BONTEC TV Wall Bracket User Manual

1. Introduktion

Thank you for choosing the BONTEC TV Wall Bracket. This full-motion wall mount is designed to securely hold 37-80 inch LED LCD flat and curved screen televisions, offering exceptional flexibility for optimal viewing angles. Manufactured from reinforced, compressed steel, it ensures durability and safety for your television. This manual provides essential information for safe installation, operation, and maintenance of your TV wall bracket.

2. Sikkerhedsoplysninger

Please read all instructions carefully before installation and use. Failure to follow these instructions may result in serious personal injury, property damage, or voiding of your warranty.

• Vægt kapacitet: Overskrid ikke den maksimale lastvægt på 65 kg (144 lbs).
• Vægtype: This bracket is designed for installation on wood studs, concrete walls, or brick walls. DO NOT MOUNT ON DRYWALL ALONE without securing to a stud or using appropriate heavy-duty anchors for hollow walls.
• Professionel installation: Hvis du er usikker på installationsprocessen eller din vægs egnethed, bør du kontakte en kvalificeret fagmand.
• Tjek VESA-mønster: Ensure your TV's VESA pattern is compatible with the bracket before beginning installation.
• Sikre fastgørelsesanordninger: Ensure all screws and bolts are securely tightened before mounting the TV. Do not overtighten.
• Kabelstyring: Route cables carefully to prevent pinching or damage when adjusting the TV.

3. Pakkens indhold

Verify that all components are present and undamaged before installation. If any parts are missing or defective, contact BONTEC customer support.

Billede: Overview of included fitting hardware and TV mounting screws.

• TV Wall Bracket Assembly
• Wall Anchors (M8*90mm Lag Bolts, M10*80mm Concrete Anchors)
• Assembly Hardware (M6*6mm, M6*10mm screws, M8 Washers, M8 Cushioned Nuts, M6 Plastic Washers, M6 Wrench)
• TV Mounting Screws (Various sizes: M4*12mm, M4*30mm, M6*20mm, M6*35mm, M8*20mm, M8*35mm, M8*50mm)
• Spacers (20mm M6/M8, 13mm M4, 5mm M6/M8)
• Washers (M4, M6, M8)
• 1.8 m HDMI-kabel
• vaterpas
• Illustrerede instruktioner

4. Specifikationer

Image: TV size and VESA compatibility overview.

5. Opsætning og installation

Follow these steps for a secure and efficient installation. It is recommended to have at least two people for installation, especially when mounting the TV.

5.1. Kontrol før installation

1. Bekræft tv-kompatibilitet: Check your TV's VESA pattern and weight against the specifications.
2. Identificer vægtype: Determine if your wall is wood stud, concrete, or brick. Use the appropriate anchors and drilling methods.
3. Find stolper (til trævægge): Use a stud finder to accurately locate the center of wood studs.
4. Ryd område: Ensure the installation area is clear of obstructions, electrical wires, and plumbing.

Image: Diverse wall compatibility information.

5.2. Montering af vægpladen

1. Placer skabelonen: Hold the wall plate or use the provided template against the wall at your desired height. Use the spirit level to ensure it is perfectly horizontal.
2. Marker borehuller: Marker borepunkterne gennem hullerne på vægpladen.
3. Bore huller: Drill pilot holes according to the marked points and the type of wall. For concrete/brick, use a masonry drill bit and insert concrete anchors. For wood studs, drill pilot holes directly into the center of the studs.
4. Fastgør vægplade: Fastgør vægpladen til væggen med de passende trækbolte og skiver. Spænd godt fast, men overspænd ikke.

5.3. Montering af beslag på tv'et

1. Lay TV Face Down: Placer forsigtigt dit tv med forsiden nedad på en blød, ren overflade for at undgå ridser.
2. Fastgør TV-beslag: Align the vertical TV brackets with the VESA mounting holes on the back of your TV. Use the correct size screws and spacers from the provided hardware kit. Ensure the brackets are securely fastened.

5.4. Hanging the TV and Final Adjustments

1. Hæng TV op: With assistance, carefully lift the TV and hook the TV brackets onto the wall plate. Ensure the TV is securely seated on the wall plate.
2. Sikkert TV: Use the safety screws or locking mechanisms on the TV brackets to secure the TV to the wall plate, preventing accidental dislodgement.
3. Juster niveau: Use the ±3° rotation adjustment feature to fine-tune the TV's level if needed.

Image: Easy installation steps.

6. Betjening og justeringer

The BONTEC TV Wall Bracket offers full motion capabilities for an optimized viewoplevelse.

6.1. Drejejustering

Gently push or pull the TV to swivel it up to 45° left or right. This allows you to direct the screen towards different viewing areas in your room.

Image: Swivel adjustment for optimal viewing.

6.2. Hældningsjustering

To adjust the vertical tilt, gently push the top or bottom of the TV. The bracket allows for a tilt of +5° up and -15° down, helping to reduce glare and improve viewkomfort.

Image: Tilt and level adjustment features.

6.3. Udvidelse og tilbagetrækning

The dual arms allow the TV to extend up to 360mm from the wall and retract to a low profile of 60mm, saving space when not in use.

6.4. Kabelforvaltning

Utilize the integrated cable management system on the bracket arms to neatly route and conceal unsightly cables, maintaining a clean and tidy appearance.

7. Vedligeholdelse

Regelmæssig vedligeholdelse sikrer din TV-vægbeslags levetid og sikre drift.

• Rensning: Wipe the bracket with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the finish.
• Periodiske kontroller: Periodically check all mounting screws and bolts to ensure they remain tight and secure. Over time, vibrations or adjustments may cause them to loosen slightly.
• Smøring: The moving parts are designed for smooth operation and generally do not require lubrication. If movement becomes stiff, consult BONTEC customer support.

8. Fejlfinding

If you encounter any issues with your BONTEC TV Wall Bracket, refer to the following common problems and solutions.

• TV'et er ikke i vater: Use the ±3° rotation adjustment feature to fine-tune the level. Ensure the wall plate was installed horizontally using the spirit level.
• Bracket feels unstable or sags:
  1. Verify that the TV weight does not exceed the 65 kg (144 lbs) maximum capacity.
  2. Ensure all wall mounting bolts and TV attachment screws are securely tightened.
  3. Confirm that the bracket is mounted to appropriate wall studs or solid concrete/brick, not just drywall.
• Difficulty adjusting the TV (swivel/tilt/extension):
  1. Kontroller for eventuelle forhindringer, der forhindrer bevægelse.
  2. Sørg for, at der ikke sidder kabler fast i de bevægelige dele.
  3. The joints are designed to be firm to hold the TV's position. Apply gentle, steady pressure.

If the problem persists after attempting these solutions, please contact BONTEC customer support for further assistance.

9. Garanti og support

For information regarding warranty coverage, returns, or technical support, please refer to the documentation provided at the time of purchase or visit the official BONTEC webwebstedet. Behold din købskvittering som købsbevis.

BONTEC Customer Service: Please refer to the contact information provided on the product packaging or the official BONTEC webwebsted for de mest opdaterede supportkanaler.