Hitron HB-2 Digital Bass Reconstruction Processor

Indledning

The Hitron HB-2 is a state-of-the-art digital bass reconstruction processor designed to enhance the low-frequency response of your car audio system. It restores and enhances bass frequencies that are often lost during the recording or compression process, providing a richer and more dynamic audio experience. This unit features a convenient dash-mount remote control for on-the-fly adjustments.

Sikkerhedsoplysninger

• Frakobl altid køretøjets batteri, før du påbegynder nogen form for installation.
• Professionel installation anbefales kraftigt for at sikre korrekt ledningsføring og funktionalitet.
• Udsæt ikke enheden for fugt eller ekstreme temperaturer.
• Sørg for, at alle ledningsforbindelser er sikre og korrekt isolerede for at forhindre kortslutninger.
• Mount the unit in a location that does not obstruct the driver's view eller forstyrre køretøjets drift.

Pakkens indhold

Tjek venligst pakken for følgende varer:

• Hitron HB-2 Digital Bass Reconstruction Processor Unit
• Dash-Mount Remote Control
• Kabel til fjernbetjening
• Power and Signal Wiring Harness

Opsætning og installation

Mounting the HB-2 Unit

Choose a secure, dry location for mounting the HB-2 unit, such as under a seat or behind the dashboard. Ensure adequate ventilation around the unit. Use screws to firmly attach the unit to a flat surface.

Billede: The main Hitron HB-2 unit, showing input/output connections and control knobs.

Ledningsforbindelser

1. Strømtilslutning: Connect the +12V wire to a constant +12V power source, the GND wire to a solid chassis ground, and the REM (remote) wire to your head unit's remote turn-on output.
2. Lydindgang: Connect your head unit's RCA outputs to the HB-2's balanced RCA inputs.
3. Lydudgang: Connect the HB-2's RCA outputs to your amplifiers RCA-indgange.
4. Fjernbetjening: Connect the dash-mount remote control cable to the dedicated port on the HB-2 unit.

Billede: The dash-mount remote control with its connecting cable, used for adjusting bass levels.

Betjeningsvejledning

Controls on the HB-2 Unit

• MAX BASS CONTROL: Adjusts the overall intensity of the bass reconstruction. Start with a lower setting and increase gradually.
• FREQ CONTROL: Selects the center frequency for the bass reconstruction. This allows you to target specific bass frequencies for enhancement.
• WIDE/NARROW Switch: Determines the Q-factor or bandwidth of the bass reconstruction. 'Wide' affects a broader range of frequencies around the center frequency, while 'Narrow' focuses on a tighter range.

Dash-Mount Remote Control

The remote control allows you to adjust the bass output level from your listening position. Rotate the knob to increase or decrease the bass intensity. The illuminated display provides visual feedback.

Opretholdelse

• Hold enheden ren ved at tørre den af ​​med en blød, tør klud. Brug ikke skrappe kemikalier eller slibende rengøringsmidler.
• Sørg for, at alle forbindelser er sikre. Kontroller jævnligt ledningerne for tegn på slid eller skader.
• Avoid blocking the ventilation openings on the unit to prevent overheating.

Fejlfinding

• Ingen strøm: Check the +12V, Ground, and Remote connections. Ensure the remote turn-on signal from the head unit is active. Check for blown fuses in the power line.
• Ingen basoutput: Verify all RCA input and output connections. Ensure the HB-2 unit is powered on. Adjust the 'MAX BASS CONTROL' and 'FREQ CONTROL' settings. Check the remote control connection.
• Forvrænget lyd: Reduce the 'MAX BASS CONTROL' setting. Ensure the input signal from the head unit is not overdriven. Check ampindstillinger for forstærkning.
• Fjernbetjeningen reagerer ikke: Check the cable connection between the remote and the HB-2 unit.

Specifikationer

Garanti og support

For warranty information, please refer to the documentation provided with your purchase. For technical assistance or support, please contact your authorized Hitron dealer or the point of purchase.