Indledning
Thank you for choosing the Progress Lighting P5604-31 1-Light Traditional Outdoor Wall Lantern. This fixture features a durable black powder-coated finish and a white opal glass diffuser, designed to enhance the exterior of your home. This manual provides essential information for safe installation, proper operation, and effective maintenance of your new lighting fixture.
Nøglefunktioner:
- One Light Wall Lantern from the Utility Lantern collection
- Højde: 8.50 tommer, bredde: 6.00 tommer
- Style: Traditional Outdoor
- Finish: Sort
- Safety Rating: UL CUL and Safety Listing: Wet (suitable for outdoor use)
Sikkerhedsoplysninger
WARNING: RISK OF ELECTRIC SHOCK. Turn off power at the circuit breaker or fuse box before installation or servicing. Consult a qualified electrician if you are unsure about electrical wiring.
- Læs alle instruktioner omhyggeligt, før installationen påbegyndes.
- Al ledningsføring skal være i overensstemmelse med nationale og lokale el-forskrifter.
- Sørg for, at armaturet er korrekt jordet.
- Overskrid ikke det maksimale wattage specificeret for pæren.
- Brug sikkerhedsbriller og handsker under installationen.
Pakkens indhold
Kontroller, at alle komponenter er til stede, før installationen påbegyndes:
- 1 x Light Fixture (P5604-31)
- 1 x White Opal Glass Diffuser
- 1 x Installation Sheet
- Monteringsudstyr (skruer, trådmøtrikker osv.)
Note: Bulb is not included. This fixture uses (1) 100-Watt maximum medium base (E26) incandescent bulb.

Figure 1: Line drawing of the P5604-31 fixture, showing its spherical glass and mounting base.
Installationsvejledning
Follow these general steps for installing your outdoor wall lantern. Refer to the included installation sheet for detailed, model-specific instructions and diagrams.
1. Forbered til installation
- Sluk for strømmen ved hovedafbryderen eller sikringsskabet.
- Pak forsigtigt armaturet og komponenterne ud.
- Review the included installation sheet for specific wiring and mounting details.
2. Wall Lantern Placement and Sizing
Proper sizing and placement are crucial for both aesthetics and effective illumination. For entrances and garages, select fixtures that measure approximately 1/4 to 1/3 of the door's height. Mount them at eye level, about 5.5 to 6 feet from the ground to the center of the fixture.

Figur 2: Eksample of wall lantern sizing, recommending 1/4 of the door's height for the fixture.

Figur 3: Eksample of wall lantern placement for a garage, suggesting fixtures on either side of the doors.
3. Ledningsføring og montering
- Fastgør monteringsbeslaget til samledåsen ved hjælp af de medfølgende skruer.
- Connect the fixture's wires to the house wires according to the color codes (usually black to black, white to white, and ground to ground). Secure connections with wire nuts.
- Stik forsigtigt alle ledninger ind i samledåsen.
- Mount the fixture to the mounting bracket, securing it with the provided screws.
- Install the glass diffuser and bulb.
4. Video Guide: Sizing and Selection
For additional guidance on selecting and sizing outdoor lighting, watch the official Progress Lighting video below:
Video 1: Progress Lighting's guide on sizing and selecting outdoor lighting fixtures for various home exteriors.
Operation
Once installed, your Progress Lighting P5604-31 fixture operates like any standard outdoor light. Simply use your existing wall switch to turn the light on or off. Ensure the correct type and wattage of bulb (100-Watt maximum, medium base E26 incandescent) is installed for optimal performance and safety.
Opretholdelse
Rensning
To maintain the appearance of your fixture, clean it regularly with a soft, damp klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler, da disse kan beskadige overfladen eller glasset. Sørg for, at strømmen er slukket, før rengøring.
Udskiftning af pære
Before replacing the bulb, turn off the power to the fixture at the circuit breaker. Allow the bulb to cool completely. Carefully remove the glass diffuser, unscrew the old bulb, and screw in a new 100-Watt maximum medium base (E26) incandescent bulb. Reattach the glass diffuser securely.
Fejlfinding
Hvis dit armatur ikke fungerer korrekt, kan du se følgende almindelige problemer og løsninger:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lyset tænder ikke | 1. Strømmen er slukket 2. Bulb is faulty 3. Forkert ledningsføring | 1. Kontroller afbryderen/sikringen 2. Udskift pæren 3. Verify wiring connections (consult electrician if needed) |
| Lyse flimrer | 1. Løs pære 2. Løs ledningsforbindelse 3. Inkompatibel lysdæmperkontakt | 1. Spænd pæren 2. Check wiring connections (power off first) 3. Ensure dimmer is compatible with incandescent bulbs |
Specifikationer
- Mærke: Fremskridtsbelysning
- Modelnummer: P5604-31
- UPC: 785247560448
- Materiale: Glas, Metal
- Slutte: Sort
- Stil: Traditionel
- Værelsestype: Udendørs
- Lysarmaturform: Væg
- Lyskilde: Glødelampe
- Antal lyskilder: 1
- Wattage: 100 watt (maks.)
- Pære base: E26 (medium)
- Voltage: 120 volt
- Emnemål (L x B x H): 8.5 cm L x 6 cm B x 8.5 cm H
- Varens vægt: 1.5 pund
- Vandmodstandsniveau: Vandtæt
- Installationstype: Vægmontering
Garanti og support
Garantioplysninger
Denne Progress Lighting-armatur er dækket af en 1 års begrænset producentgarantiDenne garanti dækker materiale- og fabrikationsfejl ved normal brug. Gem venligst din købsbevis i tilfælde af garantikrav.
Kundesupport
For technical assistance, missing parts, or warranty inquiries, please contact Progress Lighting customer service. Refer to the contact information provided on the original packaging or visit the official Progress Lighting webwebsted for supportdetaljer.
Online ressourcer: Progress Lighting-butik på Amazon