Indledning
Thank you for choosing the AMS 5132/1 Radio-Controlled Pendulum Wall Clock. This clock combines classic design with modern radio-controlled technology for precise timekeeping. Crafted from walnut lacquered solid wood, it is designed for indoor use. Please read this manual carefully before setup and operation to ensure proper function and longevity of your clock.

Billede: Forside view of the AMS 5132/1 Radio-Controlled Pendulum Wall Clock, showcasing its round dial, analog display, and walnut wood finish.
Sikkerhedsoplysninger
- Opbevar batterier utilgængeligt for børn.
- Udsæt ikke uret for ekstreme temperaturer, direkte sollys eller høj luftfugtighed.
- Avoid using abrasive cleaners on the wood or clock face.
- Sørg for, at uret er sikkert monteret for at forhindre det i at falde ned.
- Bortskaf brugte batterier ansvarligt i henhold til lokale regler.
Pakkens indhold
Tjek venligst pakken for følgende varer:
- AMS 5132/1 Radio-Controlled Pendulum Wall Clock
- Pendulum rod and bob
- Instruktionsmanual (dette dokument)
Bemærk: Batterier er ikke inkluderet og skal købes separat.
Opsætning
- Udpakning: Carefully remove the clock and all components from the packaging. Retain packaging for future transport or storage.
- Batteri installation:
- Find batterirummet på bagsiden af urmekanismen.
- Isæt de nødvendige batterier (typisk 1x AA, medfølger ikke) i henhold til polaritetsmarkeringerne (+/-).
- Luk batterirummets dæksel.
- Pendulinstallation:
- Carefully attach the pendulum rod to the hook or slot provided on the clock mechanism, usually located below the movement.
- Ensure the pendulum hangs freely and does not touch the clock casing.
- Indledende tidssynkronisering (radiostyring):
- Once batteries are installed, the clock hands will automatically move to the 12 o'clock position and begin searching for the radio signal. This process can take several minutes to an hour.
- Place the clock in an area with good reception, away from electronic devices that may cause interference.
- The clock will automatically set itself to the correct time once the signal is received.

Image: Detail of a clock face indicating the 'RADIO CONTROLLED' feature, essential for automatic time synchronization.
- Montering af uret:
- Select a suitable wall location for mounting. Ensure the wall can support the weight of the clock.
- Use appropriate wall anchors and screws (not included) for secure installation.
- Hang the clock securely on the wall.
Drift
- Automatisk tidssynkronisering: The clock automatically receives a radio signal to ensure accurate timekeeping, including adjustments for Daylight Saving Time. This typically occurs once a day, usually in the early morning hours.
- Pendulbevægelse: Gently push the pendulum to start its swing. It should continue to swing rhythmically as long as the clock is powered and functioning correctly.
- Manual Time Adjustment (if necessary): In rare cases where the radio signal is consistently weak or unavailable, some models may offer a manual adjustment button (often labeled 'SET' or 'M.SET') on the back. Refer to specific markings on your clock's mechanism. Pressing this button usually advances the minute hand. Hold to move hands quickly. Release when close to the desired time and press repeatedly for fine adjustments. The clock will attempt to resynchronize with the radio signal after manual adjustment.
Opretholdelse
- Rensning: Wipe the wood casing with a soft, dry cloth. For the clock face, use a clean, lint-free cloth. Do not use harsh chemicals or abrasive materials.
- Udskiftning af batteri: Replace batteries annually or when the clock hands stop moving or the pendulum stops swinging. Always replace all batteries at the same time with new ones of the same type.
- Generel pleje: Avoid placing the clock in areas with extreme temperature fluctuations or high humidity, as this can affect the wood and the clock mechanism.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Uret kører ikke | Døde eller forkert isat batterier | Udskift batterierne, og sørg for korrekt polaritet. |
| Forkert tid vist | Dårlig radiosignalmodtagelse | Move the clock to a different location, away from electronic interference. Allow time for re-synchronization. |
| Pendulet svinger ikke | Pendulum not properly installed or obstructed | Ensure the pendulum is correctly hooked and swings freely without touching the casing. Gently push to start. |
| Clock loses time or gains time | Weak radio signal or battery issue | Check battery strength. Relocate the clock for better signal reception. |
Specifikationer
- Mærke: AMS
- Modelnummer: 5132/1
- Farve: Valnød
- Materiale: Træ
- Skærmtype: Analog
- Stil: Klassisk
- Form: Rund
- Anvendelse: Indendørs
- Rammemateriale: Træ
- Batterier inkluderet: Ingen
- Monteringstype: Vægmontering
Garanti og support
For warranty information and customer support, please refer to the documentation provided at the time of purchase or contact your retailer. You may also visit the official AMS webwebsted for yderligere hjælp.