Planet Audio AC2600.2

Planet Audio AC26002 Anarchy 2600-watt 2-Channel Amplivligere brugervejledning

Indledning

This manual provides detailed instructions for the installation, operation, and maintenance of your Planet Audio AC26002 Anarchy 2600-watt Full Range Class A/B 2 Channel 2 Ohm Stable AmpLæs venligst denne manual grundigt, før du forsøger at installere eller betjene amplifter for at sikre korrekt brug og forhindre skader.

Sikkerhedsoplysninger

Overhold altid følgende sikkerhedsforanstaltninger under installation og drift:

  • Professionel installation anbefales: Due to the complexity of car audio systems, professional installation is strongly recommended.
  • Afbryd batteriet: Før du starter nogen form for ledningsføring, skal du frakoble bilens negative batteripol for at forhindre kortslutninger.
  • Korrekt ledningsføring: Ensure all wiring is correctly connected and insulated to prevent short circuits and damage to the amplifier or vehicle. Use appropriate gauge wires for power and ground connections.
  • Ventilation: Monter ampOpbevar køleren på et sted, der giver tilstrækkelig luftcirkulation for at forhindre overophedning. Undgå montering i lukkede rum uden ventilation.
  • Undgå fugt: Udsæt ikke ampmodstandsdygtig over for fugt eller vand.
  • Sikker montering: Monter sikkert amplifier to prevent it from coming loose during vehicle movement.
  • Sikringsbeskyttelse: Always use the correct fuse rating as specified. Never replace a fuse with one of a higher ampslette.

Pakkens indhold

Kontroller, at alle varer er til stede i kassen:

  • Planet Audio AC26002 Anarchy Amplivligere
  • Fjernbetjening af subwoofer niveaukontrol
  • Monteringsudstyr (skruer, skiver)
  • Ekstra sikring
Contents of the Planet Audio AC26002 Anarchy ampsikringsboks, inklusive amplifier, remote subwoofer control, fuse, and mounting screws.

Billede: Den amplifier, remote subwoofer control, a fuse, and mounting screws are shown, representing the items included in the product package.

Produkt overview og funktioner

The Planet Audio AC26002 Anarchy amplifier is a 2-channel, full-range Class A/B amplifier designed for car audio systems. Key features include:

  • Strømudgang: 1300 W MAX @ 2 Ohm x 2 Channels, 650 W MAX @ 4 Ohm x 2 Channels, 2600 W MAX Bridged Power @ 4 Ohm x 1 Channel.
  • Topologi: Full-Range, Class A/B.
  • Strømforsyning: MOSFET Power Supply for efficient power delivery.
  • Indgange: Low and High Level Inputs for versatile connection options.
  • Filtre: Variable Low Pass (LP) and High Pass (HP) Filters for precise audio tuning.
  • Bass Boost: Variable Bass Boost for enhanced low-frequency response.
  • Kontrollere: Remote Subwoofer Control for convenient bass level adjustment.
  • Belysning: Blue Backlit Anarchy Logo.
  • Beskyttelse: Thermal, Short, and Overload Protection Circuits.
MOSFET Power Supply icon

MOSFET strømforsyning

2 Ohm Stable icon

2 Ohm stabil

Variable Bass Boost icon

Variabel basforstærkning

Variable Gain Control icon

Variabel forstærkningskontrol

Short Protection icon

Kort beskyttelse

Sub Control icon

Underkontrol

Bridgeable icon

Brobar

Top-down view of the Planet Audio AC26002 Anarchy ampløfter, showcasing its sleek black design and blue illuminated logo.

Billede: Top view of the Planet Audio AC26002 Anarchy amplivligere.

Opsætning og installation

Proper installation is crucial for optimal performance and safety. It is highly recommended to have this amplifier installed by a certified professional.

Monteringssted

Choose a dry, well-ventilated location in your vehicle, such as under a seat or in the trunk. Ensure there is sufficient space around the amplifier for air circulation to prevent overheating. Avoid mounting on carpet or in enclosed compartments without airflow.

Ledningsforbindelser

Refer to the diagram below for typical wiring connections. Always use high-quality wiring and ensure all connections are secure and properly insulated.

Side view of the Planet Audio AC26002 Anarchy amplifier showing input and output terminals, including power, ground, remote, RCA, and speaker connections.

Billede: Side view af amplifier showing all connection terminals.

  • Strøm (BATT+): Connect to the positive terminal of the vehicle's battery using an appropriate gauge power cable and an inline fuse within 18 inches of the battery.
  • Jord (GND): Connect to a clean, unpainted metal surface of the vehicle chassis. Ensure a good electrical connection.
  • Fjernbetjening (REM): Tilslut til fjernbetjeningens tændingskabel fra din hovedenhed. Dette tænder for amptænd og sluk for højttaleren med dit stereoanlæg.
  • RCA-indgange: Tilslut til RCA pre-outs på din hovedenhed for lavniveausignalindgang.
  • Højttalerudgange: Tilslut dine højttalere til amplifier's speaker terminals. Observe correct polarity (+/-). For bridged mode, refer to the specific wiring instructions for your speaker configuration.
  • Højt niveau input: If your head unit does not have RCA outputs, use the high-level inputs by connecting them to your head unit's speaker wires.
  • Fjernbetjening af subwoofer: Connect the remote level control to the designated port on the amplifier for convenient bass adjustment from the driver's seat.

