LAMP HG-CV65 Renrumshængsel Brugsanvisning

1. Introduktion

This manual provides comprehensive instructions for the installation, operation, and maintenance of the LAMP HG-CV65 Clean Room Hinge. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product.

Den L.AMP HG-CV65 is a high-quality lift-off hinge designed for applications requiring specific environmental controls, such as clean rooms. It features a durable bronze material with an alumite finish, offering a load capacity of 17.5 lbs. Its design allows for a 180-degree range of motion and is suitable for right-hand orientation doors.

2. Sikkerhedsoplysninger

• Brug altid passende personlige værnemidler (PPE) under installationen.
• Ensure the mounting surface is stable and capable of supporting the hinge and door weight.
• Do not exceed the specified load capacity of 17.5 lbs.
• Handle the hinge carefully to avoid damage to the finish or components.

3. Produktspecifikationer

4. Pakkens indhold

• 1 x L.AMP HG-CV65 Clean Room Hinge
• Monteringshardware (skruer)

5. Opsætning og installation

Den L.AMP HG-CV65 is a full surface, right-hand orientation lift-off hinge. Proper installation is crucial for optimal performance.

5.1 Nødvendigt værktøj

• Screwdriver (appropriate for mounting hardware)
• Målebånd
• Blyant eller tusch
• Drill (if pre-drilling is necessary for mounting surface)

5.2 Installationstrin

1. Forbered døren og karmen: Ensure both the door and the door frame surfaces are clean, flat, and free from obstructions where the hinge will be mounted.
2. Position the Hinge: For a right-hand orientation, position the hinge leaf with the pin facing upwards on the door frame, and the other leaf on the door. The hinge is designed to lift off, meaning the door can be removed by lifting it vertically off the pin.
3. Marker monteringspunkter: Hold the hinge firmly in the desired position. Use a pencil or marker to accurately mark the locations for the mounting screws through the pre-drilled holes on both hinge leaves.
4. Pre-drill Pilot Holes (if necessary): Depending on the door and frame material, it may be necessary to pre-drill pilot holes at the marked locations. Ensure the pilot holes are of appropriate size to prevent splitting and allow for secure screw insertion.
5. Attach Hinge to Frame: Secure one leaf of the hinge to the door frame using the provided mounting hardware. Ensure it is level and tightly fastened.
6. Attach Hinge to Door: Align the second leaf of the hinge with the marked positions on the door. Secure it using the provided mounting hardware.
7. Test drift: Carefully open and close the door to ensure smooth operation and proper alignment. Verify that the door can be lifted off the hinge pin if required.

Figur 1: LAMP HG-CV65 Clean Room Hinge. This image shows the hinge in its open position, highlighting the two leaves, the central pin, and the four screw holes on each leaf for full surface mounting.

6. Betjening

Den L.AMP HG-CV65 hinge is designed for simple and reliable operation. Once installed, the door will pivot smoothly on the hinge pin, allowing for a 180-degree range of motion.

• Åbning/lukning: Apply gentle force to open or close the door. Avoid slamming the door, as this can cause premature wear.
• Lift-Off Feature: To remove the door, lift it vertically upwards until it clears the hinge pin. This feature is useful for maintenance or temporary removal of the door.

7. Vedligeholdelse

Regular maintenance ensures the longevity and optimal performance of your LAMP HG-CV65 hinge.

• Rensning: Periodically wipe the hinge surfaces with a soft, damp cloth. For clean room environments, use approved cleaning agents and procedures. Avoid abrasive cleaners or solvents that could damage the alumite finish.
• Smøring: The hinge features a bushing design for smooth operation. If any squeaking or stiffness occurs, a small amount of dry lubricant (e.g., PTFE-based spray) can be applied to the pin and bushing areas. Avoid oil-based lubricants in clean room settings unless specifically approved.
• Fastgørelseskontrol: Annually, or as needed, check all mounting screws for tightness. Re-tighten any loose screws to prevent hinge sag or misalignment.
• Inspektion: Inspect the hinge for any signs of wear, damage, or corrosion. Replace the hinge if significant damage is observed.

8. Fejlfinding

9. Garanti og support

For warranty information or technical support regarding your LAMP HG-CV65 Clean Room Hinge, please contact your authorized dealer or the manufacturer directly. Keep your purchase receipt as proof of purchase.

Producent: LAMP