Horizon MH-338 Digital Precision Scale User Manual

Produkt overview

The Horizon MH-338 is a compact digital precision scale designed for accurate measurements up to 200 grams with a 0.01 gram increment. Its design resembles a computer mouse, offering a discreet and portable solution for various weighing needs.

Nøglefunktioner:

• 200g Capacity with 0.01g Reading Increment
• High Accuracy and Reliability
• Multiple Weighing Modes (g, oz, ct, gn)
• Tare Function for Net Weight Measurement
• Automatisk sluk-funktion

Opsætning

1. Udpakning og inspektion

Carefully remove all components from the packaging. Inspect the scale for any signs of damage. The package should include the MH-338 scale, two AAA batteries, and this user manual.

Image: Contents of the Horizon MH-338 scale package, including the scale, batteries, and user manual.

2. Batteriinstallation

1. Find batterirummet på undersiden af ​​vægten.
2. Skub batterirummets dæksel åbent.
3. Isæt to AAA-batterier, og sørg for at polariteten (+/-) vender korrekt.
4. Luk batterirummets dæksel forsvarligt.

Image: The underside of the Horizon MH-338 scale, illustrating the battery compartment for AAA battery installation.

3. Placering

Place the scale on a flat, stable, and vibration-free surface to ensure accurate readings. Avoid placing it near strong electromagnetic fields or extreme temperature changes.

Operation

1. Tænd/sluk

• For at tænde vægten skal du trykke på [ON/OFF] button. The LCD display will illuminate and show "0.00g".
• For at slukke vægten skal du trykke på og holde [ON/OFF] button for a few seconds until the display turns off. The scale also features an automatic power-off function after 90 seconds of inactivity to conserve battery life.

Billede: En detaljeret view of the Horizon MH-338 scale's LCD display and the 'M' (Mode) and 'ON/OFF/T' (Tare/Power) buttons.

2. Valg af enhed

Tryk på [M] (Mode) button to cycle through the available weighing units: grams (g), ounces (oz), carats (ct), and grains (gn). Select the desired unit before weighing.

3. Tarafunktion

Tarafunktionen giver dig mulighed for at trække vægten af ​​en beholder fra, så du kun måler indholdets nettovægt.

1. Placer en tom beholder på vejeplatformen.
2. Vent på, at displayet stabiliserer sig, og tryk derefter på [ON/OFF/T] knappen. Displayet nulstilles til "0.00g" (eller den valgte enhed).
3. Læg de varer, der skal vejes, i beholderen. Displayet viser varernes nettovægt.

4. Vejningsprocedure

1. Ensure the scale is on and displaying "0.00g" (or the selected unit).
2. Gently place the item(s) to be weighed onto the center of the stainless steel weighing platform.
3. Wait for the display to stabilize. The stable weight will be shown on the LCD.

Image: The Horizon MH-338 scale in use, demonstrating the weighing of fine powder in its lid and loose tea leaves on the platform.

Kalibrering

For optimal accuracy, periodic calibration may be required. Refer to the following general steps for calibration. A 200g calibration weight is typically used for this model.

1. Turn the scale ON and wait for it to display "0.00g".
2. Tryk og hold på [M] (Mode) button until "CAL" appears on the display, then release.
3. Tryk på [M] knappen igen. Displayet vil blinke med den nødvendige kalibreringsvægt (f.eks. "200.00 g").
4. Placer den nøjagtige kalibreringsvægt (f.eks. 200 g) på midten af ​​vejeplatformen.
5. The display will show "PASS" and then return to normal weighing mode, indicating successful calibration. Remove the weight.

Image: The Horizon MH-338 scale displaying "5.00g" with a small calibration weight placed on its stainless steel platform.

Opretholdelse

1. Rensning

Tør vægten af ​​med en let damp klud. Brug ikke slibende rengøringsmidler, og nedsænk ikke vægten i vand. Hold vejeplatformen ren og fri for snavs.

2. Opbevaring

Store the scale in a clean, dry environment at room temperature. Avoid extreme temperatures, humidity, and direct sunlight. If storing for extended periods, remove the batteries to prevent leakage.

3. Udskiftning af batteri

When the display shows a low battery indicator (e.g., "Lo"), replace both AAA batteries with new ones to ensure continued accurate operation.

Fejlfinding

• "Lo" eller indikator for lavt batteri: Udskift batterierne med nye AAA-batterier.
• "OUE2" or "EEEE": Indicates overload. Remove the item from the platform immediately to prevent damage. The maximum capacity is 200g.
• Upræcise læsninger:
  • Sørg for, at vægten er på en flad, stabil overflade.
  • Check for any obstructions under or around the platform.
  • Recalibrate the scale if necessary.
  • Ensure the ambient temperature is stable.
• Skalaen tænder ikke: Kontroller batteriinstallationen, og sørg for, at batterierne er nye og korrekt isat.

Specifikationer

Garanti og support

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Horizon webwebstedet. Behold din købskvittering som købsbevis.