BANDAI Ultraman Tiga Deluxe Spark Lens Transform Device Figurine Instruction Manual

Indledning

Tak for købetasing the BANDAI Ultraman Tiga Deluxe Spark Lens Transform Device Figurine. This device allows you to recreate the iconic transformation of Ultraman Tiga with light and sound effects. Please read this manual carefully before use to ensure proper operation and safety.

Opsætning

Pakkens indhold

• DX Spark Lens Main Unit: 1

Installation af batteri

The DX Spark Lens requires 4 AAA batterier (sold separately). Follow these steps for battery installation:

1. Locate the battery cover on the back of the Spark Lens.
2. Løsn skruen på batteridækslet med en skruetrækker.
3. Fjern batteridækslet.
4. Insert 4 new AAA batteries, ensuring the correct positive (+) and negative (-) polarity as indicated inside the compartment.
5. Sæt batteridækslet på igen, og spænd skruen godt fast.

Vigtig: Battery replacement should always be performed by an adult.

Image: The Ultraman Tiga Deluxe Spark Lens device, shown held in a hand, ready for use.

Betjeningsvejledning

Transformation Sequence

To activate the transformation sequence:

1. Locate the power switch (ON/OFF) on the device.
2. Skub afbryderen til ON (O) position.
3. Press the main button on the device.
4. The wings will open, the LED light will illuminate, and the transformation sound will play.

To close the wings, manually push them back into position from both sides.

Image: The Ultraman Tiga Deluxe Spark Lens device with its wings extended, showcasing its activated state.

Vedligeholdelse og pleje

Almen pleje

• This product contains precise electronic components. Do not drop, get wet, or disassemble the device.
• Avoid using or storing the product in areas with extremely high or low temperatures.
• For safety, do not use the toy if it is damaged or deformed.
• Do not place this product on resin figures or vinyl materials for extended periods, as color transfer may occur.
• Do not forcefully pull or bend movable parts or attachment points in unnatural directions.

Forholdsregler for batteri

Improper battery usage can lead to heat generation, rupture, or leakage. Please observe the following:

• Bland ikke gamle og nye batterier eller forskellige typer batterier.
• Always insert batteries with the correct positive (+) and negative (-) polarity.
• Remove used batteries from the unit immediately.
• If the product will not be used for an extended period, remove the batteries to prevent leakage.
• Never short-circuit, recharge, disassemble, heat, or dispose of batteries in fire.
• If battery fluid gets into eyes, immediately wash with plenty of water and consult a doctor. If it gets on skin or clothing, wash with water.

Fejlfinding

If the device does not function as expected, please check the following:

• No Power/No Sound/No Light:
  • Ensure the power switch is in the ON (O) position.
  • Kontroller, om batterierne er isat korrekt med den rigtige polaritet.
  • Udskift gamle eller afladede batterier med nye.
  • Sørg for, at batteridækslet er forsvarligt lukket.
• Wings Not Opening/Closing Properly:
  • Ensure there are no obstructions preventing the wings from moving.
  • Do not force the wings; if they are stuck, gently check for any foreign objects.

Hvis problemerne fortsætter efter at have kontrolleret disse punkter, bedes du kontakte kundesupport.

Specifikationer

Garanti og support

For warranty information or customer support, please refer to the product packaging or contact BANDAI customer service directly. Keep your purchase receipt for any warranty claims.