Moen 8113 Commercial M-Dura To-grebs Laboratoriearmatur Brugermanual

Indledning

This manual provides detailed instructions for the installation, operation, and maintenance of your Moen 8113 Commercial M-Dura Two-Handle Laboratory Faucet. Please read this manual thoroughly before beginning installation or operation to ensure proper function and longevity of your product.

Figure 1: Moen 8113 Commercial M-Dura Two-Handle Laboratory Faucet, shown in chrome finish with two lever handles and a high-arc spout.

Opsætning og installation

Proper installation is crucial for the optimal performance of your faucet. It is recommended that installation be performed by a qualified professional.

Tjekliste før installation:

• Sørg for, at alle nødvendige komponenter er til stede som angivet på emballagen.
• Verify that the mounting surface has a minimum diameter hole of 1-5/16 inches for single-hole installation.
• Confirm access to 3/8-inch compression supply lines.
• Sluk for hovedvandforsyningen, før installationen påbegyndes.

Installationstrin:

1. Forbered monteringsoverfladen: Clean the area where the faucet will be installed. Ensure the hole is clear and correctly sized.
2. Installer vandhanehuset: Insert the faucet body into the mounting hole. Secure it from underneath the counter using the provided mounting hardware. Tighten securely to prevent movement.
3. Tilslut vandforsyningsledninger: Attach the 3/8-inch stainless steel supply lines to the hot and cold water connections. Ensure connections are tight to prevent leaks. The faucet includes 15-inch supply lines.
4. Tilslut afløbssamling (hvis relevant): Follow the instructions provided with your drain assembly for proper connection to the faucet.
5. Test for lækager: Slowly turn on the main water supply. Check all connections for any signs of leakage. If leaks are detected, tighten the connections as needed.
6. Skyl systemet: Run both hot and cold water through the faucet for several minutes to clear any debris from the lines.

Figur 2: Eksample of a Moen faucet installed in a laboratory environment, demonstrating typical usage.

Betjeningsvejledning

The Moen 8113 faucet features a two-handle lever design for precise control of water temperature and flow.

Vandgennemstrømning og temperaturkontrol:

• Varmt vand: The left lever handle controls the hot water. Turn the handle a 1/4 turn counter-clockwise to open the hot water flow.
• Koldt vand: The right lever handle controls the cold water. Turn the handle a 1/4 turn clockwise to open the cold water flow.
• Temperaturjustering: Mix hot and cold water by adjusting both lever handles simultaneously to achieve the desired temperature.
• Flowhastighed: The faucet is equipped with a flow aerator limiting the maximum flow rate to 2.2 gallons per minute (gpm).
• Indikatorer: Hot and cold color indicators are present on the handles for easy identification.

Vedligeholdelse og pleje

Regelmæssig vedligeholdelse vil bidrage til at bevare finishen og funktionaliteten af ​​din Moen-vandhane.

Rengøring af finishen:

• Rengør krombelægningen med en blød,amp klud og mild sæbe.
• Undgå slibende rengøringsmidler, stærke kemikalier eller skuresvampe, da disse kan beskadige overfladen.
• Skyl grundigt med rent vand og tør med en blød klud for at undgå vandpletter.

Vedligeholdelse af patroner:

• The faucet features a heavy-duty quarter turn ceramic disc cartridge. These are designed for durability and typically require minimal maintenance.
• In case of persistent drips or leaks, the cartridge may need inspection or replacement. Consult a qualified plumber or Moen customer support for assistance.

Vandalmodstand:

• The faucet is equipped with vandal-resistant screws to deter tampering. Special tools may be required for servicing these components.

Fejlfinding

Dette afsnit omhandler almindelige problemer, du kan støde på med din vandhane.

If you are unable to resolve an issue using these steps, please contact Moen Customer Support or a qualified plumber.

Specifikationer

Garantioplysninger

The Moen 8113 Commercial M-Dura Two-Handle Laboratory Faucet is backed by a 5 års begrænset garanti. This warranty covers defects in material and manufacturing for a period of five years from the date of purchase. For full details regarding warranty coverage, terms, and conditions, please refer to the official Moen warranty documentation or contact Moen Customer Support.

Support og ressourcer

For additional assistance, detailed diagrams, or to purchase replacement parts, please utilize the following resources:

• Officiel brugervejledning (PDF): Download PDF-brugervejledning
• Moen Brand Store: Explore other Moen products and resources at the Official Moen Store.
• Kundesupport: Contact Moen customer service for technical support or warranty claims. Refer to the Moen webhjemmeside for aktuelle kontaktoplysninger.