Indledning
This manual provides instructions for the safe and proper use of the Valcom VP-412A 400 mA -12V DC Power Supply. This power supply is designed to provide 12V DC power at 400mA for compatible Valcom equipment, such as the V-2952.
Vigtige sikkerhedsoplysninger
- Læs alle instruktioner før brug.
- Do not expose the power supply to moisture or extreme temperatures.
- Sørg for, at strømforsyningen er tilsluttet en korrekt jordet stikkontakt.
- Do not attempt to open or repair the power supply. Refer all servicing to qualified personnel.
- Use only with devices that require 12V DC and a maximum of 400mA. Connecting to incompatible devices may cause damage.
Produkt overview
The Valcom VP-412A is a compact wall-mount power adapter. It converts standard AC wall power to a stable 12V DC output suitable for various electronic devices.

This image displays the Valcom VP-412A power supply. It consists of a black power adapter block with two prongs for wall outlet connection, and an attached black cable terminating in a right-angle DC barrel connector. A label on the power block shows 'VALCOM CLASS 2 POWER SUPPLY INPUT 120VAC 60Hz 12W OUTPUT 12VDC 400mA CLASS 2 TRANSFORMER'.
Opsætningsinstruktioner
- Bekræft kompatibilitet: Before connecting, ensure your device requires a 12V DC power input and draws no more than 400mA. Check your device's specifications or user manual.
- Opret forbindelse til enhed: Insert the DC barrel connector from the VP-412A power supply into the corresponding power input port on your Valcom device. Ensure a secure connection.
- Tilslut til stikkontakten: Plug the power supply's AC prongs into a standard 120VAC 60Hz wall outlet.
- Tænd: Når den er tilsluttet, burde din enhed modtage strøm. Se enhedens manual for specifikke tændingsprocedurer.
Betjening af strømforsyningen
The Valcom VP-412A power supply operates continuously when plugged into an active AC outlet. It provides a stable 12V DC output to the connected device. There are no user-adjustable settings or controls on the power supply itself.
- Always ensure the power supply is securely plugged into both the wall outlet and the device.
- To disconnect power, unplug the power supply from the wall outlet first, then disconnect from the device.
Vedligeholdelse og pleje
- Keep the power supply clean and free from dust. Use a soft, dry cloth for cleaning.
- Brug ikke flydende rengøringsmidler eller aerosoler.
- Opbevar strømforsyningen på et køligt, tørt sted, når den ikke er i brug.
- Inspect the cable and connector periodically for any signs of damage. If damage is observed, discontinue use and replace the unit.
Fejlfinding
Hvis din enhed ikke modtager strøm, skal du overveje følgende:
- Ingen strøm til enheden:
- Ensure the power supply is firmly plugged into a working wall outlet. Test the outlet with another device.
- Verify the DC barrel connector is fully inserted into your device's power input.
- Confirm that your device is compatible with a 12V DC, 400mA power supply. Using an incorrect power supply can prevent operation or cause damage.
- Check the power supply cable for any visible damage (cuts, kinks).
- Enhedsfejl: If the device powers on but malfunctions, ensure the power supply's voltage and current ratings match your device's requirements precisely. Incorrect voltage or insufficient current can lead to unstable operation.
If troubleshooting steps do not resolve the issue, contact Valcom customer support or a qualified technician.
Specifikationer
| Modelnummer | VP-412A |
| Input bindtage | 120VAC, 60Hz |
| Input Wattage | 12W |
| Udgang Voltage | 12VDC |
| Udgangsstrøm | 400mA |
| Produktmål (L x B x H) | 2 x 1.61 x 2.6 tommer |
| Varens vægt | 10.4 ounce (ca. 0.65 lbs) |
| Afkølingsmetode | Luft |
| Connector Type | DC Barrel Connector (Note: Product data may list ATX, but visual inspection confirms a DC barrel connector.) |
Garantioplysninger
Valcom products are typically covered by a limited warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Valcom webwebsted. Gem din købsbevis til garantikrav.
Kundesupport
For technical assistance, product inquiries, or warranty service, please contact Valcom customer support:
- Webwebsted: www.valcom.com (Besøg den officielle webwebstedet for aktuelle kontaktoplysninger.)
- Refer to your product packaging or the Valcom website for phone numbers and email contacts.







