1.Overview
The Legrand On-Q Surge-Protected Duplex Power Kit (Model 36456902V1) provides a convenient and secure solution for delivering power and surge protection to equipment within structured wiring enclosures, wall installations, and other compatible setups. This kit is designed to safeguard sensitive electronics from voltage spikes while offering a tamper-resistant outlet for enhanced safety.
Image 1.1: The Legrand On-Q Surge-Protected Duplex Power Kit, showing the complete product assembly.
2. Sikkerhedsoplysninger
Please read and understand all instructions before installation and use. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- ADVARSEL: Risiko for elektrisk stød. Afbryd strømmen til afbryderen eller sikringsboksen før installation eller service.
- Installationen skal udføres af en kvalificeret elektriker i overensstemmelse med alle nationale og lokale el-forskrifter.
- Do not install in wet locations or where excessive moisture may be present.
- Sørg for, at alle ledningsforbindelser er sikre og korrekt isolerede.
- Denne enhed er kun beregnet til indendørs brug.
- Do not exceed the electrical ratings of the device (15 Amps, 125 volt).
3. Kitets indhold
Kontroller, at alle komponenter er til stede, før installationen påbegyndes:
- Surge-Protected Duplex Outlet
- Old-Work Electrical Box
- Vægplade
- Monteringsskruer
Image 3.1: This image shows the components included in the kit: a surge-protected outlet, an old-work electrical box, and a wall plate.
4. Funktioner
- Built-In Surge Protection: Safeguards connected devices with integrated surge protection, ideal for powering and protecting equipment in structured wiring enclosures. Provides 340 Joules of surge protection and 24kA Max Surge Capability.
- Audible Alarm with ON/OFF: An integrated audible alarm alerts users to surge protection status. A switch allows the alarm to be turned on or off.
- Surge Protection LED Indicator: A visual LED indicator provides immediate status feedback:
- Steady GREEN = Protected
- Flashing RED = Not Protected
- OFF = No Power to Unit
- Tamper-resistent design: Ensures safety by preventing accidental insertion of foreign objects into the outlet slots.
- Alsidig installation: Compatible with On-Q and other enclosures featuring standard outlet knockouts, or can be used as a standard wall outlet.
- Durable & Reliable: Konstrueret med materialer af høj kvalitet for langvarig ydeevne.
- Additional Wiring Flexibility: Features 2 back wire holes for easier wiring.
Image 4.1: This image illustrates the surge protection capabilities, including 340 Joules of surge protection and 24kA Max Surge Capability.
Image 4.2: This image highlights the audible alarm feature with an ON/OFF switch on the outlet.
Image 4.3: This image explains the Surge Protection LED Indicator: steady green for protected, flashing red for not protected, and off for no power.
Image 4.4: This image details the outlet's specifications, including removable ears, child-safe tamper-resistant shutters, 2 back wire holes, and 15A 125Volt 60Hz cULus listing.
5. Installation
Follow these steps for proper installation of the Legrand On-Q Surge-Protected Duplex Power Kit:
5.1. Forberedelse
- Afbryd strømmen: Turn off power at the main circuit breaker or fuse box before starting any electrical work. Verify power is off using a voltage tester.
- Vælg placering: Choose a suitable location within your structured wiring enclosure or wall for the power kit.
- Fjern udslettelser: If installing in an enclosure, use a utility knife and hammer to carefully remove the desired electrical knockouts for the power kit.
5.2. Ledningsføring og montering
- Install Electrical Box: Insert the provided old-work electrical box into the prepared opening. Use the provided screws to affix the box securely to the enclosure or wall stud.
- Rute ledninger: Route the AC cabling (hot, neutral, ground) into the electrical box.
- Terminate AC Cabling: Connect the AC wires to the surge-protected duplex receptacle. Ensure proper polarity (hot to brass screw, neutral to silver screw, ground to green screw). Tighten all terminal screws firmly.
- Monter stikkontakt: Carefully push the wired receptacle into the electrical box. Screw the receptacle into the box using the provided mounting screws.
