Indledning
The TECHKO S063 Portable Door Wedge Guard is designed to enhance security by detecting unauthorized entry through a door. This device functions as a door stop and incorporates both vibration and contact sensors to trigger a loud alarm upon detection of forced entry.
Please read this manual thoroughly before operating the device to ensure proper use and optimal performance.
Sikkerhedsoplysninger
- Denne enhed er kun beregnet til indendørs brug.
- Udsæt ikke enheden for vand eller overdreven fugt.
- Opbevares utilgængeligt for børn.
- Ensure correct battery polarity when installing.
- Fjern batterierne, hvis enheden ikke skal bruges i en længere periode.
- The alarm produces a loud sound (120 dB). Avoid prolonged exposure to prevent hearing discomfort.
Pakkens indhold
- 1 x TECHKO S063 Portable Door Wedge Guard
- (Note: 9-volt battery not included)
Produkt overview
Figur 1: The TECHKO S063 Portable Door Wedge Guard. This image shows the device from an angled perspective, highlighting the main body, the ON/OFF switch on the side, and the metal contact plate at the front. The alarm speaker is visible on the top surface.
- Alarmhøjttaler: Emits a loud 120 dB alarm.
- Metal Contact Plate: Detects pressure when a door attempts to open over it.
- TÆND/SLUK -kontakt: Activates or deactivates the alarm system.
- Batterirum: Located on the underside (not visible in this view), holds one 9-volt battery.
Opsætning
1. Batteriinstallation
- Find batteridækslet på undersiden af enheden.
- Skub eller åbn dækslet for at få adgang til rummet.
- Insert one standard 9-volt battery, ensuring correct polarity (+ and - terminals match).
- Luk batterirummets dæksel forsvarligt.
2. Placering
- Place the door wedge guard firmly under the door you wish to secure.
- Ensure the metal contact plate is positioned to be depressed if the door is opened.
- The wedge design should prevent the door from opening while also providing a stable base for the alarm.
Betjeningsvejledning
- Arming the Device: After placing the device under the door, slide the ON/OFF switch to the "ON" position. The unit will arm after a 10-second delay. This delay allows you to exit the room without triggering the alarm.
- Alarmaktivering: The alarm will sound instantly if:
- Significant vibration is detected (e.g., someone attempting to force the door open).
- The metal contact plate is depressed (e.g., the door pushes against the wedge).
- Disarming the Device: To stop the alarm, slide the ON/OFF switch to the "OFF" position.
Opretholdelse
Udskiftning af batteri
When the alarm sound becomes weak or the device fails to activate, it is time to replace the 9-volt battery. Follow the battery installation steps outlined in the "Setup" section.
Rensning
Tør enheden af med en blød, tør klud. Brug ikke slibende rengøringsmidler, og enheden må ikke nedsænkes i vand.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Alarmen lyder ikke. | Batteriet er dødt eller forkert installeret. | Udskift batteriet, og sørg for korrekt polaritet. |
| Alarmen er for stille. | Lavt batteri. | Udskift batteriet. |
| Alarm triggers accidentally. | Device is too sensitive or improperly placed. | Adjust placement to ensure it's stable and not subject to minor vibrations. Ensure the 10-second arming delay is respected. |
| Alarm does not stop. | Switch is stuck or faulty. | Slide the ON/OFF switch to "OFF". If it persists, remove the battery. Contact customer support if the issue continues. |
Specifikationer
- Model: S063
- Alarmvolumen: 120 dB
- Strømkilde: 1 x 9-volt batteri (medfølger ikke)
- Opdagelse: Vibration and Contact Sensor
- Dimensioner: Cirka 21.59 x 15.49 x 4.32 cm (8.5 x 6.1 x 1.7 tommer)
- Vægt: Cirka 454 g (1 lb)
- Fabrikant: Techko
Garanti og support
For warranty information or technical support, please refer to the product packaging or contact TECHKO customer service directly. Contact details are typically available on the manufacturer's official webwebsted eller inkluderet dokumentation.
Gem venligst din købskvittering i tilfælde af garantikrav.