RAB Lighting FFLED39 Future Flood LED Light User Manual

1. Produktet er slutview

The RAB Lighting FFLED39 Future Flood LED Light is a high-performance, energy-efficient outdoor floodlight designed for various applications. This hardwired fixture features a durable bronze finish and provides cool white illumination.

Figure 1: RAB Lighting FFLED39 Future Flood LED Light

Nøglefunktioner:

• Magt: 39-watt LED
• Farvetemperatur: 5100K Cool White
• Levetid: 100,000 hours based on LM-80 tests
• lysdioder: Three multi-chip 13-watt high-performance LEDs
• Optik: NEMA type 7H x 6V with Air-flow technology heatsink
• Refleks: Semi-specular anodized aluminum
• Pakninger: Højtemperatur silikone
• Slutte: Bronze chip and fade-resistant polyester powder coat
• Voltage: 120-volt to 277-volt operation

2. Sikkerhedsoplysninger

Read all instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or other hazards. Keep this manual for future reference.

• Elektrisk sikkerhed: Installationen skal udføres af en kvalificeret elektriker i overensstemmelse med alle nationale og lokale el-forskrifter. Sørg for, at strømmen er afbrudt ved afbryderen før installation eller service.
• Jording: The fixture must be properly grounded to prevent potential electric shock.
• Montering: Ensure the mounting surface is structurally sound and capable of supporting the fixture's weight (approximately 10.23 lbs).
• Driftstemperatur: Brug ikke armaturet uden for det angivne temperaturområde.
• lysdioder: Do not stare directly into the LED light source when the fixture is operating, as this may cause eye damage.

3. Installation

This floodlight is designed for wall mounting and requires hardwired installation. Professional installation is recommended.

Nødvendige værktøjer:

• Skruetrækker (Phillips og fladhoved)
• Afisoleringstænger
• Tang
• Drill (if mounting surface requires pilot holes)
• Justerbar skruenøgle

Monteringsmuligheder:

The FFLED39 supports various mounting options. The standard fixture comes with a wall mount. Optional accessories may include slipfitter mounts or other specialized brackets.

Figur 2: Eksample of a Slipfitter Mount (optional accessory)

Installationstrin:

1. Afbryd strømmen: Turn off power at the circuit breaker before beginning installation. Verify power is off using a voltage tester.
2. Forbered monteringsoverfladen: Securely attach the mounting bracket to the desired wall location. Ensure the bracket is level and firmly fastened.
3. Ledningsforbindelser:
   • Connect the black wire from the fixture to the hot (L) wire from the power supply.
   • Connect the white wire from the fixture to the neutral (N) wire from the power supply.
   • Tilslut den grønne eller bare kobberledning fra armaturet til jordledningen fra strømforsyningen.
   • Use appropriate wire connectors and ensure all connections are secure.
4. Monteringsbeslag: Attach the FFLED39 fixture to the mounting bracket. Secure it with the provided screws or bolts.
5. Juster mål: Loosen the adjustment screws on the fixture to aim the light as desired. Tighten the screws firmly once the desired angle is achieved.
6. Gendan strøm: Turn on power at the circuit breaker. Test the fixture for proper operation.

4. Betjening

The RAB Lighting FFLED39 is a hardwired floodlight. Its operation is typically controlled by an external switch or a photocell (if installed).

Standarddrift:

• Once installed and wired, the fixture will illuminate when power is supplied via the connected wall switch or control system.
• Ensure the power source is within the specified 120-277V range.

Photocell Control (Optional):

If a photocell is integrated or installed with the fixture, the light will automatically turn on at dusk and off at dawn, based on ambient light levels.

Figur 3: Eksample of a Photocell (optional accessory)

5. Vedligeholdelse

The FFLED39 LED floodlight is designed for minimal maintenance due to its long-life LED components and durable construction.

Rensning:

• Ydre: Rengør armaturets yderside regelmæssigt med en blød, tør klud.amp cloth to remove dirt, dust, and debris. Do not use abrasive cleaners or solvents.
• Linse: Gently wipe the lens with a clean, soft cloth to ensure maximum light output.

Inspektion:

• Undersøg regelmæssigt armaturet for tegn på skader, løse forbindelser eller slid.
• Sørg for, at alt monteringsudstyr forbliver stramt og sikkert.
• If any damage is observed, disconnect power and contact a qualified electrician for repair or replacement.

6. Fejlfinding

If you experience issues with your FFLED39 floodlight, refer to the following troubleshooting guide:

If the problem persists after following these steps, contact RAB Lighting customer support or a qualified electrician.

7. Specifikationer

Detailed technical specifications for the RAB Lighting FFLED39 Future Flood LED Light:

Figure 4: Indication of 100,000-hour LED lifespan

8. Garanti og support

Producentens garanti:

The RAB Lighting FFLED39 Future Flood LED Light is covered by a 1 års producentgaranti fra købsdatoen. Denne garanti dækker materiale- og fabrikationsfejl under normal brug og service.

The warranty does not cover damage resulting from improper installation, accident, misuse, abuse, negligence, or unauthorized modification or repair.

Kundesupport:

For technical assistance, warranty claims, or further information, please contact RAB Lighting customer support. Refer to the official RAB Lighting webwebstedet for aktuelle kontaktoplysninger.