Indledning
This manual provides essential instructions for the safe operation, maintenance, and troubleshooting of your BIG RED T825013S1 Torin Hydraulic Trolley Floor Jack. This 2.5-ton (5,000 lb) capacity floor jack is designed for lifting vehicles for service and maintenance. Please read and understand all instructions before use to ensure safety and proper function.
Image: The BIG RED T825013S1 Hydraulic Trolley Floor Jack, red in color, with its handle detached, resting on a white background.
Sikkerhedsoplysninger
WARNING: Read, understand, and follow all instructions before operating this device. Failure to observe these warnings may result in property damage, personal injury, or death.
- Always use this jack on a hard, level surface.
- Overskrid ikke den nominelle kapacitet på 2.5 tons (5,000 lbs).
- This jack is a lifting device only. Immediately after lifting, support the vehicle with appropriate jack stands. Do not work under a vehicle supported only by a jack.
- Ensure the vehicle is in park (or gear) with the parking brake engaged and wheels chocked before lifting.
- Center the load on the saddle. Off-center loads can cause instability.
- Do not use the jack for purposes other than lifting vehicles.
- Hold hænder og fødder væk fra bevægelige dele.
- Advarsel om Californiens Proposition 65: Dette produkt kan udsætte dig for kemikalier, herunder bly, som staten Californien ved kan forårsage kræft og fødselsdefekter eller andre reproduktionsskader. For mere information, gå til www.P65Warnings.ca.gov.
Hvad er der i æsken
Your BIG RED T825013S1 Hydraulic Trolley Floor Jack package includes the following components:
- 1 x 2.5-ton trolley jack
- 1 x Jack handle (multi-piece for assembly)
- 1 x Plastic blow mold carrying storage case
Image: The BIG RED T825013S1 floor jack, its handle, and the blow mold carrying case, all neatly packed.
Opsætning
- Udpakning: Fjern alle komponenter fra bæretasken.
- Håndtagssamling: Insert the lower handle section into the handle socket on the jack. Secure it if there's a locking mechanism (refer to specific diagrams if available). Then, attach the upper handle section to the lower section.
- Bleeding the Hydraulic System:
- Drej udløsningsventilen mod uret for at åbne den.
- Pump the handle several times to remove any air from the hydraulic system.
- Drej udløserventilen med uret for at lukke den.
- Test drift: Before first use, test the jack without a load. Pump the handle to raise the saddle to its maximum height, then slowly open the release valve to lower it. Ensure smooth operation.
Video: Official demonstration of the BIG RED T825013S1 Hydraulic Trolley Floor Jack in operation, showcasing its lifting capabilities.
Betjeningsvejledning
- Klargør køretøjet: Parkér køretøjet på en hård, plan overflade. Aktivér parkeringsbremsen, og placer hjulklodser på de hjul, der skal forblive på jorden.
- Placer donkraften: Locate the vehicle manufacturer's recommended lifting points. Position the jack so the saddle is directly under the lifting point. Ensure the jack's wheels are free to move.
- Løft køretøjet: Turn the release valve clockwise until it is firmly closed. Pump the jack handle to raise the vehicle to the desired height. Lift only high enough to place jack stands.
- Sikres med donkrafte: Immediately place appropriately rated jack stands under the vehicle's frame or designated support points. Ensure the jack stands are stable and locked.
- Lower onto Jack Stands: Slowly turn the release valve counter-clockwise to lower the vehicle onto the jack stands. Once the vehicle is securely resting on the jack stands, remove the floor jack.
- Lowering Completely: When ready to lower the vehicle completely, reposition the jack under the lifting point, raise the vehicle slightly to remove the jack stands, then slowly turn the release valve counter-clockwise to lower the vehicle to the ground.
Image: The BIG RED T825013S1 floor jack positioned under a vehicle's frame, with two red jack stands providing additional support.
Opretholdelse
- Smøring: Periodically lubricate moving parts with light grease or oil.
- Hydraulisk olie: Check the hydraulic oil level regularly. To do this, lower the jack completely, remove the oil filler plug, and ensure the oil level is just below the filler hole. Use only high-quality hydraulic jack oil.
- Rensning: Hold donkraften ren for snavs, fedt og ætsende materialer.
- Opbevaring: Store the jack in its carrying case in a dry, protected area when not in use. Ensure the jack is fully lowered before storage.
- Inspektion: Before each use, inspect the jack for any damage, leaks, or loose parts. Do not use a damaged jack.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Donkraften løfter ikke lasten. | Release valve open; low hydraulic oil; air in system; overloaded. | Close release valve; add hydraulic oil; bleed air from system; reduce load (do not exceed capacity). |
| Donkraften løfter sig langsomt eller uregelmæssigt. | Low hydraulic oil; air in system. | Add hydraulic oil; bleed air from system. |
| Jack leaks fluid. | Damaged seals or components. | Kontakt kundesupport for reparation eller udskiftning. |
| Jack vil ikke sænke. | Release valve stuck or obstructed. | Ensure release valve is fully open; check for obstructions. |
Specifikationer
- Modelnummer: T825013S1
- Belastningskapacitet: 2.5 Ton (5,000 lb)
- Minimum Lifting Height: 5.5 tommer
- Maksimal løftehøjde: 14.13 tommer
- Materiale: Legeret stål
- Varens vægt: 31.3 pund
- Emnedimensioner (LxBxH): 23.5 x 10.25 x 7 tommer
- Farve: Rød
- Køretøjsservicetype: Bil (Universal Fit)
Image: Diagram illustrating the minimum and maximum lifting heights of the BIG RED T825013S1 floor jack.
Garanti og support
This BIG RED T825013S1 Hydraulic Trolley Floor Jack includes a limited 1-year manufacturer warranty. For warranty claims, technical support, or replacement parts, please contact Torin Inc. customer service. Keep your purchase receipt for warranty validation.
For further assistance, visit the official BIG RED store on Amazon: BIG RED Store.