VTech ATT-CL80100 Accessory Handset User Manual

1. Introduktion

This manual provides instructions for the VTech ATT-CL80100 DECT 6.0 accessory handset. This handset is designed to expand your existing compatible VTech/ATT DECT 6.0 cordless phone system. It is compatible with ATT models CL81100, CL81200, CL81300, CL82100, CL82200, CL82300, CL82350, CL82400, CL82500, CL82600, CL84100, and CL84200. Please read this manual thoroughly before using your new accessory handset.

Image 1.1: The VTech ATT-CL80100 accessory handset. This image shows the front view of the cordless handset, typically including the display, keypad, and speaker.

2. Opsætning

Before using your new accessory handset, it must be registered to your existing compatible base unit and its battery must be charged.

2.1 Pakkens indhold

Sørg for, at din pakke indeholder følgende varer:

• ATT-CL80100 Accessory Handset
• Handset Battery Pack
• Handset Charger with Power Adapter
• Brugermanual (dette dokument)

2.2 Batteriinstallation

1. Åbn batterirummets dæksel på bagsiden af ​​håndsættet.
2. Tilslut batteripakkens stik sikkert til stikket inde i batterirummet.
3. Placer batteripakken i rummet.
4. Skub batteridækslet tilbage på plads, indtil det klikker.

2.3 Opladning af håndsættet

1. Plug the small end of the charger's power adapter into the back of the handset charger.
2. Sæt den store ende af strømadapteren i en almindelig stikkontakt.
3. Place the handset face forward into the charger cradle. The charge indicator light on the handset should illuminate, indicating proper charging.
4. Allow the handset to charge for at least 12 hours before initial use. A full charge ensures optimal battery performance.

2.4 Registering the Handset

This accessory handset must be registered to your existing base unit to function. Refer to your main system's user manual for specific registration instructions, as procedures may vary slightly between base models (CL81xxx, CL82xxx, CL84xxx series). Generally, the process involves:

• Placing the accessory handset in its charger.
• Initiating a registration sequence on the base unit (often by pressing and holding a "PAGE" or "HANDSET LOCATOR" button).
• Confirming registration on the accessory handset.

If registration is successful, the handset display will show "Registered" or a similar confirmation message.

3. Betjening af håndsættet

Once registered and charged, your accessory handset operates similarly to your primary handsets.

3.1 Foretage og modtage opkald

• Sådan foretager du et opkald: Trykke TALK / FLASH or HØJTTALER, og ring derefter op til telefonnummeret.
• For at besvare et opkald: Press any key (Any Key Answer feature) or press TALK / FLASH or HØJTTALER.
• Sådan afslutter du et opkald: Trykke FRA/RYD eller sæt håndsættet tilbage i opladeren.

3.2 Using the Directory

The handset shares the main system's 50-name/number directory. To access:

1. Trykke MENU/VÆLG.
2. Scroll to "Directory" and press MENU/VÆLG.
3. Scroll through entries or use the keypad to search by name.
4. Trykke TALK / FLASH to dial a selected entry.

3.3 Genopkald

The handset stores the last 20 numbers dialed. To redial:

1. Trykke GENOPKALD/PAUSE.
2. Scroll through the list of recent calls.
3. Trykke TALK / FLASH for at ringe til det valgte nummer.

3.4 Handset Settings

You can customize various settings on your handset, including selectable ringer tones and menu language (English/Spanish/French setup menu). Access these options via the MENU/VÆLG button and navigate to the "Settings" or "Handset Setup" menu.

4. Vedligeholdelse

Proper care ensures the longevity of your accessory handset.

• Rensning: Wipe the handset and charger with a soft, damp klud. Brug ikke rengøringsspray eller skrappe kemikalier.
• Batteripleje: Replace the battery pack when its performance significantly degrades. Use only the specified replacement battery.
• Miljø: Keep the handset away from excessive heat, direct sunlight, and moisture.

5. Fejlfinding

If you experience issues with your accessory handset, try the following solutions:

5.1 No Dial Tone or Cannot Make/Receive Calls

• Sørg for, at håndsættet er korrekt registreret til baseenheden.
• Check that the handset battery is charged.
• Verify the main base unit is powered on and connected to the telephone line.

5.2 Handset Display is Blank or Not Working

• Place the handset in its charger to ensure it is charging.
• Check the battery connection inside the handset.
• Hvis problemet fortsætter, skal batteriet muligvis udskiftes.

5.3 Dårlig lydkvalitet

• Flyt tættere på baseenheden for at forbedre signalstyrken.
• Sørg for, at der ikke er store metalgenstande eller andre elektroniske enheder, der forstyrrer signalet.
• Check for any physical damage to the handset or base unit.

5.4 Handset Not Registering

• Ensure you are following the registration steps outlined in your main system's user manual.
• Try resetting the base unit by unplugging its power for a few minutes, then plugging it back in.
• Ensure the accessory handset is within range of the base unit during registration.

6. Specifikationer

7. Garantioplysninger

VTech products are manufactured with high-quality components and are designed to provide years of trouble-free operation. For specific warranty details, including duration and coverage, please refer to the warranty card included with your original base unit purchase or visit the official VTech support webwebstedet. Behold din købskvittering som købsbevis.

8. Kundesupport

For technical assistance, product registration, or to order replacement parts, please contact VTech customer support. You can typically find contact information (phone numbers, website, email) on the VTech official website or in the documentation provided with your main phone system.

Online ressourcer kan omfatte:

• Ofte stillede spørgsmål (ofte stillede spørgsmål)
• Product Support Documents
• Software/Firmware Updates (if applicable)

When contacting support, please have your product model number (ATT-CL80100) and purchase date available.