Casio PQ-30B Digital Alarm Clock User Manual

Indledning

This manual provides detailed instructions for the proper use and maintenance of your Casio PQ-30B Digital Alarm Clock. Please read this manual thoroughly before using the product to ensure correct operation and to prevent damage.

Sikkerhedsforanstaltninger

• Udsæt ikke uret for ekstreme temperaturer, direkte sollys eller høj luftfugtighed.
• Avoid strong impacts or dropping the clock.
• Forsøg ikke at skille uret ad eller reparere det selv. Kontakt kvalificeret servicepersonale.
• Opbevar batterier utilgængeligt for børn. Søg straks læge ved indtagelse.
• Bortskaf brugte batterier i henhold til lokale regler.

Komponenter og kontroller

Dette billede viser forsiden view of the Casio PQ-30B digital alarm clock. It features a digital display showing '10:58 PM', a prominent 'SNOOZE/LIGHT' button, and several control buttons and switches at the bottom for setting time and alarm functions.

Familiarize yourself with the following controls:

• SNOOZE/LIGHT-knap: Activates the snooze function when the alarm sounds or illuminates the display for a few seconds.
• MIN knap: Adjusts minutes during time or alarm setting.
• HR knap: Adjusts hours during time or alarm setting.
• Time/Alarm Mode Selector (Slide Switch):
  • TM SET: Til indstilling af det aktuelle klokkeslæt.
  • AL SÆT: For setting the alarm time.
  • NORM: Normal tidsvisningstilstand.
• Alarm ON/OFF/SNZ Selector (Slide Switch):
  • AL ON: Activates the alarm.
  • AL OFF: Deactivates the alarm.
  • SNZ: Activates the snooze function (alarm will sound again after approximately 8 minutes).
• 12HR/24HR Button: Skifter mellem 12-timers og 24-timers tidsformater.

Opsætning

Installation af batteri

The clock requires two LR44 batteries (included). To install or replace batteries:

1. Åbn batterirummets dæksel på bagsiden af ​​uret.
2. Insert the two LR44 batteries, ensuring the correct polarity (+/-) as indicated inside the compartment.
3. Luk batterirummets dæksel forsvarligt.

Indledende tidsindstilling

After installing batteries, the display will show a default time. Set the current time as follows:

1. Slide the Time/Alarm Mode Selector switch to TM SET.
2. Tryk på HR button to set the hour. Hold it down for faster adjustment.
3. Tryk på MIN button to set the minutes. Hold it down for faster adjustment.
4. Tryk på 12HR / 24HR button to select your preferred time format (12-hour with AM/PM indicator or 24-hour).
5. Once the correct time is set, slide the Time/Alarm Mode Selector switch back to NORM.

Betjeningsvejledning

Indstilling af alarmtid

1. Slide the Time/Alarm Mode Selector switch to AL SET. The alarm time will be displayed.
2. Tryk på HR knappen for at indstille den ønskede alarmtime.
3. Tryk på MIN knappen for at indstille de ønskede alarmminutter.
4. Slide the Time/Alarm Mode Selector switch back to NORM.

Aktivering/deaktivering af alarmen

• To activate the alarm, slide the Alarm ON/OFF/SNZ Selector switch to AL ON. An alarm indicator (often a bell icon or similar) will appear on the display.
• To deactivate the alarm, slide the Alarm ON/OFF/SNZ Selector switch to AL OFF. The alarm indicator will disappear.

Brug af Snooze/Light-funktionen

• Når alarmen lyder, skal du trykke på SNOOZE / LYS knappen for midlertidigt at stoppe alarmen. Alarmen lyder igen efter cirka 8 minutter.
• For at tænde displayet når som helst, tryk på SNOOZE / LYS button. The light will stay on for a few seconds.
• To stop the alarm completely after it sounds (without snooze), slide the Alarm ON/OFF/SNZ Selector switch to AL OFF.

Switching 12-Hour / 24-Hour Format

In NORM tilstand, tryk på 12HR / 24HR button to toggle between the 12-hour format (with AM/PM indicator) and the 24-hour format.

Opretholdelse

• Rensning: Wipe the clock with a soft, dry cloth. Do not use abrasive cleaners or chemical solvents.
• Udskiftning af batteri: Replace batteries when the display becomes dim or the alarm weakens. Always replace both batteries at the same time.
• Opbevaring: If not using the clock for an extended period, remove the batteries to prevent leakage.

Fejlfinding

• Skærmen er tom eller svag: Kontroller batteriinstallationen. Udskift batterierne om nødvendigt.
• Alarmen lyder ikke: Ensure the Alarm ON/OFF/SNZ Selector switch is set to AL ON. Verify the alarm time is correctly set.
• Forkert tidsvisning: Re-set the current time following the 'Initial Time Setting' instructions.

Specifikationer

Garanti og support

This Casio product is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or contact Casio customer support. Keep your purchase receipt as proof of purchase.