Attwood 3540-7 LED Bi-Color Navigation Sidelights Instruction Manual

Indledning

This manual provides instructions for the proper installation, operation, and maintenance of your Attwood 3540-7 LED Bi-Color Navigation Sidelights. These lights are designed to provide essential navigation lighting for marine vessels up to 65.6 feet (20 meters) in length. Please read these instructions thoroughly before installation and use.

Sikkerhedsoplysninger

Always observe basic safety precautions when working with electrical systems on a boat. Failure to do so may result in property damage, serious injury, or death.

• Disconnect power to the circuit before installing or servicing the navigation light.
• Ensure all wiring connections are secure and properly insulated to prevent short circuits and corrosion.
• Verify that the light is suitable for your vessel's size and type according to local and international regulations (e.g., USCG, ABYC).
• Do not modify the product. Use only genuine Attwood replacement parts if necessary.

Pakkens indhold

Kontroller, at alle komponenter er til stede, før installationen påbegyndes:

• Attwood 3540-7 LED Bi-Color Navigation Sidelight unit
• Monteringsudstyr (skruer)
• Instruktionsark (dette dokument)

Image: Attwood 3540-7 LED Bi-Color Navigation Sidelights in its retail packaging, showing the product and its UPC.

Opsætning og installation

The Attwood 3540-7 is designed for deck mounting on the bow of your vessel.

Monteringssted

• The light must be mounted on the centerline of the vessel's bow.
• Sørg for en uhindret view of the red (port) and green (starboard) lights from the required angles (112.5 degrees each, totaling 225 degrees forward).
• The light is rated for vessels up to 65.6 feet (20 meters) in length.

Billede: Forside view of the Attwood 3540-7 LED Bi-Color Navigation Sidelight, showing the clear lenses for red and green lights.

Installationstrin

1. Forbered monteringsoverfladen: Choose a flat, stable surface on the bow. Clean the area thoroughly.
2. Marker borehuller: Position the light and mark the locations for the mounting screws. Ensure the light is oriented correctly with the red lens to port (left) and green lens to starboard (right).
3. Bor pilothuller: Drill pilot holes appropriate for the provided mounting screws. Also, drill a hole for the wiring to pass through the deck.
4. Ledningsføring: Connect the light's wires to your boat's 12-volt DC electrical system. Typically, the black wire is negative (-) and the colored wire (often red) is positive (+). Ensure connections are watertight and insulated. The light draws 2.4 watts at 12 volts DC.
5. Secure Light: Fasten the light to the deck using the provided stainless steel screws. Do not overtighten. Apply a marine-grade sealant around the base of the light and screw heads to prevent water intrusion.
6. Test funktionalitet: Restore power and verify that both the red and green lights illuminate correctly. Check the integrated telltale indicators on top of the housing.

Billede: Vinklet view of the Attwood 3540-7 LED Bi-Color Navigation Sidelight, highlighting its compact design and stainless steel housing.

Betjeningsvejledning

The Attwood 3540-7 LED Bi-Color Navigation Sidelights operate as part of your boat's 12V DC electrical system, typically controlled by a switch at the helm.

• Aktivering: Turn on the designated navigation light switch on your boat's control panel.
• Telltale Indicators: The light unit features integrated telltale indicators on top of the housing. These small lights confirm that the main navigation lights are illuminated and functioning.
• Sigtbarhed: The light provides 225 degrees of visibility, with 112.5 degrees for the red (port) light and 112.5 degrees for the green (starboard) light.

Image: The Attwood 3540-7 LED Bi-Color Navigation Sidelight with both red and green lights illuminated, demonstrating its operational state.

Opretholdelse

The Attwood 3540-7 LED Bi-Color Navigation Sidelights are designed for durability and minimal maintenance.

• Rensning: Periodically clean the lenses with fresh water and a soft cloth to remove salt, dirt, or marine growth. Avoid abrasive cleaners that could scratch the lens material.
• Inspektion: Regularly inspect the light for any signs of damage, loose mounting, or corrosion on the wiring connections.
• LED levetid: The LED elements are rated for over 50,000 hours of use and remain cool to the touch, reducing the need for frequent bulb replacement.
• Korrosionsbestandighed: The unit features a corrosion-resistant, watertight housing, but proper installation and sealing are crucial for long-term performance in marine environments.

Billede: Top view of the Attwood 3540-7 LED Bi-Color Navigation Sidelight, showing the integrated telltale indicators and mounting screw.

Fejlfinding

If you encounter issues with your navigation light, refer to the following common problems and solutions:

Specifikationer

Garanti og support

Attwood Corporation provides a 10-year warranty for the 3540-7 LED Bi-Color Navigation Sidelights against defects in materials and workmanship. For warranty claims, technical support, or replacement parts, please contact Attwood customer service directly. Keep your proof of purchase for warranty validation.

For further assistance, visit the official Attwood webwebstedet eller kontakt deres kundesupportafdeling.