Westek 6043BC Touch Pad Dimmer Instruction Manual

Indledning

The Westek 6043BC Touch Pad Dimmer is designed to convert any standard incandescent lamp into a touch-controlled dimmable lamp. This device allows you to easily adjust the light output with a simple touch, offering three levels of illumination. It is compatible with incandescent bulbs up to 200 Watts. This manual provides detailed instructions for safe installation, operation, and maintenance of your touch pad dimmer.

Produktegenskaber

Touch Light Control: Simply touch the pad to turn the light on or change the illumination level.
Justerbar lysstyrke: Offers three distinct light settings, ranging from a low night light to full brightness.
Praktisk design: Works with incandescent bulbs up to 200 Watts, eliminating the need for specialized 3-way bulbs.
Moderne stil: Features a contemporary black finish and sleek design that complements various home decors.
Nem installation: Designed for simple plug-in functionality to add dimmer capabilities to your existing table or floor lamps.

Sikkerhedsoplysninger

Læs og forstå venligst alle instruktioner før installation og brug. Gem denne manual til senere brug.

Kun til indendørs brug.
Overskrid ikke det maksimale wattage of 200 Watts for incandescent bulbs.
Sørg for at lamp is unplugged from the wall outlet before installation.
Avoid using with LED or CFL bulbs unless specifically rated as dimmable and compatible with touch dimmers. Incompatible bulbs may flicker or be damaged.
Do not use this dimmer control with another dimmer in the same circuit.
Holdes væk fra vand og fugt.

Opsætning og installation

Follow these steps to install your Westek 6043BC Touch Pad Dimmer:

Forbered Lamp: Sørg for din lamp is unplugged from the wall outlet. Replace the existing light bulb with a standard incandescent bulb (up to 200 Watts).
Connect the Dimmer: Tilslut lamp's power cord into the receptacle on the Westek 6043BC dimmer unit.
Sæt i stikkontakten: Plug the dimmer unit into a standard wall outlet.
Position the Touch Pad: Place the touch pad in a convenient location. The touch pad is designed to detect contact with any metallic conductive surface, which then controls the lamp. Ensure the touch pad wire is not pinched or damaged.

Back of Westek 6043BC packaging showing installation diagram

Figure 1: Installation diagram from product packaging. Shows how to connect the lamp to the dimmer and the dimmer to the wall outlet, along with the touch pad connection.

Westek 6043BC Touch Pad Dimmer main unit with plug

Figure 2: The main dimmer unit, which plugs into the wall and accepts the lamp's plug.

Westek 6043BC Touch Pad Dimmer touch pad

Figure 3: The circular touch pad component, which is used to control the lamp.

Betjeningsvejledning

Once installed, operate the dimmer as follows:

Turn On/Adjust Brightness: Lightly touch the metal touch pad. The lamp will cycle through three brightness levels: low, medium, and high.
Sluk: After the high brightness setting, touching the pad again will turn the lamp slukket.
Power Outage: I tilfælde af en magt outage, the dimmer may reset. Simply touch the pad to resume normal operation.

Opretholdelse

The Westek 6043BC Touch Pad Dimmer requires minimal maintenance. Ensure the unit and its connections are kept clean and dry. Do not attempt to open or repair the unit yourself, as this may void the warranty and pose a safety risk.

Fejlfinding

Problem	Mulig årsag	Løsning
Lamp tænder eller dæmper ikke.	Lamp not properly plugged into dimmer. Dimmer not properly plugged into wall outlet. Lamp's internal switch is off. Incompatible bulb (LED/CFL). Defekt pære. Power outage eller afbryderen er udløst.	Sørg for lamp cord is fully inserted into the dimmer. Ensure dimmer is fully inserted into a working wall outlet. Drej lamp's original switch to the ON position. Replace with a standard incandescent bulb (up to 200W). Udskift pæren. Check your home's power supply and circuit breakers.
Lamp flimren eller brummen.	Incompatible bulb (LED/CFL). Løs pæreforbindelse.	Replace with a standard incandescent bulb (up to 200W). Spænd pæren i dens fatning.
Lamp turns on by itself occasionally.	Electrical interference (e.g., during thunderstorms, power fluctuations).	This can be normal behavior during electrical disturbances. Simply touch the pad to turn it off.

Specifikationer

Model: 6043 f.Kr
Mærke: Westek
Driftstilstand: ON-NONE-OFF (3-level dimming)
Maks. Watttage: 200 Watts (Incandescent bulbs only)
Voltage: 120V, 60Hz
Kontrolmetode: Røre
Emnemål (L x B x H): 3.9 x 1 x 7.9 tommer
Varens vægt: 3.8 ounce
Materiale: Multi (Brass contact material)
Farve: Sort
Kun indendørs brug: Ja

Garanti og support

The Westek 6043BC Touch Pad Dimmer comes with a limited warranty. For specific warranty details, please refer to the product packaging or contact Westek customer support. For technical assistance or further inquiries, please visit the official Westek webwebsted eller kontakt deres kundeserviceafdeling.

Fabrikant: AmerTac

Kundeservice: 201.661.9945

Webwebsted: www.amertac.com

Westek 6043BC