Eltako EVA12-32A AC strømmåler brugermanual

1. Introduktion

This manual provides essential information for the safe and efficient use of the Eltako EVA12-32A AC Current Meter. Please read this manual thoroughly before installation and operation.

2. Sikkerhedsoplysninger

ADVARSEL: Installation and maintenance of this device should only be performed by a qualified electrician. Incorrect installation can lead to electric shock, fire, or damage to the device and other equipment.

• Afbryd altid strømmen, før du installerer eller servicerer måleren.
• Sørg for, at alle forbindelser er sikre og overholder lokale el-forskrifter.
• Overskrid ikke den angivne strøm og volumentage ratings of the device.
• The device is designed for indoor use in dry environments.

3. Produktet er slutview

The Eltako EVA12-32A is an AC current meter designed for DIN rail mounting. It measures active energy consumption and displays it on an integrated screen. The device stores consumption data in non-volatile memory.

Nøglefunktioner:

• Energy consumption display with integrated screen.
• Measures active energy as an AC current meter.
• Data stored in non-volatile memory.
• Lavt standby-tab: kun 0.5 W.
• Designet til DIN-skinnemontering.

Figur 1: Eltako EVA12-32A AC Current Meter, showing the display and terminal connections from an angled perspective.

4. Installation

The Eltako EVA12-32A is designed for easy mounting on a DIN rail within an electrical panel. It is strongly recommended that installation be carried out by a qualified electrician.

Installationstrin:

1. Strømafbrydelse: Før du starter, skal du sørge for, at hovedstrømforsyningen til elpanelet er helt afbrudt. Bekræft med en voltmeter.tage tester.
2. Montering: Snap the meter onto the DIN rail in the desired position.
3. Ledningsføring: Connect the phase (L) and neutral (N) wires according to the markings on the device.
• Terminalerne mærket L are for the input and output of the phase wire. The device measures current flowing through this connection. Ensure the cross-section of these wires is equal to or greater than the existing phase cable in the electrical panel.
• The terminal labeled N is for the neutral connection, which powers the meter. A smaller cross-section cable (e.g., 1.5mm²) can be used for this connection.
• Maximum cable size without terminals is 6mm². Note that the cable insertion depth is relatively small.
4. Sikre forbindelser: Spænd alle terminalskruer godt fast for at forhindre løse forbindelser, som kan forårsage overophedning eller funktionsfejl.
5. Strømgendannelse: Når alle forbindelser er sikre og verificeret, skal strømmen til elpanelet genoprettes.

Figur 2: Front view of the Eltako EVA12-32A AC Current Meter, showing the digital display and control buttons.

5. Betjening

After successful installation and power-up, the Eltako EVA12-32A will begin measuring and displaying energy consumption.

Display og navigation:

• The integrated screen displays various parameters, including active energy (kWh), current (A), voltage (V), and power (W).
• Use the "MODE" and "SELECT" buttons (refer to Figure 2) to cycle through the displayed values and access historical data (e.g., hourly, daily, monthly, yearly consumption).
• The meter stores consumption data in non-volatile memory, ensuring data retention even during power outages.

Vigtige bemærkninger:

• The display is not backlit. For optimal readability, ensure the meter is installed in a well-lit area.
• This meter is not MID-certified and therefore not approved for monetary electricity billing in Europe. It is intended for informational purposes and internal consumption monitoring.

6. Vedligeholdelse

The Eltako EVA12-32A is designed for maintenance-free operation. However, periodic checks are recommended.

• Rensning: If necessary, gently wipe the exterior of the meter with a dry, soft cloth. Do not use abrasive cleaners or solvents.
• Tilslutningskontrol: Periodically, and only after disconnecting power, verify that all electrical connections remain tight and free from corrosion.
• Miljøforhold: Sørg for, at driftsmiljøet forbliver inden for de angivne temperatur- og luftfugtighedsområder.

7. Fejlfinding

8. Specifikationer

• Model: EVA12-32A
• Fabrikant: Eltako
• Type: AC strømmåler
• Maks strøm: 32 A
• Standbytab: 0.5 W
• Dimensioner (L x B x H): 9.1 x 7 x 2.5 cm
• Vægt: 5 gram
• MID Conformity: Not applicable (not approved for monetary billing)
• Varemodelnummer: 4912093

9. Garanti og support

The Eltako EVA12-32A comes with a 1 års tilgængelighed af reservedele. For warranty claims or technical support, please contact your retailer or the manufacturer directly.

For further assistance, please refer to the official Eltako webwebsted eller kontakt deres kundeserviceafdeling.