BG Electrical 850-01 Switched Fused Connection Unit

Produkt overview

The BG Electrical 850-01 is a 13 Amp switched fused connection unit, featuring a sleek white moulded design. It is part of the Nexus Moulded range, engineered for reliability and modern aesthetics. This unit is ideal for isolating power to hardwired appliances such as cookers, extractor fans, and other fixed electrical equipment, ensuring safety and convenience.

Nøglefunktioner omfatter:

• Sleek and slim design with softly rounded corners.
• Conveniently angled in-line colour-coded captive screw terminals for easy installation.
• Clean and modern appearance with screw covers for a seamless finish.
• Integrated fuse spur switch to prevent electrical overload.

Front view of the BG Electrical Switched Fused Connection Unit, showcasing its clean white moulded finish and integrated switch and fuse holder.

Opsætning og installation

WARNING: Installation must be carried out by a qualified electrician and in accordance with current wiring regulations. Always isolate the mains power supply before commencing any electrical work.

Før du begynder

Sørg for at du har følgende værktøjer og materialer:

• Skruetrækkersæt (fladt hoved og Phillips)
• Afisoleringstænger
• Voltage tester
• Appropriate electrical cable (e.g., 2.5mm² twin and earth)
• 35mm deep back box (if not already installed)

Ledningsinstruktioner

1. Ensure the mains power supply is OFF at the consumer unit/fuse box. Verify with a voltage tester.
2. Carefully remove the existing accessory (if applicable) and prepare the cables.
3. Strip approximately 12-15mm of insulation from the ends of the Live (Brown), Neutral (Blue), and Earth (Green/Yellow) conductors.
4. Connect the incoming mains supply cables to the corresponding terminals on the unit:
   • Live (Brown) to the 'IN L' terminal.
   • Neutral (Blue) to the 'IN N' terminal.
   • Earth (Green/Yellow) to the 'E' (Earth) terminal.
5. Connect the appliance cables to the corresponding terminals:
   • Appliance Live (Brown) to the 'LOAD L' terminal.
   • Appliance Neutral (Blue) to the 'LOAD N' terminal.
   • Appliance Earth (Green/Yellow) to the 'E' (Earth) terminal.
6. Ensure all terminal screws are tightened securely, checking for any loose strands.

Nærbillede view of the rear of the unit, showing the clearly colour-coded terminals with retained screws, illustrating how wires are slotted into place for hardwired appliances.

Montering af enheden

1. Gently push the wired unit back into the 35mm deep back box, ensuring no wires are pinched.
2. Secure the unit to the back box using the provided mounting screws.

Side view of the unit demonstrating its modern rounded profile and how it fits into a standard 35mm back box, ideal for retrofitting.

Afsluttende forsamling

1. Attach the front plate to the unit.
2. Place the screw covers over the mounting screws for a clean and modern finish.
3. Restore power at the consumer unit/fuse box.

Image showing the sleek white moulded front plate of the unit, highlighting its hardwearing and scratch-resistant surface, along with the screw caps for a clean finish.

Operation

The BG Electrical Switched Fused Connection Unit features a simple on/off switch and an accessible fuse holder.

• Tænd/sluk: To supply power to the connected appliance, press the rocker switch to the 'ON' position. To cut power, press the switch to the 'OFF' position.
• Fuse Function: The integrated fuse protects the connected appliance and circuit from overcurrent. If an overload or short circuit occurs, the fuse will blow, interrupting the power supply to prevent damage.

The unit installed in a kitchen setting, emphasizing the fuse spur switch designed to prevent electrical overload. The word 'FUSE' is embossed on the front.

Vedligeholdelse og pleje

The BG Electrical Switched Fused Connection Unit requires minimal maintenance.

• Rensning: To clean the unit, wipe the surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as this may damage the finish or internal components.
• Udskiftning af sikring: If the connected appliance stops receiving power, the fuse may have blown. To replace the fuse:
  • Ensure the mains power supply to the unit is OFF.
  • Carefully open the fuse holder compartment (usually by pressing a small tab or lever).
  • Remove the blown fuse and replace it with a new fuse of the correct rating (e.g., 13 Amp).
  • Close the fuse holder compartment securely.
  • Restore power and test the unit. If the new fuse blows immediately, there may be a fault with the appliance or wiring, and a qualified electrician should be consulted.

Fejlfinding

Tekniske specifikationer

Garanti og support

BG Electrical, part of Luceco PLC, guarantees this product against faulty materials and workmanship for a period of 30 år from the date of purchase. This warranty covers defects arising from normal use and does not cover damage caused by improper installation, misuse, or unauthorized modifications.

For technical support, warranty claims, or further assistance, please refer to the contact information provided on the product packaging or visit the official British General webwebsted.