Z-Lite 1176PHM-BG-PM

Z-Lite 1176PHM-BG-PM Devonshire Outdoor Post Light Instruction Manual

Model: 1176PHM-BG-PM

1. Introduktion

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Z-Lite 1176PHM-BG-PM Devonshire Outdoor Post Light. Please read all instructions carefully before beginning installation and retain this manual for future reference.

The Z-Lite 1176PHM-BG-PM is an outdoor post light designed for exterior illumination. It features a cast aluminum frame with a Black Gold finish and a clear ribbed optic glass shade.

2. Sikkerhedsoplysninger

ADVARSEL: Risiko for elektrisk stød. Afbryd strømmen ved sikringsboksen eller afbryderen før installation eller service.

Always consult a qualified electrician if you are unsure about the installation process. Follow all local electrical codes and ordinances.

  • Sørg for, at strømforsyningen er afbrudt, før du håndterer armaturet.
  • Brug kun den specificerede pæretype og wattage. Refer to the 'Specifications' section for details.
  • Do not install this fixture on a wet surface or near standing water.
  • Håndter glaskomponenter forsigtigt for at forhindre brud.
  • Sørg for, at alle forbindelser er sikre og korrekt isolerede.

3. Pakkens indhold

Kontroller, at alle komponenter er til stede og ubeskadigede, før du fortsætter installationen. Hvis der mangler eller er beskadigede dele, må du ikke forsøge at installere armaturet. Kontakt kundesupport for at få hjælp.

  • Outdoor Post Light Fixture (1)
  • Glasskærm (1)
  • Monteringshardwaresæt (1)
  • Instruktionsmanual (1)

4. Opsætning

4.1 Nødvendigt værktøj

  • Phillips hovedskruetrækker
  • Trådstrippere
  • Elektrisk tape
  • Justerbar skruenøgle
  • Sikkerhedsbriller

4.2 Installationstrin

  1. Sluk for strømmen: Locate the circuit breaker or fuse box controlling the power to the installation location and turn off the power. Verify power is off using a voltage tester.
  2. Prepare Post: Ensure the existing post or mounting surface is stable, level, and properly wired according to local electrical codes.
  3. Monter armaturbase: Attach the fixture base to the post using the provided mounting hardware. Ensure it is securely fastened and stable.
  4. Ledningsforbindelser: Carefully connect the electrical wires. Connect the black (hot) wire from the fixture to the black (hot) wire from the power supply. Connect the white (neutral) wire from the fixture to the white (neutral) wire from the power supply. Connect the green or bare copper (ground) wire from the fixture to the green or bare copper (ground) wire from the power supply. Secure all connections with wire nuts and electrical tape.
  5. Installer glasskærm: Carefully place the clear ribbed optic glass shade onto the fixture. Secure it according to the fixture's design, typically with retaining clips or screws.
  6. Installer pære: Indsæt det passende wattage and type of bulb (refer to specifications) into the socket. Do not overtighten.
  7. Gendan strøm: Når installationen er færdig, og alle forbindelser er sikre, skal strømmen genoprettes ved afbryderen eller sikringsskabet.
  8. Testopstilling: Tænd lyskontakten for at sikre, at armaturet fungerer korrekt.
Z-Lite 1176PHM-BG-PM Devonshire Outdoor Post Light

Figure 1: Z-Lite 1176PHM-BG-PM Devonshire Outdoor Post Light. This image shows the assembled outdoor post light with its black gold finish and clear ribbed optic glass shade.

5. Betjeningsvejledning

The Z-Lite 1176PHM-BG-PM Outdoor Post Light is designed for simple operation. Once properly installed and powered, it can be controlled by a standard wall switch or an external timer/photocell system connected to its power supply.

  • Tænd/sluk: Brug den tilsluttede vægkontakt til at tænde eller slukke lysarmaturet.
  • Udskiftning af pære: To replace the bulb, ensure power is off at the circuit breaker. Carefully remove the glass shade, unscrew the old bulb, and screw in a new bulb of the correct type and wattage. Reattach the glass shade securely.

6. Vedligeholdelse

Regular maintenance will help ensure the longevity and optimal performance of your outdoor post light.

  • Rensning: Rengør armaturet regelmæssigt med en blød kludamp klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler, da disse kan beskadige overfladen eller glasset. Sørg for, at strømmen er slukket, før rengøring.
  • Glasskærm: The clear ribbed optic glass shade can be cleaned with a mild glass cleaner.
  • Inspektion: Periodically inspect the wiring and connections for any signs of wear, fraying, or corrosion. Ensure all mounting hardware remains tight.
  • Udskiftning af pære: Replace bulbs as needed. Always ensure the replacement bulb matches the specified type and wattage.

7. Fejlfinding

Se tabellen nedenfor for almindelige problemer og deres mulige løsninger.

ProblemMulig årsagLøsning
Lyset tændes ikke.Ingen strøm til armaturet.Kontroller afbryderen eller sikringen. Sørg for, at vægkontakten er tændt.
Løse ledningsforbindelser.Sluk for strømmen og kontroller alle ledningsforbindelser.
Defekt pære.Replace bulb with a new one of the correct type and wattage.
Lyse flimrer.Løs pære eller ledninger.Turn off power. Tighten bulb. Check wire connections.
Forkert pæretype.Ensure the bulb is compatible with the fixture.
Glasskærmen er løs.Retaining clips/screws not tightened.Turn off power. Securely fasten the glass shade retaining clips or screws.

8. Specifikationer

FeatureDetalje
MærkeZ-Lite
Modelnummer1176PHM-BG-PM
Produktdimensioner12.5 x 9 x 25 tommer (L x B x H)
Varens vægt8 pund
MaterialeAluminum Frame, Glass Shade
Finish TypeSort guld
SkærmmaterialeClear Ribbed Optic Glass
Wattage60 watt (maks.)
Pære baseKandelaber (E12)
StrømkildeElektrisk med ledning
Batterier påkrævetIngen
UPC685659002669

9. Garanti og support

For specific warranty information regarding your Z-Lite 1176PHM-BG-PM Devonshire Outdoor Post Light, please refer to the warranty card included with your purchase or visit the official Z-Lite webwebsted.

If you encounter any issues or require technical assistance, please contact Z-Lite customer support. Contact details can typically be found on the product packaging or the manufacturer's webwebsted.