SCUBAPRO Air 2 Alternate Inflation Regulator Instruction Manual

1. Introduktion

The SCUBAPRO Air 2 Alternate Inflation Regulator is a 5th generation device designed to combine the functions of a second stage regulator and a balanced inflator into a single, compact housing. This integration streamlines your diving equipment by eliminating the need for a separate alternate air source, enhancing safety and convenience underwater.

This manual provides essential information for the proper setup, operation, and maintenance of your Air 2 regulator. Adhering to these instructions will ensure optimal performance and longevity of the device.

Figur 1: Forside view of the SCUBAPRO Air 2 Alternate Inflation Regulator.

2. Opsætning og tilslutning

The Air 2 is designed for universal compatibility, featuring a standard 3/8" hose thread for seamless integration with most scuba setups. Proper connection is crucial for safe operation.

1. Attach the Low-Pressure Hose: Connect the supplied low-pressure hose to the Air 2 regulator. Ensure the connection is secure and hand-tightened.
2. Connect to BCD: Attach the Air 2's inflator mechanism to your Buoyancy Control Device (BCD) inflator hose.
3. Bekræft forbindelser: Before diving, always perform a thorough check of all connections to ensure there are no leaks and all components are securely fastened.

Figur 2: Side view of the SCUBAPRO Air 2 with the low-pressure hose connected.

Figur 3: Detaljeret view of the hose connection point on the Air 2 regulator.

3. Betjeningsvejledning

The Air 2 is designed for intuitive use, combining inflation/deflation controls with an alternate air source function.

3.1. Inflation og deflation

• Inflation: Press the red button (inflator button) to add air to your BCD. The air-balanced power inflator valve ensures a steady stream of air.
• deflation: Press the gray button (deflator button) to release air from your BCD. The large purge button is designed for easy operation, even with thick gloves.

3.2. Alternate Air Source Function

In an emergency out-of-air situation, the Air 2 serves as a reliable alternate air source. Its integrated design means you always know where to locate your backup regulator.

• Vejrtrækning: The Air 2 features a comfortable mouthpiece, allowing it to be used for breathing directly.
• Dive/Pre-Dive Switch: The Air 2 includes a fixed Venturi Initiated Vacuum Assist (VIVA) Flow Vane with a dive/pre-dive switch. This switch allows you to adjust the regulator mechanism to prevent free-flow at the surface or in strong currents, and to optimize breathing performance during a dive.

Figur 4: Nærbillede view of the mouthpiece, red inflator button, gray deflator button, and dive/pre-dive switch on the Air 2.

4. Vedligeholdelse

Regular maintenance is essential to ensure the safety and performance of your SCUBAPRO Air 2 regulator.

• Skylning: After each dive, thoroughly rinse the Air 2 with fresh water while it is still pressurized to prevent water ingress into the internal components. Once rinsed, depress the purge button briefly to clear any water from the mouthpiece.
• Tørring: Allow the regulator to air dry completely in a shaded, well-ventilated area. Avoid direct sunlight or excessive heat.
• Opbevaring: Store the Air 2 in a cool, dry place, away from direct sunlight, chemicals, and extreme temperatures.
• Professionel servicering: It is recommended to have your Air 2 regulator professionally serviced by an authorized SCUBAPRO technician annually or after every 100 dives, whichever comes first. This ensures all internal components are inspected, cleaned, and replaced as necessary.

Figure 5: The SCUBAPRO Air 2 regulator shown with its low-pressure hose detached, illustrating components for cleaning and inspection.

5. Fejlfinding

If you encounter issues with your Air 2 regulator, consider the following common troubleshooting steps. For persistent problems, contact an authorized service center.

• Fritflydende regulator: If the regulator free-flows, ensure the dive/pre-dive switch is in the 'pre-dive' position when not actively breathing. Check for debris in the mouthpiece or diaphragm.
• Hård vejrtrækning: Verify that the low-pressure hose is securely connected and that your tank has sufficient air pressure. Ensure the dive/pre-dive switch is in the 'dive' position.
• Lækager: Inspect all hose connections for tightness. Check O-rings for damage or displacement. If a leak persists, professional inspection is required.
• Inflator Malfunction: Ensure the BCD inflator mechanism is clean and free of sand or salt crystals. Check the quick-disconnect fitting for proper engagement.

6. Specifikationer

7. Garanti og support

For warranty information, product support, or to locate an authorized service center, please refer to the official SCUBAPRO webwebstedet eller kontakt deres kundeservice direkte. Gem din købsbevis til eventuelle garantikrav.