Instruktionsmanual

1. Introduktion

This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your BG Electrical Single Weatherproof Outdoor Switched Power Socket, Model WP21-01. Designed for outdoor use, this robust power socket offers a reliable and safe electricity supply in various weather conditions. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.

2. Sikkerhedsoplysninger

Vigtig: Electrical installations should only be carried out by a qualified electrician in accordance with current wiring regulations. Failure to comply with these instructions could result in electric shock, fire, or serious injury.

• Afbryd altid strømforsyningen, inden der påbegyndes elektrisk arbejde.
• Sørg for, at produktet er korrekt jordforbundet.
• Overskrid ikke den nominelle voltage (250V AC) or wattage (3250W).
• The product has an IP66 rating, indicating protection against dust ingress and powerful water jets. However, ensure all cable entries and covers are properly sealed after installation to maintain this rating.
• Regularly inspect the socket for any signs of damage or wear.
• Hold børn væk fra elektriske installationer.

3. Pakkens indhold

Kontroller, at alle komponenter er til stede, før installationen påbegyndes:

• 1 x BG Electrical Single Weatherproof Outdoor Switched Power Socket (Model WP21-01)
• 2 x Rubber Wall Fixing Seal Covers
• Instruktionsmanual
• Note: Wall fixings (screws, rawlplugs) are not supplied and must be sourced separately.

4. Opsætning og installation

Follow these steps for proper installation of your outdoor power socket:

1. Forberedelse: Isolate the mains power supply at the consumer unit/fuse box. Ensure the area for installation is clear and suitable for outdoor electrical equipment.
2. Monteringssted: Choose a flat, stable surface for mounting. The socket is designed for wall mounting.
3. Kabelindgang: The unit features multiple knockouts (5 x 20mm entry points) for versatility, allowing cable entry from the rear, side, top, or bottom. Select the most appropriate entry point for your wiring.


Billede: Bagside view of the socket highlighting the five 20mm cable entry points for flexible installation.

4. Lave: Use appropriate wall fixings (not supplied) to securely mount the socket to the chosen surface. Ensure the two rubber wall fixing seal covers are used to maintain the IP66 rating and prevent water ingress at the screw points.
5. Ledningsføring: The socket features clearly marked terminals with backed-out captive screws and angled in-line colour-coded terminals for fast and easy installation. Connect the Live, Neutral, and Earth wires according to standard wiring practices.


Image: Detail of the fast-fix installation process, showing the angled, color-coded terminals for simplified wiring.

6. Forsegling: After wiring, ensure all cable entries are properly sealed with appropriate glands to maintain the IP66 weatherproof and dustproof rating.
7. Dæksellukning: Close the clear cover securely. The large cover clip is designed for easier operation, allowing you to press to open and close without stiff clips or pinched fingers.

Image: Demonstrating the large cover clip mechanism for easy opening and closing of the socket cover.
8. Endelig kontrol: Once installed, double-check all connections and ensure the cover is fully closed and sealed. Restore power at the consumer unit/fuse box.

Image: The outdoor power socket demonstrating its IP66 weatherproof rating, protecting against dust and water ingress.

5. Betjeningsvejledning

The BG Electrical Single Weatherproof Outdoor Switched Power Socket is straightforward to operate:

• Tænd/sluk: The socket features a switched mechanism. Use the switch on the front of the socket to control the power supply to the connected appliance.
• Strømindikator: A neon LED power indicator is present to show when the socket is live.
• Tilslutning af apparater: Open the clear cover, insert the plug of your appliance into the socket, and then close the cover securely. The design allows for the cover to be closed even with a plug inserted, maintaining the weatherproof seal.


Billede: Hovedproduktet view, showing a plug securely inserted into the socket with the cover closed, and the power indicator illuminated.

• EV Charging Compatibility: This socket is suitable for EV charging with Mode 2 EV charging cables and is designed for long-term charging, meeting all EV regulations.


Image: The outdoor socket in use for EV charging, demonstrating its compatibility and suitability for long-term outdoor power supply.


Image: The weatherproof socket installed on an exterior wall, providing power to an electric vehicle even in rainy conditions.

6. Vedligeholdelse

To ensure the longevity and continued safe operation of your outdoor power socket:

• Rensning: Tør regelmæssigt ydersiden af ​​stikkontakten af ​​med enamp cloth to remove dirt and debris. Do not use abrasive cleaners or solvents. Ensure the power is off before cleaning.
• Inspektion: Regularly check the integrity of the housing, cover, and cable entries for any signs of cracks, damage, or degradation of seals.
• Kabeltilstand: Inspect any connected cables for fraying, cuts, or damage. Replace damaged cables immediately.
• Switch funktionalitet: Ensure the on/off switch operates smoothly and the neon indicator light functions correctly.

7. Fejlfinding

8. Specifikationer

9. Garanti og support

Garanti: The BG Electrical Storm Weatherproof Range products are guaranteed against faulty materials and workmanship for 25 years from the date of purchase. This warranty covers defects in materials and manufacturing under normal use and service.

Støtte: For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact British General customer support. Refer to the product packaging or the official British General webhjemmeside for de seneste kontaktoplysninger.

Gem venligst din købsbevis af garantihensyn.