TV 5363

Televes 5363 Multiband Amplivligere brugervejledning

Model: 5363 | Mærke: TELEVES

1. Introduktion

The Televes 5363 Minikom FI 2150 MHz Multiband Amplifier is designed for SMATV systems. This broadband amplifier, housed in a Zamak casing, features switched-mode power supplies and allows for independent mixing of MATV signals.

Nøglefunktioner:

  • Bredbånd amplifikation.
  • Incorporates switched-mode power supplies.
  • Allows mixing of MATV signals via an independent input.
  • Kompakte mål: 180 x 110 x 55 mm.
  • High-shielding chassis, manufactured from Zamak.
  • Adskille amplification with very low noise figure, preserving signal quality.
  • Ultra-reduced ergonomic design.
Televes 5363 Multiband Ampløfter, bag view showing multiple F-connectors for inputs and outputs.

Figur 1: Bagside view of the Televes 5363 Multiband Amplifier, highlighting the F-connectors for signal inputs and outputs.

2. Sikkerhedsoplysninger

Please read all safety instructions before installing or operating this device. Failure to follow these instructions may result in electric shock, fire, or damage to the product.

  • Strømforsyning: Ensure the device is connected to a power outlet with the correct voltage og frekvens som angivet i de tekniske specifikationer.
  • Ventilation: Do not block any ventilation openings. Install the device in a location with adequate airflow to prevent overheating.
  • Fugtighed: Do not expose the device to rain, moisture, or excessive humidity. Avoid installing in damp miljøer.
  • Rensning: Disconnect the device from the power supply before cleaning. Use a dry, soft cloth. Do not use liquid cleaners or aerosol sprays.
  • Service: Forsøg ikke selv at servicere dette produkt. Overlad al service til kvalificeret servicepersonale.
  • Montering: Ensure the device is securely mounted on a stable surface to prevent it from falling.

3. Pakkens indhold

Bekræft at alle varer er til stede i pakken:

  • Televes 5363 Multiband Amplivligere
  • Power cable (integrated or separate, depending on model variant)
  • Instruktionsmanual (dette dokument)
  • Monteringstilbehør (skruer, vægdyvler)

4. Opsætning og installation

The Televes 5363 amplifier is designed for surface mounting. Follow these steps for proper installation:

4.1. Montering af Amplivligere

  1. Choose a suitable location for mounting, ensuring it is dry, well-ventilated, and easily accessible for connections.
  2. Mark the positions for the mounting screws on the wall or surface.
  3. Bor om nødvendigt forhuller, og isæt vægdyvler.
  4. Sikre den ampløfteren ved hjælp af passende skruer.

4.2. Connecting Signals

De amplifier features two inputs for different signal bands and an output for the mixed signal. It utilizes an EasyF connection system for reliable connections.

Close-up of the Televes 5363 amplifier inputs, showing SAT, UHF, and VHF connections and switches.

Figure 2: Detail of the input connections and configuration switches on the Televes 5363 amplivligere.

  1. VHF/UHF Input: Connect your terrestrial antenna (VHF/UHF) signal cable to the designated input.
  2. SAT Input: Connect your satellite dish signal cable to the designated SAT input.
  3. Produktion: Tilslut udgangen på amplifier to your SMATV distribution network or directly to your television/receiver.

4.3. Strømtilslutning

Tilslut strømkablet til amplifier and then to a suitable electrical outlet. The amplifier incorporates switched-mode power supplies for efficient operation.

Front view of the Televes 5363 amplifier showing the power input and general casing.

Figur 3: Forside view of the Televes 5363 Multiband Amplifier, showing the power input.

5. Betjening

The Televes 5363 amplifier is designed for straightforward operation. Once installed and powered, it will amplify and mix the incoming signals.

5.1. Signal Mixing

De amplifier automatically mixes the VHF/UHF terrestrial signals with the satellite (SAT) signals into a single output. This allows for a combined distribution of both signal types through a single cable.

5.2. Forstærkningsjustering

De amplifier provides a gain of 45 dB for the satellite band and an output level of 124 dBuV. Specific gain adjustments for VHF/UHF may be available via internal potentiometers or switches, depending on the exact model variant. Refer to the markings on the device for any adjustable settings.

6. Vedligeholdelse

To ensure optimal performance and longevity of your Televes 5363 Multiband AmpLifier, følg disse enkle vedligeholdelsesretningslinjer:

  • Rensning: Rengør jævnligt ydersiden af amplifier with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Ventilation: Ensure that the ventilation slots are free from dust and obstructions to prevent overheating.
  • Forbindelser: Kontrollér lejlighedsvis alle kabelforbindelser for at sikre, at de er fastgjorte og fri for korrosion.
  • Miljø: Behold ampOpbevar apparatet i et tørt, køligt miljø, væk fra direkte sollys og ekstreme temperaturer.

7. Fejlfinding

If you encounter issues with your Televes 5363 Multiband AmpLifier, se følgende almindelige problemer og løsninger:

  • Intet signal:
    • Check all cable connections to ensure they are properly seated.
    • Bekræft, at amplifier is receiving power (check power indicator light if available).
    • Ensure the input signals from the terrestrial antenna and satellite dish are present and strong enough.
  • Weak or Poor Quality Signal:
    • Check the quality of the input signals before they reach the amplivligere.
    • Ensure all connections are tight and free from damage or corrosion.
    • Bekræft, at amplifier's gain settings (if adjustable) are appropriate for your installation.
  • Ingen strøm:
    • Check the power cable connection to both the amplifier and the electrical outlet.
    • Test stikkontakten med en anden enhed for at sikre, at den fungerer.

Hvis problemet fortsætter efter at have forsøgt disse løsninger, skal du kontakte kvalificeret teknisk support.

8. Tekniske specifikationer

FeatureSpecifikation
Modelnummer5363
FabrikantFjernsyn
MaterialeZamak
Antal indgange2 (VHF/UHF, SAT)
Output Level (Vs)124 dBuV
Gain (SAT)45 dB
FrekvensområdeUp to 2150 MHz (FI)
MonteringstypeOverflademontering
Dimensioner (L x B x H)180 x 110 x 55 mm
Produktets vægt950 g
StrømforsyningSwitched-mode power supply (internal)
Batterier påkrævetIngen

9. Garanti og support

This Televes product is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Televes webwebsted.

For technical support, service, or inquiries regarding your Televes 5363 Multiband Amplifier, please contact your local dealer or the Televes customer service department. Contact information can typically be found on the product packaging or the official Televes webwebsted.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.