Selve i-R Receive Radio Receiver Instruction Manual

1. Introduktion

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Selve i-R Receive radio receiver. Please read this manual carefully before installation and operation to ensure proper function and safety.

The Selve i-R Receive is designed to receive radio signals from Selve radio transmitters operating at 868 MHz, enabling control of connected devices such as roller shutters or awnings.

2. Sikkerhedsinstruktioner

Overhold altid følgende sikkerhedsforanstaltninger:

• Installationen skal udføres af en kvalificeret elektriker i overensstemmelse med lokale el-forskrifter og -regler.
• Afbryd strømmen, før du udfører installation, vedligeholdelse eller fejlfinding.
• Udsæt ikke enheden for fugt eller ekstreme temperaturer.
• Sørg for korrekt jording for at forhindre elektrisk stød.
• Åbn ikke enhedens kabinet. Der er ingen dele indeni, som brugeren kan servicere.

3. Produktet er slutview

The Selve i-R Receive is a compact radio receiver designed for integration into electrical systems. It features terminals for input and output connections and a programming button.

Figur 3.1: Forside view of the Selve i-R Receive showing input/output terminals and programming button.

Figur 3.2: Bagside view of the Selve i-R Receive indicating the programming button location.

Figur 3.3: Vinklet view of the Selve i-R Receive, highlighting its compact design.

Figure 3.4: The Selve i-R Receive unit alongside its packaging.

Figur 3.5: Nederst view of the Selve i-R Receive, showing the "PROG" label and button.

Figur 3.6: Side view of the Selve i-R Receive, illustrating the antenna cable exit point.

Figure 3.7: Functional example diagram showing the Selve i-R Receive connected to a roller shutter and controlled by an i-R Transmit unit.

4. Tekniske specifikationer

5. Opsætning og installation

Vigtig: Installation must be carried out by a qualified electrician. Disconnect the main power supply before beginning installation.

5.1 Ledningsforbindelser

Refer to the wiring diagram on the device and in Figure 3.7 for correct connections. The terminals are typically labeled as follows:

• I: Power input (L - Live, N - Neutral).
• UD: Output to the motor/device (e.g., for roller shutters: Up, Down, Neutral).
• Sørg for, at alle forbindelser er sikre og korrekt isolerede.

5.2 Montering

The i-R Receive is designed for flush-mounted installation behind a switch or in a junction box. Ensure adequate space for ventilation and wiring.

5.3 Placering af antenne

The integrated antenna should be positioned freely and not be coiled or placed near large metal objects, which could interfere with signal reception.

6. Betjeningsvejledning

6.1 Parring med en sender

To control the i-R Receive, it must first be paired with a compatible Selve radio transmitter (e.g., Selve i-R Transmit). The programming button is located on the back of the unit (see Figure 3.2 and 3.5).

1. Ensure the i-R Receive is powered on.
2. Press the programming button on the i-R Receive briefly (approx. 1 second). The connected device may briefly react (e.g., a short movement of a roller shutter) to indicate it is in pairing mode.
3. Within approximately 10 seconds, press the desired "UP" or "DOWN" button on your Selve radio transmitter.
4. The connected device should react again, confirming successful pairing.
5. Repeat for additional transmitters if desired.

6.2 Grundlæggende betjening

Once paired, the i-R Receive will respond to commands from the linked Selve radio transmitter:

• Pressing the "UP" button on the transmitter will activate the 'Up' output.
• Pressing the "DOWN" button on the transmitter will activate the 'Down' output.
• A "STOP" or middle button (if available on the transmitter) will halt the current movement.

7. Vedligeholdelse

The Selve i-R Receive is designed for maintenance-free operation. No regular maintenance is required.

• Rensning: If necessary, gently wipe the exterior with a dry, soft cloth. Do not use liquid cleaners or solvents.
• Inspektion: Periodically check wiring connections for looseness or damage. Ensure the device is not exposed to excessive heat or moisture.

Do not attempt to open or repair the device. Refer to qualified personnel for any issues beyond basic operation.

8. Fejlfinding

9. Garanti og support

Selve products are manufactured to high quality standards. For warranty information, please refer to the terms and conditions provided at the point of purchase or visit the official Selve webwebsted.

For technical support or service inquiries, please contact your authorized Selve dealer or the Selve customer service department. When contacting support, please have your product model (i-R Receive, 29 87 71) and ASIN (B007E5L328) ready.

Selve GmbH & Co. KG
Werdohler Landstraße 286
58513 Lüdenscheid
Tyskland

Note: Contact details are for informational purposes and may vary. Please refer to the official Selve webhjemmeside for de seneste kontaktoplysninger.

10. Bortskaffelse

Do not dispose of electrical devices with household waste. In accordance with the European Directive on Waste Electrical and Electronic Equipment (WEEE), electrical and electronic equipment must be collected separately and recycled in an environmentally sound manner. Contact your local authorities for information regarding proper disposal and recycling facilities.