Indledning
The VOX StompLab 1G is a compact multi-effects modeling pedal designed for guitarists. It offers a wide array of sounds and effects, categorized by musical style for ease of use. This manual provides essential information for setting up, operating, and maintaining your StompLab 1G pedal.
Figur 1: Forside view of the VOX StompLab 1G Multi-Effects Modeling Guitar Pedal.
Produktegenskaber
- 100 forudindstillede programmer: A total of 100 preset programs are categorized into styles such as rock, blues, metal, and pop, allowing for quick sound selection.
- Brugervenlig grænseflade: Designed for intuitive operation, enabling even novice users to instantly access desired sounds.
- 103 Modeling Effects: Provides 103 types of modeling effects for diverse sound shaping.
- Avanceret lydmotor: Each effect model utilizes a sound engine derived from the acclaimed VOX VT+ series of modeling amps and ToneLab series multi-effect units.
- 20 brugerprogrammer: Allows users to edit and save up to 20 custom programs.
Opsætning
Powering the StompLab 1G
The StompLab 1G can be powered by either an AC adapter (9V DC) or four AA batteries. An AC adapter is recommended for stable performance, especially during extended use.
- AC-adaptertilslutning: Connect the 9V DC power adapter to the DC 9V input jack on the rear panel of the unit.
- Batteri installation: For portable use, install four AA batteries into the battery compartment located on the underside of the pedal. Refer to the "Maintenance" section for detailed battery installation instructions.
Tilslutning af dit udstyr
Tilslut din guitar til INPUT-stikket og din amplifier or headphones to the OUTPUT/PHONES jack. The OUTPUT/PHONES jack supports both stereo and mono connections.
Figure 2: Rear panel connections for input, output, and DC 9V power.
Video 1: This video provides an unboxing and initial overview of the StompLab 1G, demonstrating its physical features and basic connections.
Betjeningsvejledning
The StompLab 1G features an intuitive control layout for easy sound manipulation.
Kontrol overview
- KATEGORI Knap: Use this knob to select from various musical style categories (e.g., Rock & Roll, Blues, Pop, Jazz/Fusion, Ballad, Hard Rock, Metal, Hard Core, Other). Each category contains multiple preset programs.
- GAIN / VALUE1-knap: Adjusts the gain level of the selected effect or changes the value of parameters during editing.
- LEVEL / VALUE2-knap: Controls the overall output level or changes the value of parameters during editing.
- FOOTSWITCHES (DOWN/UP): These footswitches allow you to navigate through programs (DOWN/UP) and activate the Bypass/Tuner function by holding both simultaneously.
- REDIGER-knap: Used to enter edit mode for customizing programs.
- EFFECT TYPE Button: Selects the effect type within a program during editing.
Figure 3: Control panel with Category, Gain, Level knobs, and footswitches.
Valg af programmer
- Drej på KATEGORI knob to select a musical style.
- Brug NED og UP footswitches to cycle through the preset programs within the selected category. The display will show the program number.
Brug af tuneren
To activate the built-in tuner, press and hold both the NED og UP footswitches simultaneously. The display will show tuning information. Press either footswitch again to exit tuner mode.
Video 2: This video demonstrates various effects and sounds from the StompLab series, including the bass guitar version, showcasing the versatility of the pedal's modeling capabilities.
Opretholdelse
Udskiftning af batteri
To replace the batteries in your StompLab 1G, follow these steps:
- Sørg for, at enheden er slukket og frakoblet enhver strømkilde.
- Vend forsigtigt enheden på hovedet.
- Unscrew the four rubber feet on the bottom panel. These feet also secure the battery compartment cover.
- Remove the bottom panel to access the battery holder.
- Replace the old AA batteries with four new ones, ensuring correct polarity (+/-).
- Securely reattach the bottom panel and screw the four rubber feet back into place.
Video 3: This video demonstrates the process of adding or replacing batteries in the StompLab effects pedal.
Rensning
Tør enheden af med en blød, tør klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
Fejlfinding
- Ingen lyd:
- Kontroller alle kabelforbindelser (guitar til input, output til amp/headphones).
- Sørg for, at strømadapteren er korrekt tilsluttet, eller at batterierne er korrekt installeret og opladet.
- Kontroller, at enheden er tændt.
- Check the volume levels on the StompLab 1G, your guitar, and your amphøretelefoner/hovedtelefoner.
- Unexpected Sound/Distortion:
- Adjust the GAIN and LEVEL knobs.
- Ensure the correct program/effect is selected for your desired sound.
- Kontroller for defekte kabler.
- Enheden tænder ikke:
- Hvis du bruger batterier, skal du udskifte dem med nye.
- If using an AC adapter, ensure it is the correct 9V DC type and is functioning properly.
Specifikationer
| Modelnummer | STOMPLAB1G |
| Dimensioner | 7 x 2 x 7 tommer |
| Varens vægt | 2.72 ounce |
| Strømkilde | Battery Powered (4 AA batteries) and AC Adapter (9V) |
| Kropsmateriale | Metal |
| Farve | Sort |
| Connector Type | 1/4 inch jack |
| Hardware-interface | 1/4-tommer lyd |
| Signalformat | Analog |
Hvad er der i æsken
- VOX StompLab 1G Multi-Effects Modeling Guitar Pedal
- Strømadapter
- Brugervejledning (dette dokument)
- 4 AA-batterier (forinstalleret eller medfølger separat)
Garanti og support
For warranty information and technical support, please refer to the official VOX website or contact your local VOX dealer. Keep your purchase receipt as proof of purchase for warranty claims.
