ATDEC TH-3270-UFM Full Motion Articulated Wall Mount

1. Produktet er slutview

The ATDEC TH-3270-UFM is a robust full motion articulated wall mount designed to securely hold displays weighing up to 143 pounds (65 kg). This mount features three pivot points, offering comprehensive control over tilt, pan, swing, and extension, allowing for optimal viewing angles. Its SmoothGlide technology and spring-assisted tilting mechanisms facilitate effortless adjustment, enabling a single user to position the screen with ease. The die-cast aluminum arm extends up to 25 inches (635 mm) from the wall. The universal mounting hole pattern ensures compatibility with a wide range of televisions. The unit comes pre-assembled for quick and straightforward installation and supports both portrait and landscape display orientations.

2. Pakkens indhold

Kontroller, at alle komponenter er til stede, før installationen påbegyndes.

• 1 x ATDEC TH-3270-UFM Wall Mount Assembly
• Mounting Hardware Kit (includes various screws, washers, and spacers for wall and display attachment)
• Installationsskabelon

3. Opsætning og installation

Vigtige sikkerhedsoplysninger: Installation requires drilling into walls. Ensure you have the correct tools and understand how to locate wall studs or use appropriate anchors for your wall type. If unsure, consult a qualified professional. Do not exceed the maximum weight capacity of 143 lbs (65 kg).

3.1 Nødvendigt værktøj (medfølger ikke)

• Bore
• Stolpefinder (til montering af træstolper)
• Niveau
• Phillips hovedskruetrækker
• Topnøgle eller justerbar nøgle
• Blyant
• Målebånd

3.2 Installationstrin

1. Bestem monteringssted: Choose a suitable wall location, ensuring it can support the weight of the mount and your display. Use a stud finder to locate wood studs or verify the integrity of concrete/brick walls.
2. Fastgør vægplade: Position the wall plate at the desired height. Use the provided installation template to mark drill holes. Drill pilot holes as per the instructions for your wall type. Secure the wall plate firmly to the wall using the appropriate lag bolts and washers from the hardware kit. Ensure the wall plate is level.
3. Fastgør displaybeslag: Identify the correct screws and spacers from the hardware kit that fit the VESA mounting holes on the back of your display. Attach the display brackets to the back of your television. Ensure they are securely fastened and evenly spaced.
4. Mount Display to Arm: Carefully lift the display and align the display brackets with the mounting plate on the articulated arm. Engage the quick-release mechanism to secure the display onto the mount. Ensure the display is fully seated and locked into place.
5. Kabelstyring: Route display cables through the integrated cable management channels on the articulated arm to maintain a tidy appearance and prevent snagging.

4. Betjening af holderen

The ATDEC TH-3270-UFM mount offers versatile positioning for your display. Its SmoothGlide technology and spring-assisted mechanisms allow for fluid adjustments.

• Udvidelse/tilbagetrækning: Gently pull or push the display to extend it up to 25 inches (635 mm) from the wall or retract it closer to the wall.
• Pan/Swing: Rotate the display horizontally to achieve the desired viewing angle. The articulated arm allows for a wide range of left-to-right movement.
• Vip: Adjust the vertical angle of the display. The spring-assisted tilt mechanism allows for easy upward or downward angling to reduce glare or optimize viewing from different heights.
• Pivot (Landscape/Portrait): The display can be rotated 90 degrees to switch between landscape and portrait orientations. Ensure cables are not strained during this adjustment.

5. Vedligeholdelse

Regelmæssig vedligeholdelse sikrer vægbeslagets levetid og sikre drift.

• Periodisk eftersyn: Annually, inspect all mounting screws and bolts to ensure they remain tight. Check for any signs of wear or damage to the mount components.
• Rensning: Rengør holderen med en blød, tør klud. Undgå slibende rengøringsmidler eller opløsningsmidler, der kan beskadige overfladen.
• Smøring: The SmoothGlide technology is designed for low maintenance. Avoid applying lubricants unless specifically instructed by ATDEC support, as this may interfere with the mechanism.

6. Fejlfinding

6.1 Mount Movement is Stiff

• Ensure no cables are caught in the articulated arm joints.
• Verify that the display weight is within the specified limit (143 lbs / 65 kg).
• Check if any adjustment screws (if present on specific joints) are overtightened. Loosen slightly if necessary, but ensure stability.

6.2 Display Not Level

• Re-check the level of the wall plate during installation.
• Some mounts allow for minor post-installation leveling adjustments on the display brackets. Consult the detailed installation guide provided with the product for specific instructions.

6.3 Mount Appears Unstable

• Immediately remove the display from the mount.
• Re-inspect all wall mounting points and display bracket connections. Ensure all screws and bolts are securely tightened.
• Verify that the wall structure is adequate to support the combined weight of the mount and display.
• If instability persists, discontinue use and contact ATDEC support or a qualified installer.

7. Specifikationer

8. Garantioplysninger

The ATDEC TH-3270-UFM Full Motion Articulated Wall Mount comes with a 10 års garanti. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For specific terms and conditions, refer to the official ATDEC warranty documentation or contact ATDEC customer support.

9. Support

For technical assistance, missing parts, or warranty inquiries, please contact ATDEC customer support. Refer to the ATDEC official webwebstedet for de seneste kontaktoplysninger og supportressourcer.

ATDEC Official Webwebsted: www.atdec.com