Sikkerhedsoplysninger
ADVARSEL: To avoid fire, shock, or death, turn off power at the circuit breaker or fuse box and test that power is off before wiring. All wiring should be performed by a qualified electrician in accordance with national and local electrical codes.
- Always disconnect power before working on electrical circuits.
- Sørg for, at alle ledningsforbindelser er sikre og korrekt isolerede.
- Overskrid ikke enhedens angivne elektriske klassificeringer.
- Denne enhed er kun beregnet til indendørs brug.
Produkt overview
The Eaton 270V-SP-L is a standard grade straight blade duplex receptacle designed for reliable electrical connections in residential and commercial applications. It features enhanced design elements for easier installation and secure mounting.
Figur 1: Forside view of the Eaton 270V-SP-L Duplex Receptacle.
Nøglefunktioner:
- Longer, wider straps provide 40% more contact area to the wallboard, reducing floating installations.
- Patented built-in wire stripper for No.14 and No.12 wire for faster installation.
- Patented built-in wire looper for pre-looping wires.
- Tri-combo screws accept slotted, Phillips, and Robertson-head tools for installation flexibility.
- Terminal screws are backed out and ready for wiring.
- Side wire terminals accept up to No.10 solid or stranded wire.
- Push-in terminals accept No.14 solid wire.
- 2-Pole/3-wire grounding design.
- UL498, CSA C22.2 No. 42, and NOM certified.
Specifikationer:
| Mærke | Eaton |
| Model | 270V-SP-L |
| Farve | Elfenben |
| Ampslette | 15 Amps |
| Voltage | 125 volt |
| NEMA Rating | 5-15 |
| Samlet strømudtag | 2 |
| Materiale | Plast |
| Dimensioner (L x B x H) | 2/3-Inch x 1-1/3-Inch x 4-1/5-Inch |
| Certificeringer | UL498, CSA C22.2 No. 42, NOM |
Installationsvejledning
Follow these steps carefully to install your Eaton duplex receptacle. Ensure power is OFF before beginning.
- Sluk for strømmen: Locate the circuit breaker or fuse box controlling the outlet you are replacing or installing. Turn off the power to that circuit and verify it is off using a voltage tester.
- Forbered ledninger: If replacing an old receptacle, carefully disconnect the existing wires. For new installations, strip approximately 1/2 inch of insulation from the ends of the circuit wires (hot, neutral, and ground). The built-in wire stripper on the receptacle can assist with this.
- Tilslut ledninger:
- Jordledning (grøn eller bart kobber): Connect to the green grounding screw on the receptacle.
- Neutral ledning (hvid): Connect to the silver-colored terminal screws.
- Hot Wire (Black or Red): Connect to the brass-colored terminal screws.
Note: The receptacle features side wire terminals for looping wires around screws or push-in terminals for No.14 solid wire. Ensure connections are tight.
- Monter stikkontakt: Carefully fold the wires into the electrical box. Insert the receptacle into the box and secure it using the mounting screws provided. The longer, wider straps help ensure a stable installation.
- Installer vægplade: Attach the decorative wall plate over the installed receptacle, securing it with the center screw.
- Gendan strøm: Turn the power back on at the circuit breaker or fuse box. Test the receptacle to ensure proper function.
Figur 2: Tilbage view illustrating wiring terminals for hot, neutral, and ground connections.
Operation
Once properly installed and power is restored, the Eaton 270V-SP-L duplex receptacle functions as a standard electrical outlet. Simply insert a compatible 2-prong or 3-prong plug into either of the two receptacles to draw power.
- Ensure plugs are fully inserted into the receptacle.
- Do not force plugs into the receptacle.
- Avoid overloading the circuit by plugging in too many high-power devices.
Opretholdelse
The Eaton duplex receptacle requires minimal maintenance. Regular inspection and cleaning can help ensure its longevity and safe operation.
- Rensning: Periodically wipe the surface of the receptacle and wall plate with a soft, damp klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler. Sørg for, at strømmen er slukket, før rengøring.
- Inspektion: Regularly check for any signs of damage, such as cracks, discoloration, or loose connections. If any damage is observed, turn off power and have the receptacle inspected and replaced by a qualified electrician.
- Løse stik: If plugs feel loose when inserted, it may indicate wear. Consider replacing the receptacle to maintain a secure connection and prevent arcing.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen strøm ved beholderen. | Circuit breaker tripped or fuse blown. Loose wiring connection. | Check and reset the circuit breaker or replace the fuse. Turn off power and inspect wiring connections for tightness. |
| Receptacle feels warm. | Overloaded circuit. Loose connection. Faulty device. | Unplug some devices to reduce load. Turn off power and check wiring connections. If problem persists, replace the receptacle. |
| Plug falls out easily. | Worn out receptacle contacts. | Udskift beholderen. |
If you experience issues not listed here or if troubleshooting steps do not resolve the problem, consult a qualified electrician.
Garanti og support
Eaton products are manufactured to high-quality standards. For specific warranty information and technical support, please refer to the documentation included with your purchase or visit the official Eaton webwebsted. Behold din købskvittering som købsbevis i tilfælde af garantikrav.
For further assistance, you may contact Eaton customer service through their official channels.