Betjeningsvejledning

Når den er installeret, skal du justere amplifier settings for optimal audio performance.

Få kontrol

Forstærkningskontrollen matcher amplifier's input sensitivity to the output of your head unit. Start with the gain set to minimum. Gradually increase the gain until you hear distortion, then back it off slightly. Do not use the gain control as a volume knob.

Crossover Filters (LPF/HPF)

The AC26002 features variable low-pass (LPF) and high-pass (HPF) filters. Adjust these filters to direct specific frequency ranges to your speakers or subwoofers, optimizing sound quality and preventing distortion.

  • Lavpasfilter (LPF): Used for subwoofers. It allows frequencies below the set point to pass through.
  • Højpasfilter (HPF): Used for full-range or component speakers. It allows frequencies above the set point to pass through.

Bass Boost

The variable bass boost allows you to enhance low frequencies. Use this feature sparingly to avoid distortion and potential speaker damage. Start with the boost at minimum and increase gradually if desired.

Fjernbetjening af subwoofer

Use the wired remote control to adjust the subwoofer output level conveniently from the front of your vehicle.

Opretholdelse

The Planet Audio AC26002 ampLifier kræver minimal vedligeholdelse.

  • Rensning: Tør regelmæssigt af ampRengør ydersiden af ​​apparatet med en blød, tør klud. Brug ikke skrappe kemikalier eller slibende rengøringsmidler.
  • Ventilation: Sørg for ampLifierens køleribber er fri for støv og snavs for at opretholde korrekt varmeafledning.
  • Forbindelser: Kontrollér lejlighedsvis alle ledningsforbindelser for at sikre, at de forbliver fastgjorte.

Fejlfinding

Hvis du oplever problemer med din ampLifier, se følgende almindelige problemer og løsninger:

ProblemMulig årsagLøsning
Ingen strøm / ingen lydBlown fuse, loose power/ground/remote wire, faulty head unit.Check amplifier and inline fuses. Verify all power, ground, and remote connections. Ensure head unit is on and functioning.
Forvrænget lydGain set too high, improper crossover settings, poor speaker connections, damaged speakers.Reduce gain setting. Adjust LPF/HPF. Check speaker wiring for shorts or loose connections. Test speakers.
Amplifier overophedesUtilstrækkelig ventilation, for lav impedans, langvarig høj lydstyrke.Sørg for tilstrækkelig luftgennemstrømning omkring ampKontroller højttalerimpedansen. Reducer lydstyrken eller lad ampvarmebeholder til afkøling.
Protection Mode ActivatedKortslutning i højttalerledninger, amplifier overheating, DC offset.Check speaker wires for shorts. Allow amplifier to cool. Consult a professional if the issue persists.
Motorstøj / HylenPoor grounding, RCA cables too close to power wires, faulty RCA cables.Verify ground connection. Route RCA cables away from power wires. Try different RCA cables.

Specifikationer

Detailed specifications for the Planet Audio AC26002 Anarchy amplivligere:

  • Modelnummer: AC2600.2
  • Max Power Output (2 Ohm): 1300 watt x 2 kanaler
  • Max Power Output (4 Ohm): 650 watt x 2 kanaler
  • Max Bridged Power (4 Ohm): 2600 watt x 1 kanals
  • Topologi: Class A/B, Full-Range
  • Strømforsyning: MOSFET
  • Input følsomhed: Low Level (RCA), High Level (Speaker)
  • Variable Low Pass Filter: Ja
  • Variable High Pass Filter: Ja
  • Variabel basforstærkning: Ja
  • Fjernbetjening af subwoofer: Inkluderet
  • Beskyttelse: Thermal, Short, Overload
  • Dimensioner (L x B x H): 45.72 cm x 25.4 cm x 6.1 cm (18.0 tommer x 10.0 tommer x 2.4 tommer)
  • Vægt: Cirka 10.4 lbs (4.72 kg)
  • Operation Voltage: 12 Volts DC (Max Supply Voltage 16 Volts)
Diagram showing the dimensions of the Planet Audio AC26002 Anarchy amplifier: Length 18.0 inches (457mm), Width 10.0 inches (254mm), Height 2.4 inches (61mm).

Billede: Amplifier dimensions diagram.

Garanti og support

The Planet Audio AC26002 Anarchy amplifier leveres med en 6 Year Platinum Online Dealer Warranty when purchased through authorized online dealers like Amazon.com. Registration may be required after purchase to activate the full warranty.

For technical support or warranty claims, please contact Planet Audio customer service or your authorized dealer. Keep your proof of purchase for warranty validation.

Warranty information graphic stating '6 Year Platinum Online Dealer Warranty' with a note to register online after purchase.

Image: Warranty information graphic.

© 2024 Planet Audio. Alle rettigheder forbeholdes.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.