- Installer vægplade: Attach the wall plate over the receptacle and secure it with the provided screws.
Video 5.1: This video demonstrates the installation process for the On-Q power kit, showing how to remove knockouts, install the electrical box, wire the receptacle, and secure the cover plate.
Image 5.2: This image shows a diagram illustrating how the power kit is compatible with standard knockouts on both metal and plastic media enclosures.
Image 5.3: This image shows the installed power kit inside an enclosure, providing power and surge protection to networking equipment.
6. Betjening
Once installed and power is restored, the Legrand On-Q Surge-Protected Duplex Power Kit operates automatically to provide power and surge protection.
6.1. Surge Protection Indicator
Observe the LED indicator on the outlet for its status:
- Steady GREEN: Indicates that the surge protection is active and functioning correctly.
- Blinkende RØDT: Indicates that the surge protection has been compromised or is no longer providing protection. The outlet will still provide power, but connected devices are no longer protected from surges. Replacement of the unit is recommended.
- OFF: Indicates no power is supplied to the unit. Check the circuit breaker or wiring connections.
6.2. Hørbar alarm
The audible alarm will sound if the surge protection is compromised (flashing RED LED). Use the ON/OFF switch located on the outlet to silence or activate the alarm as needed.
7. Vedligeholdelse
The Legrand On-Q Surge-Protected Duplex Power Kit requires minimal maintenance. Regular checks are recommended to ensure continued protection.
- Visuel inspektion: Periodically inspect the outlet and wiring for any signs of damage, wear, or loose connections.
- LED-indikatorkontrol: Regularly check the LED indicator to ensure it is steady green, indicating active surge protection. If it is flashing red, the surge protection has been expended, and the unit should be replaced.
- Rensning: Clean the surface of the outlet and wall plate with a soft, dry cloth. Do not use abrasive cleaners or solvents.
8. Fejlfinding
If you encounter issues with your Legrand On-Q Surge-Protected Duplex Power Kit, refer to the following troubleshooting guide:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| No power to outlet (LED OFF) | Circuit breaker tripped; Loose wiring connection; No power to circuit. | Check and reset circuit breaker. Verify all wiring connections are secure. Ensure power is supplied to the circuit. |
| LED is flashing RED (Audible alarm may sound) | Surge protection has been expended due to a power surge. | The surge protection components are no longer functional. The outlet will still provide power, but it no longer protects against surges. Replace the entire unit to restore surge protection. |
| Audible alarm sounds continuously | Surge protection is compromised. | Check the LED indicator. If flashing RED, the unit needs replacement. You can temporarily silence the alarm using the ON/OFF switch. |
| Outlet does not fit flush in box | Obstruction in box; Improperly seated wires. | Ensure wires are neatly folded into the box. Check for any debris or obstructions. Ensure mounting ears are properly aligned. |
9. Specifikationer
| Attribut | Detalje |
|---|---|
| Mærke | On-Q |
| Model | 36456902V1 |
| Farve | Hvid |
| Materiale | Metal |
| Produktmål (L x B) | 7.3 x 3.4 cm |
| Samlet strømudtag | 2 |
| Voltage | 125 volt |
| Ampslette | 15 Amps |
| Forbindelsesteknologi | Hardwired |
| Overspændingsbeskyttelse | 340 Joule |
| Max Surge Capability | 24kA |
| Varens vægt | 1.2 pund |
| Certificeringer | cULus Listed |
Image 9.1: This image provides detailed dimensions of the surge-protected duplex outlet, including its length, width, and depth behind the strap.
10. Garanti og support
10.1. Garantioplysninger
This Legrand On-Q product is covered by a warranty for 12 måneder fra købsdatoen. This warranty covers defects in materials and workmanship under normal use. For specific terms and conditions, please refer to the official warranty documentation provided with your product or contact Legrand On-Q customer service.
10.2. Kundesupport
For technical assistance, troubleshooting, or warranty claims, please contact Legrand On-Q customer support. Contact information can typically be found on the product packaging or the official Legrand On-Q webwebsted.
When contacting support, please have your product model number (36456902V1) and date of purchase readily available.
