Perel E305DIN1 DIN Rail Week Timer Instruction Manual

1. Introduktion

This manual provides detailed instructions for the installation, operation, and maintenance of your Perel E305DIN1 DIN Rail Week Timer. Please read this manual thoroughly before using the device to ensure proper function and safety. The Perel E305DIN1 is designed for precise daily and weekly control of electrical circuits.

2. Funktioner

The Perel E305DIN1 DIN Rail Week Timer offers a range of functionalities for efficient time management of electrical devices:

• Daglig og ugentlig programmering: Allows for flexible scheduling across days and weeks.
• 8 ON/OFF Program Locations: Konfigurer op til 8 forskellige tænd- og sluk-tidspunkter.
• LCD-skærm: Clear display of time, day of the week, and current operating status.
• NiMH Backup Battery: Integrated battery provides up to 200 hours of autonomy after a full charge, preserving settings during power outages.
• 3-Way Manual Override: Easily switch between ON, OFF, and AUTO modes manually.
• Monteringsmuligheder: Designed for DIN rail mounting or wall mounting using the included bracket.
• Gennemsigtigt beskyttelsesdæksel: Provides protection for the display and controls.

3. Opsætning og installation

Advarsel: Installation should only be performed by a qualified electrician. Ensure the main power supply is disconnected before commencing installation.

3.1 Montering

The E305DIN1 timer can be mounted in two ways:

• DIN-skinnemontering: Snap the timer onto a standard 35mm DIN rail within an electrical enclosure.
• Vægmontering: Use the provided bracket to secure the timer to a wall. Ensure the mounting surface is stable and capable of supporting the device.

3.2 Elektrisk tilslutning

Refer to the wiring diagram provided with the device for specific connection points. General steps include:

1. Connect the main power supply (220-250VAC, 50Hz) to the designated input terminals.
2. Connect the load (device to be controlled) to the output terminals. Ensure the load's specifications do not exceed the timer's maximum output capacity (16A resistive, 8A inductive).
3. Dobbelttjek alle forbindelser for tæthed og korrekthed, før du genopretter strømmen.

Image: Perel E305DIN1 DIN Rail Week Timer. This image shows the front view of the timer, highlighting its LCD display, control buttons, and transparent protective cover.

4. Betjeningsvejledning

After installation and power-up, the timer's internal battery will charge. Allow sufficient time for the battery to charge for optimal backup functionality.

4.1 Indstilling af aktuel tid og dag

1. Tryk på UR knap.
2. Mens du holder UR, tryk på DAG knappen for at indstille den aktuelle ugedag.
3. Mens du holder UR, tryk på TIME knappen for at indstille den aktuelle time.
4. Mens du holder UR, tryk på MIN knappen for at indstille det aktuelle minut.

4.2 Programmering af tænd/sluk-tider

The timer allows for up to 8 ON/OFF program pairs.

1. Tryk på PROG button once to enter program mode. The display will show '1 ON'.
2. Brug DAG, TIME, og MIN buttons to set the desired ON time for program 1.
3. Trykke PROG igen. Displayet vil vise '1 OFF'.
4. Brug DAG, TIME, og MIN buttons to set the desired OFF time for program 1.
5. Repeat steps 1-4 for programs 2 through 8.
6. Tryk på UR button to exit program mode and return to normal operation.

4.3 Manual Override Function

The manual override function allows you to temporarily change the timer's output state without affecting programmed settings.

• Tryk på MANUEL knap for at bladre gennem tilstandene:
• PÅ: The output is continuously ON, overriding any programmed OFF times.
• OFF: The output is continuously OFF, overriding any programmed ON times.
• BIL: Timeren fungerer i henhold til de programmerede TIL/FRA-skemaer.

5. Vedligeholdelse

The Perel E305DIN1 timer requires minimal maintenance.

• Rensning: Tør ydersiden af ​​med en blød, tør klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
• Batteri-sikkerhedskopi: The internal NiMH battery is designed for long life. If the timer frequently loses its settings during power outages, the battery may need replacement by a qualified technician.
• Miljøforhold: Ensure the timer operates within its specified temperature range (-10°C to 40°C) and avoid excessive humidity or direct sunlight.

6. Fejlfinding

If you encounter issues with your Perel E305DIN1 timer, refer to the following common problems and solutions:

• Timeren tænder/slukker ikke som programmeret:
  • Tjek om timeren er i gang AUTO mode. If it's in ON or OFF manual override, it will ignore programs.
  • Verify that the programmed ON/OFF times are correctly set and correspond to the current day.
  • Ensure the current time and day are accurately set on the timer.
• Skærmen er tom eller flimrer:
  • Kontroller hovedstrømforsyningen til timeren.
  • If power is present, the internal backup battery might be completely discharged. Allow the timer to be powered for several hours to recharge the battery.
• Timeren mister indstillinger efter strømafbrydelsetage:
  • The internal NiMH backup battery may not be fully charged or may be at the end of its lifespan. Ensure the timer is continuously powered for at least 24 hours to fully charge the battery. If the issue persists, the battery may need replacement.
• Time drift (timer becomes inaccurate over time):
  • The timer has a specified accuracy of ±1 minute per month. Minor adjustments may be necessary periodically. If the drift is significantly higher, contact support.

Hvis disse trin ikke løser problemet, bedes du kontakte kundesupport.

7. Specifikationer

Below are the technical specifications for the Perel E305DIN1 DIN Rail Week Timer:

8. Garanti og support

This Perel product is covered by a standard manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions. For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the Perel customer service department.

Gem din købskvittering som købsbevis af garantihensyn.