MEAN WELL RS-100-48 AC-DC Power Supply User Manual

1. Introduktion

This manual provides essential instructions for the safe and efficient operation of your MEAN WELL RS-100-48 AC-DC Power Supply. The RS-100-48 is a 100W single output switching power supply designed to convert AC input to a stable 48V DC output at 2.3 Amps, delivering 110.4W of power. Please read this manual thoroughly before installation and use.

2. Sikkerhedsinstruktioner

ADVARSEL: Improper installation or operation can lead to electric shock, fire, or damage to the unit. Always follow these safety guidelines:

• Ensure the power supply is disconnected from the AC mains before any installation or wiring.
• Kun kvalificeret personale bør udføre installation og vedligeholdelse.
• Bekræft input voltage compatibility (88-264VAC) before connecting.
• Do not operate the unit in environments with excessive moisture, dust, or extreme temperatures outside its specified range.
• Sørg for korrekt jording.
• Åbn ikke strømforsyningen casing; der er ingen dele indeni, som kan serviceres af brugeren.
• Sørg for tilstrækkelig ventilation omkring enheden for at forhindre overophedning.

3. Opsætning og installation

3.1 Fysisk installation

The RS-100-48 is an enclosed type power supply. Mount the unit in a location that allows for sufficient airflow for cooling by free air convection. Avoid obstructing the ventilation holes. The unit dimensions are approximately 6.26 x 3.82 x 1.5 inches (L x W x H).

3.2 Ledningsforbindelser

Connections are made via screw terminal blocks. Refer to the diagram below for proper wiring.

Figur 1: MEAN WELL RS-100-48 Power Supply showing AC input (L, N, Ground) and DC output (+V, -V) terminal blocks, along with the +V ADJ potentiometer and power indicator LED.

• AC-indgang: Connect the AC Line (L), Neutral (N), and Ground (⏚) wires to the corresponding terminals on the input side. The input voltage-området er 88-264VAC.
• DC-udgang: Connect your load to the DC output terminals. The positive output (+V) and negative output (-V) terminals are clearly marked. The unit provides a 48V DC output.

3.3 Udgang Voltage Justering

Output voltage can be finely adjusted using the "+V ADJ" potentiometer located near the output terminals. Use a small screwdriver to carefully turn the potentiometer clockwise to increase the voltage or counter-clockwise to decrease it within the specified adjustment range.

4. Betjening

Once all connections are securely made and verified, apply AC power to the input terminals. The power supply will begin operation, providing a stable 48V DC output.

4.1 LED-indikator

A green LED indicator is present on the unit. This LED illuminates when the power supply is receiving AC input and producing a stable DC output, indicating normal operation.

4.2 Køling

The RS-100-48 is cooled by free air convection. Ensure that the perforated metal casing is not blocked and that there is adequate space around the unit for air circulation. The operating temperature range is -25°C to 70°C.

5. Vedligeholdelse

The MEAN WELL RS-100-48 power supply is designed for long-term reliability and requires minimal maintenance.

• Rensning: Periodically inspect the unit for dust accumulation on the casing. If necessary, gently clean the exterior with a soft, dry cloth. Ensure the power supply is disconnected from all power sources before cleaning.
• Inspektion: Kontrollér regelmæssigt ledningsforbindelserne for tæthed og tegn på slid eller beskadigelse.
• Do not attempt to open the unit for internal cleaning or repair.

6. Fejlfinding

If the power supply is not functioning as expected, consider the following:

• No Output Power / LED Off:
  • Kontroller, at AC-indgangen voltage is present and within the 88-264VAC range.
  • Kontroller alle ledningsforbindelser for korrekt kontakt og sikkerhed.
  • Ensure no short circuits are present on the output terminals.
• Udgang Voltage Forkert:
  • Check the "+V ADJ" potentiometer setting. Adjust if necessary.
  • Ensure the load is not exceeding the maximum output current of 2.3 Amps or 110.4W.
• Enheden lukker ned:
  • The power supply includes built-in protections for short circuit, overload, and over voltage. If a fault condition occurs, the unit may shut down to protect itself and the connected load. Remove the fault condition and cycle the AC power to reset the unit.
  • Check for adequate ventilation; overheating can trigger thermal protection.

If issues persist after following these steps, contact MEAN WELL technical support.

7. Specifikationer

8. Garantioplysninger

The MEAN WELL RS-100-48 AC-DC Power Supply comes with a 3-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by improper installation, misuse, unauthorized modifications, or external factors.

For warranty claims or service, please retain your proof of purchase and contact your vendor or MEAN WELL customer support.

9. Support

For technical assistance, product inquiries, or further support, please visit the official MEAN WELL website or contact their customer service department. Always provide the model number (RS-100-48) when seeking support.