Casio AW-90H-9EVES Analog-Digital Watch User Manual

Indledning

This manual provides detailed instructions for the proper use and care of your Casio AW-90H-9EVES analog-digital watch. Please read this manual thoroughly to ensure optimal performance and longevity of your timepiece. The watch features both analog hands for traditional time display and a digital display for additional functions such as alarm, chronograph, and dual time.

Billede: Forside view of the Casio AW-90H-9EVES watch, showcasing its black and gold design with both analog and digital displays.

Opsætning

Indstilling af digital tid og dato

1. I tidsvisningstilstand skal du trykke på og holde TILPASSE button (usually top-left) until the seconds start to flash, indicating the setting screen.
2. Tryk på MODE button (usually bottom-left) to cycle through the settings: Seconds → Hour → Minutes → Year → Month → Day.
3. Brug SØGE button (usually top-right) or FORWARD button (usually bottom-right) to increase the flashing value.
4. Når alle indstillinger er justeret, skal du trykke på TILPASSE button again to exit the setting screen.

Adjusting the Analog Hands

The analog hands are typically synchronized with the digital time. If they are out of alignment, refer to the specific hand adjustment procedure:

1. I tidsvisningstilstand skal du trykke på MODE button until you reach the Hand Setting Mode (often indicated by 'H-SET' or similar on the digital display).
2. Tryk og hold på TILPASSE button until the digital time starts flashing.
3. Brug SØGE or FORWARD button to advance the analog hands until they match the digital time.
4. Tryk på TILPASSE knappen for at bekræfte og afslutte.

Betjeningsvejledning

Skift af tilstand

Tryk på MODE button (bottom-left) to cycle through the different modes:

• Tidsvisningstilstand: Viser aktuel tid og dato.
• Alarmtilstand: Indstil og aktiver daglige alarmer.
• Stopurstilstand: Mål forløbet tid.
• Dobbelttidstilstand: Vis en anden tidszone.

Alarmtilstand

1. Naviger til alarmtilstand ved hjælp af MODE knap.
2. Tryk og hold på TILPASSE knappen, indtil alarmtidspunktet begynder at blinke.
3. Brug MODE knappen for at vælge mellem time- og minutindstillinger.
4. Brug SØGE or FORWARD knappen for at ændre den blinkende værdi.
5. Trykke TILPASSE for at bekræfte.
6. Tryk på SØGE button to toggle the alarm ON/OFF. An alarm indicator will appear when active.

Stopurstilstand

1. Naviger til stopurstilstand ved hjælp af MODE knap.
2. Tryk på SØGE knappen for at STARTE stopuret.
3. Tryk på SØGE knappen igen for at STOPPE stopuret.
4. Tryk på TILPASSE button to RESET the stopwatch to zero.

Dobbelt tidstilstand

1. Navigate to the Dual Time Mode using the MODE knap.
2. Tryk og hold på TILPASSE button until the hour setting starts flashing.
3. Brug MODE knappen for at vælge mellem time- og minutindstillinger.
4. Brug SØGE or FORWARD button to change the flashing value for the second time zone.
5. Trykke TILPASSE for at bekræfte.

Opretholdelse

Udskiftning af batteri

The watch is powered by one Lithium-metal battery. The typical battery life is several years, but this can vary based on alarm and backlight usage. When the display becomes dim or functions become unreliable, it is time to replace the battery. Battery replacement should ideally be performed by a qualified watch technician to ensure proper sealing and water resistance.

Vandmodstand

This watch is water resistant up to 50 meters (5 ATM). This means it is suitable for everyday use and can withstand splashes, rain, and brief immersion in water, such as showering or swimming in shallow water. It is not suitable for diving or snorkeling. Do not operate buttons while the watch is wet or submerged, as this can compromise the water resistance.

Rensning

Wipe the watch case and band with a soft, dry cloth. For resin bands, a mild soap solution and water can be used, followed by thorough rinsing and drying. Avoid using harsh chemicals or abrasive cleaners, as these can damage the watch's materials.

Fejlfinding

• Analoge visere matcher ikke digital tid: Perform the "Adjusting the Analog Hands" procedure described in the Setup section.
• Det digitale display er svagt eller tomt: Batteriet kan være lavt eller afladet. Udskift batteriet.
• Knapperne reagerer ikke: Ensure the watch is not wet. If the issue persists, a reset may be required (consult a service center), or the battery may be low.
• Watch loses time: This could indicate a low battery or a need for service.

Specifikationer

Garanti og support

Garantioplysninger

Your Casio AW-90H-9EVES watch comes with a 2-year manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper handling, accidents, unauthorized repairs, or normal wear and tear of the case, strap, or crystal.

Kundesupport

For warranty claims, service, or further assistance, please contact your authorized Casio dealer or visit the official Casio website for regional service center information. Please retain your proof of purchase for warranty validation.