Progress Lighting 2-Light Flush Mount Ceiling Light Fixture User Manual

1. Introduktion

This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your Progress Lighting 2-Light Flush Mount Ceiling Light Fixture, Model P3925-09. This fixture is designed to provide ambient illumination in various interior spaces such as kitchens, hallways, bedrooms, and living rooms. Please read all instructions carefully before beginning installation.

Figure 1: Progress Lighting 2-Light Flush Mount Ceiling Light Fixture (Model P3925-09)

2. Vigtige sikkerhedsoplysninger

For at mindske risikoen for brand, elektrisk stød eller personskade skal du altid følge disse grundlæggende sikkerhedsforanstaltninger:

• ADVARSEL: Turn off electrical power at the circuit breaker or fuse box before installing or servicing the fixture.
• All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unfamiliar with proper electrical wiring installations.
• Denne lampe er kun beregnet til indendørs brug.
• Do not install this fixture in wet locations. It is cCSAus damp-location listed, suitable for damp environments like bathrooms or covered porches, but not direct water exposure.
• Always use bulbs of the correct wattage and type as specified in the product specifications.
• Håndter glaskomponenter forsigtigt for at forhindre brud.
• Forslag 65 Advarsel: Dette produkt kan indeholde kemikalier, som staten Californien kender til at forårsage kræft og fosterskader eller anden reproduktionsskade.

3. Pakkens indhold

Verify that all components listed below are present and undamaged before proceeding with installation. If any parts are missing or damaged, do not attempt to assemble or install the fixture. Contact customer support for assistance.

Figure 2: Diagram of fixture components and assembly steps.

Inkluderede komponenter:

• Mounting strap for outlet box
• Monteringsudstyr (skruer, trådmøtrikker)
• Fixture body with pre-wired electrical leads
• Alabaster glass dome shade
• Decorative finial
• Installationsvejledningsark

Bemærk: Pærer er ikke inkluderet og skal købes separat.

4. Installationsvejledning

Follow these steps to install your ceiling light fixture. It is recommended to have a second person assist during installation to ensure safety and ease of handling.

1. Sluk for strømmen: Before starting, ensure the electrical power to the junction box is turned off at the main circuit breaker or fuse box.
2. Forbered montering: Attach the mounting strap to the outlet box using the provided screws. Ensure the mounting strap is securely fastened.
3. Ledningsforbindelser: Carefully connect the fixture's electrical wires to the corresponding house wires using the provided wire nuts.
   • Tilslut den sorte ledning fra armaturet til den sorte (varme) ledning fra stikkontakten.
   • Tilslut den hvide ledning fra armaturet til den hvide (neutrale) ledning fra stikkontakten.
   • Connect the copper ground wire from the fixture to the green or bare copper ground wire from the outlet box.
   Sørg for, at alle forbindelser er sikre.
4. Monteringsarmaturhus: Carefully tuck the wires into the outlet box. Align the fixture body with the mounting strap and secure it using the provided screws.
5. Installer pærer: Screw two 75-watt maximum, medium base (E26) bulbs or LED equivalents (sold separately) into the sockets.
6. Fastgør glasskærm: Place the alabaster glass dome shade onto the fixture body. Secure it with the decorative finial by screwing it onto the threaded rod at the bottom of the fixture. Do not overtighten.
7. Gendan strøm: Once installation is complete, turn the electrical power back on at the circuit breaker or fuse box.

Figure 3: Detailed installation sheet for Model P3925-09.

5. Operating Your Light Fixture

This fixture operates like a standard ceiling light. Once installed and power is restored, it can be controlled via a wall switch (not included).

• Til/fra: Brug den tilsluttede vægkontakt til at tænde eller slukke lysarmaturet.
• Dæmpning: If using dimmable bulbs and a compatible dimmer switch (both sold separately), you can adjust the light intensity to create your desired ambiance.

6. Vedligeholdelse

Regelmæssig vedligeholdelse vil bidrage til at bevare din lampes udseende og funktionalitet.

• Rensning: To clean the fixture, turn off the power and allow it to cool. Wipe the metal parts with a soft, dry cloth. Clean the glass shade with a mild glass cleaner and a soft cloth. Avoid abrasive cleaners or pads, as they may damage the finish.
• Udskiftning af pære:
  1. Sluk for strømmen til armaturet ved afbryderen.
  2. Carefully unscrew the decorative finial at the bottom of the glass shade.
  3. Remove the glass shade.
  4. Unscrew the old bulbs and replace them with new 75-watt maximum, medium base (E26) bulbs or LED equivalents.
  5. Reattach the glass shade and secure it with the decorative finial.
  6. Gendan strømmen til armaturet.

7. Fejlfinding

If your fixture is not operating correctly, refer to the following table for common issues and solutions:

8. Produktspecifikationer

Figure 4: Dimensional drawing of the fixture, showing 13-1/4" diameter and 5-7/8" height.

Figur 5: Nærbillede view of the brushed nickel finial at the base of the glass shade.

Figur 6: Nærbillede view of the brushed nickel rim of the fixture.

9. Garantioplysninger

This Progress Lighting fixture is backed by a 1 års begrænset garanti. This warranty covers defects in materials and workmanship under normal use and service. For specific terms and conditions, please refer to the warranty documentation included with your product or contact Progress Lighting customer support.

10. Kundesupport

For further assistance, technical support, or to inquire about replacement parts, please visit the official Progress Lighting store or contact their customer service department.

Progress Lighting Butik: Besøg butik