EGLO 89065A

EGLO 89065A Rebell One-Light Ceiling/Wall Mount Fixture

Brugervejledning

Indledning

Tak for købetasing the EGLO 89065A Rebell One-Light Ceiling/Wall Mount Fixture. This manual provides essential information for the safe installation, operation, and maintenance of your new light fixture. Please read these instructions thoroughly before beginning installation and retain them for future reference.

EGLO 89065A Rebell One-Light Ceiling/Wall Mount Fixture with brushed aluminum finish and glitter foil shade

Image: The EGLO 89065A Rebell light fixture, showcasing its brushed aluminum finish and glitter foil shade, designed for ceiling or wall mounting.

Sikkerhedsinstruktioner

  • ADVARSEL: Always turn off the power supply at the main circuit breaker before beginning installation, maintenance, or bulb replacement.
  • Dette produkt skal installeres i overensstemmelse med den gældende installationskode af en person, der er bekendt med produktets konstruktion og drift og de involverede farer.
  • Brug kun den specificerede pæretype og wattage. Exceeding the maximum wattage kan forårsage overophedning og beskadigelse af armaturet.
  • Tilslut ikke denne armatur til et ujordet elektrisk system.
  • Sørg for, at alle elektriske forbindelser er sikre og overholder lokale el-forskrifter.
  • Do not handle the fixture or power cord with wet hands.
  • Hold brandfarlige materialer væk fra lysarmaturet.

Pakkens indhold

Verify that all components are present before discarding packaging materials:

  • Light Fixture Assembly (Brushed Aluminum Finish with Glitter Foil Shade)
  • Monteringsudstyr (skruer, trådmøtrikker)
  • Instruktionsmanual

Note: One (1) 60W A19 bulb is required and not included in the package.

Opsætning og installation

This fixture can be mounted on either a ceiling or a wall. Follow these steps carefully:

  1. Forbered til installation:
    • Sluk for strømmen ved hovedafbryderen.
    • Sørg for, at monteringsfladen er ren, tør og strukturelt sund.
    • Gather necessary tools (screwdriver, wire strippers, electrical tape, safety glasses).
  2. Fastgør monteringsbeslag:
    • Secure the mounting bracket to the electrical junction box using the provided screws. Ensure it is firmly attached.
  3. Foretag elektriske forbindelser:
    • Connect the fixture's white wire to the supply's white (neutral) wire.
    • Connect the fixture's black wire to the supply's black (live) wire.
    • Connect the fixture's ground wire (bare copper or green) to the supply's ground wire and the mounting bracket.
    • Fastgør alle forbindelser med trådmøtrikker og pak dem ind med elektrikertape for ekstra sikkerhed.
  4. Monter armaturet:
    • Carefully align the fixture with the mounting bracket and secure it using the provided screws.
    • Ensure the fixture is flush against the mounting surface.
  5. Installer pære:
    • Insert one (1) 60W A19 bulb (not included) into the socket. Do not overtighten.
  6. Gendan strøm:
    • Tænd for strømmen igen ved hovedafbryderen.
    • Test lysarmaturet.

Betjeningsvejledning

The EGLO 89065A Rebell fixture operates via a standard wall switch or compatible push-button controller connected to your home's electrical system.

  • Tænd/sluk: Brug vægkontakten, der er tilsluttet armaturet, til at tænde eller slukke lyset.
  • Udskiftning af pære: Ensure power is off at the circuit breaker before replacing the bulb. Allow the bulb to cool completely before touching. Unscrew the old bulb and screw in a new 60W A19 bulb.

Opretholdelse

Proper care will ensure the longevity and appearance of your light fixture.

  • Rensning: Turn off the power and allow the fixture to cool. Wipe the brushed aluminum finish and glitter foil shade with a soft, dry, or slightly damp klud. Brug ikke slibende rengøringsmidler, opløsningsmidler eller polermidler, da de kan beskadige overfladen.
  • Pære type: Use only one (1) 60W A19 incandescent bulb or an equivalent LED/CFL bulb.
  • Inspektion: Kontrollér regelmæssigt alle elektriske forbindelser og monteringsbeslag for tæthed.

Fejlfinding

Problem Mulig årsag Løsning
Lyset tændes ikke.
  • Ingen strøm til armaturet.
  • Pæren er defekt eller løs.
  • Forkert ledningsføring.
  • Kontroller afbryderen og vægafbryderen.
  • Skift pæren, eller spænd den.
  • Verify wiring connections (consult a qualified electrician if unsure).
Lyse flimrer.
  • Løs pære.
  • Løs ledningsforbindelse.
  • Inkompatibel lysdæmper (hvis relevant).
  • Spænd pæren.
  • Kontroller og fastgør ledningsforbindelserne.
  • Sørg for, at lysdæmperen er kompatibel med pæretypen.
Armaturet brummer.
  • Incompatible bulb or dimmer.
  • Replace bulb with a compatible type or remove dimmer.

If you experience issues not listed here or if troubleshooting steps do not resolve the problem, please contact customer support.

Specifikationer

  • Model: 89065A Rebell
  • Mærke: Eglo
  • Dimensioner: 9 7/8" wide, 8 3/8" tall (approximate)
  • Materiale: Aluminum (Brushed Finish), Crystal (Shade)
  • Lyskilde: 1 x A19 bulb (not included)
  • Max Wattage: 60W
  • Monteringstype: Loftmontering, Vægmontering
  • Strømkilde: Elektrisk med ledning

Garanti og support

Specific warranty information for the EGLO 89065A Rebell fixture is not provided in this document. Please refer to the original product packaging or the manufacturer's official webhjemmeside for detaljerede garantivilkår.

For technical support, replacement parts, or further assistance, please contact EGLO customer service through their official webwebstedet eller forhandleren, hvor produktet blev købt.

EGLO Officiel Webwebsted: Besøg EGLO-butikken på Amazon

© 2023 EGLO. Alle rettigheder forbeholdes. Oplysningerne i denne manual kan ændres uden varsel.