And 286373

Duck Brand Indendørs/Udendørs Tæppebånd Model 286373 Brugermanual

Model: 286373 | Size: 1.41 Inch x 42 Feet

1. Produktet er slutview

The Duck Brand Indoor/Outdoor Carpet Tape, Model 286373, is a double-sided adhesive tape designed for securing carpets in both indoor and outdoor environments. Its high-strength construction provides resistance to water and mildew, making it suitable for areas where moisture may be present. The tape features an easy-to-remove liner for efficient application.

Nøglefunktioner:

  • Durable construction for permanent carpet installation.
  • Excellent adhesion to both smooth and rough surfaces.
  • Fiberglass reinforced for enhanced durability.
  • Suitable for various indoor and outdoor carpet materials.
  • Dimensions: 1.41-inch width x 42-foot length.
  • Rubber adhesive with recommended operating temperature range of 50°F to 110°F.
Duck Brand Indoor/Outdoor Carpet Tape packaging

Image 1: Duck Brand Indoor/Outdoor Carpet Tape packaging, showing the roll of white tape inside a green and brown box.

2. Sikkerhedsoplysninger

  • Always use caution when handling cutting tools such as scissors or utility knives to cut the tape.
  • Ensure the application surface is clean and dry to achieve optimal adhesion and prevent accidents.
  • Avoid applying tape in temperatures below 50°F (10°C) or above 110°F (43°C) to maintain adhesive performance.
  • Opbevares utilgængeligt for børn og kæledyr.

3. Installationsvejledning

Follow these steps for proper application of the Duck Brand Indoor/Outdoor Carpet Tape:

  1. Forbered overfladen: Thoroughly clean and dry the floor surface where the carpet will be installed. Ensure it is free from dust, debris, and moisture.
  2. Apply Tape (Initial Placement): Apply the tape to the floor surface with the liner side up. Press firmly to ensure good adhesion to the floor.
  3. Position Carpet: Roll or fold one half of the carpet back over itself to expose the taped area.
  4. Remove Liner and Secure Carpet: Remove the tape liner from the exposed section. Carefully unroll or unfold the carpet onto the tape, pressing firmly to ensure good adhesion between the carpet and the tape.
  5. Repeat for Remaining Half: Repeat steps 3 and 4 for the other half of the carpet.
Diagram showing double-sided tape application steps

Image 2: Diagram illustrating the double-sided adhesive application process, including surface preparation, tape placement, and carpet securing.

Hands cutting Duck Brand carpet tape with scissors

Image 3: A person's hands cutting a strip of white Duck Brand carpet tape from the roll using black-handled scissors.

Applying carpet tape near a baseboard

Image 4: A person applying the white carpet tape to a wooden floor near a white baseboard, with a roll of tape and a carpet edge visible.

Applying carpet tape to a concrete surface

Image 5: A person kneeling and applying a strip of white carpet tape to a concrete floor, preparing for outdoor carpet installation.

Peeling back carpet to show tape on concrete

Image 6: A person lifting a gray outdoor carpet to reveal the white carpet tape adhered to the concrete surface underneath.

Securing carpet in a corner with tape

Image 7: A person pressing down a beige carpet into a corner, securing it over the applied carpet tape on a wooden floor.

4. Betjeningsvejledning

Once applied, the carpet tape provides a strong, permanent bond. No further operation is required beyond initial installation. Ensure the carpet is pressed down firmly across the entire taped area to maximize adhesion.

5. Vedligeholdelse

The Duck Brand Indoor/Outdoor Carpet Tape requires minimal maintenance after proper installation. For optimal longevity, store unused tape in a cool, dry place away from direct sunlight and extreme temperatures. The tape's water and mildew resistance helps maintain its integrity in various conditions.

6. Fejlfinding

Dårlig vedhæftning:

  • Forberedelse af overfladen: Ensure the surface was thoroughly cleaned and dried before application. Any dust, grease, or moisture can compromise adhesion.
  • Temperatur: Verify that the application temperature was within the recommended range of 50°F to 110°F (10°C to 43°C). Extreme temperatures can affect the adhesive's performance.
  • Tryk: Confirm that sufficient pressure was applied to both the tape when adhering to the floor and the carpet when adhering to the tape. Firm pressure is crucial for a strong bond.

Tape Residue Upon Removal:

  • This tape is designed for permanent applications. While the liner is easy to remove, the adhesive itself is strong and intended for long-term hold. Removal may leave residue, especially on certain surfaces or after prolonged periods.

7. Specifikationer

Mærke And
Modelnummer 286373
Farve Hvid
Materiale Plastic (Tape), Fiberglass (Reinforcement)
Dimensioner 1.41 inches (W) x 42 feet (L)
Genstands tykkelse 1 millimeter
Anbefalede anvendelser Indoor, Outdoor Carpet Installation
Kompatibelt materiale Carpet, Drywall, Concrete
Vandmodstandsniveau Vandtæt
Varens vægt 5.4 ounce
Fabrikant Shurtape Technologies
UPC 075353071960

8. Garanti og support

Garantibeskrivelse: Liability is limited to replacement or refund of the product cost. For detailed information, please call 1-800-321-0253.

For further assistance or inquiries, please contact Duck Brand customer support.

© 2025 Duck Brand. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.