Marcy Under Desk Mini Pedal Exercise Cycle NS-912 User Manual

Indledning

Thank you for choosing the Marcy Under Desk Mini Pedal Exercise Cycle. This compact and portable exercise device is designed for both upper and lower body workouts, offering adjustable magnetic resistance to suit your fitness needs. Please read this manual thoroughly before assembly and operation to ensure safe and effective use of your equipment.

Vigtige sikkerhedsoplysninger

• Kontakt din læge, før du starter et træningsprogram.
• Always place the mini cycle on a stable, flat surface. Use a mat or non-slip pad to prevent movement during use.
• Sørg for, at alle bolte og møtrikker er forsvarligt spændt før hver brug.
• Hold børn og kæledyr væk fra udstyret under drift.
• Stå ikke på pedalerne. Denne enhed er kun beregnet til siddende brug.
• Stop med at træne med det samme, hvis du føler smerter, svimmelhed eller åndenød.
• The maximum weight recommendation of 8 pounds refers to the product's own weight, not the user's weight. This device is intended for seated use, with the user's weight supported by a chair.

Pakkens indhold

Before assembly, ensure all parts are present. Refer to the assembly video for visual guidance.

• Main Frame (#1)
• Base (#2) (2 pieces)
• Base End Caps (#4) (4 pieces)
• Washers (#5)
• M8 Nuts (#6)
• Bolts (#7)
• Computer (#8)
• Lock Knob (#9)
• Crank (#10) with pedals
• Sensor Wire (#11)
• Assembly Tools (Hex Key, Adjustable Wrench - included/not included as per video)

Monteringsvejledning

Follow these steps to assemble your Marcy Mini Pedal Exercise Cycle. An assembly video is provided below for visual assistance.

Montering Video

1. Attach the Bases: Secure the two Base (#2) pieces to the Main Frame (#1) using the Bolts (#7) and Washers (#5). Ensure the Base End Caps (#4) are in place on the bases.
2. Install the Crank: Place the Crank (#10) assembly onto the main frame. Secure it using the Bolts (#7) and M8 Nuts (#6).
3. Attach the Lock Knob: Thread the Lock Knob (#9) into the designated hole on the crank assembly. This knob is used to adjust resistance.
4. Tilslut computeren: Insert the Sensor Wire (#11) into the corresponding port on the Computer (#8). Mount the Computer (#8) onto the main frame.

Betjeningsvejledning

Using the Mini Cycle

The Marcy NS-912 can be used for both lower and upper body exercises.

Træning af underkroppen: Place the mini cycle on the floor in front of a chair. Sit comfortably and place your feet on the pedals. Begin pedaling to engage your leg muscles. Ensure the device is stable and does not slide.

Upper Body Workout: Place the mini cycle on a sturdy table or desk. Sit in front of it and grasp the pedals with your hands. Begin rotating the pedals to exercise your arms and shoulders.

Justering af modstand

Billedbeskrivelse: Et nærbillede view of the tension control knob, labeled "TENSION CONTROL," with indicators for "HIGH" and "LOW" resistance settings.

The mini cycle features adjustable magnetic resistance. To increase resistance, turn the Lock Knob (#9) clockwise. To decrease resistance, turn it counter-clockwise. Adjust the resistance to a level that provides a challenging yet comfortable workout.

Using the Digital Display (Computer)

Billedbeskrivelse: A close-up of the digital display unit, showing buttons for "MODE," "CALORIES," and "SCAN," and indicators for "TIME," "REPS," "CALORIES," and "SCAN."

The integrated computer tracks your workout data. Press the "MODE" button to cycle through different display functions:

• TID: Viser varigheden af ​​din aktuelle træning.
• REPS: Shows the number of revolutions completed during the current session.
• ALT GENTAGELSER: Displays the cumulative number of revolutions since the computer was reset.
• KALORIER: Estimerer de forbrændte kalorier under din træning.
• SCAN: Skifter automatisk gennem alle displayfunktioner med få sekunders mellemrum.

To reset the computer, press and hold the "MODE" button for a few seconds.

Stabilitetsfunktioner

Billedbeskrivelse: Et nærbillede view of the non-slip rubber foot pads on the base of the mini cycle, designed to protect surfaces and enhance stability.

The mini cycle is equipped with rubber foot pads featuring a non-slip texture. These pads help protect your floor or table surface and provide increased stability during use.

Opretholdelse

• Rensning: Tør enheden af ​​med adamp en klud efter hver brug for at fjerne sved og støv. Brug ikke slibende rengøringsmidler.
• Inspektion: Kontrollér regelmæssigt alle bolte, møtrikker og bevægelige dele for fastspænding og slitage. Spænd eventuelle løse fastgørelseselementer.
• Opbevaring: Store the mini cycle in a cool, dry place away from direct sunlight and extreme temperatures.

Fejlfinding

• Enheden glider under brug: Ensure the mini cycle is placed on a non-slip surface or mat. The rubber foot pads are designed to protect surfaces and provide some grip, but additional measures may be needed on smooth floors.
• No resistance or resistance too low: Turn the Lock Knob (#9) clockwise to increase resistance. If resistance is still insufficient, ensure the resistance mechanism is clean and free of obstructions.
• Computer display not working: Check the battery in the computer unit. Replace if necessary. Ensure the sensor wire is securely connected.
• Pedals feel loose: Check and tighten the M8 Nuts (#6) and Bolts (#7) securing the crank assembly.

Specifikationer

Billedbeskrivelse: A diagram illustrating the overall dimensions of the Marcy Mini Cycle: 13 inches in height, 20 inches in depth, and 15.5 inches in width.

Garanti og support

The Marcy NS-912 Mini Pedal Exercise Cycle comes with a two-year limited manufacturer's warranty against defects. For warranty claims or technical support, please contact the manufacturer, Impex.

Fabrikantens kontaktoplysninger: ST UXBRIDGE, ON L9P1P4, CA

For returns, please refer to the retailer's return policy. For purchases made on Amazon, a 30-day return policy typically applies.