the main contacts and disconnecting power from the load.
• Indikator: Some models may include a visual indicator to show the contactor's state (energized/de-energized).

Note: The contactor is designed for remote control. There is no manual control mechanism on this specific model (as per "Coil without Manual Control").

6. Vedligeholdelse

The Legrand CX³ Power Contactor 412505 is designed for minimal maintenance. However, periodic checks are recommended to ensure optimal performance and safety.

• Visuel inspektion: Undersøg regelmæssigt kontaktoren for tegn på fysisk skade, misfarvning eller løse forbindelser.
• Terminaltæthed: Periodically check that all terminal connections are secure. Loose connections can lead to overheating and failure.
• Rensning: If necessary, gently clean the exterior of the contactor with a dry, lint-free cloth. Do not use solvents or abrasive cleaners. Ensure power is disconnected before cleaning.
• Driftsmiljø: Sørg for, at driftsmiljøet forbliver inden for de angivne temperatur- og fugtighedsområder for at forhindre for tidlig slitage.

If any issues are observed, disconnect power and consult a qualified electrician.

7. Fejlfinding

Before troubleshooting, ensure all power is disconnected. Only qualified personnel should perform troubleshooting and repairs.

8. Specifikationer

9. Garanti og support

For garantioplysninger og teknisk support henvises til den officielle Legrand-forhandler. webwebstedet eller kontakt din lokale Legrand-distributør. Behold din købskvittering som købsbevis.