IOGEAR GHPU01 USB to Serial Adapter Instruction Manual

1. Introduktion og overview

The IOGEAR GHPU01 USB to Serial Adapter (UC232A) provides an external serial (DB-9 male) Plug-n-Play connection for computers, notebooks, and handheld computing devices that support USB. This adapter facilitates high-quality serial connections for devices such as PDAs, digital cameras, modems, and ISDN terminal adapters, supporting data transfer rates over 230Kbps. It makes the USB interface transparent to serial peripherals, simplifying connectivity and eliminating traditional serial port setup complexities. The device also supports energy-saving suspend and resume operations.

Nøglefunktioner:

• Full Compliance with USB specification v1.1
• Supports the RS-232 Serial interface
• Understøtter automatisk håndtrykstilstand
• Over 230 Kbps data transfer rate
• Supports Remote wakeup and power management
• Giver en buffer på 96 byte for hver opstrøms og nedstrøms dataoverførsel
• Easy installation - no software required

2. Pakkens indhold

Please verify that all items are present in your package. If any items are missing or damaged, contact your retailer.

• 1 x IOGEAR GHPU01 USB to Serial Adapter
• 1 x Brugermanual (dette dokument)

3. Systemkrav

• Available USB port (USB 1.1 or higher)
• Operating System: Windows 98SE/ME/2000/XP (or later with built-in USB-to-serial support)
• Compatible serial device (e.g., PDA, digital camera, modem, ISDN terminal adapter)

4. Opsætning og installation

4.1 Hardwareinstallation

1. Find en ledig USB-port på din computer.
2. Connect the USB Type-A plug of the IOGEAR GHPU01 adapter into the USB port on your computer.
3. Connect your serial device (e.g., PDA, digital camera) to the DB-9 male serial port on the IOGEAR GHPU01 adapter.
4. Ensure both your computer and the serial device are powered on.

4.2 Driver Installation (No Software Required)

The IOGEAR GHPU01 USB to Serial Adapter is designed for easy Plug-n-Play installation, requiring no additional software drivers for most compatible operating systems. Upon connecting the adapter, your system should automatically recognize and configure the device.

Image: The IOGEAR GHPU01 USB to Serial Adapter, showing its USB connector on one end and the DB-9 serial port on the other, ready for connection to a computer and a peripheral device.

5. Betjeningsvejledning

Once the adapter is successfully installed and recognized by your operating system, it functions as a transparent serial port. Any software or application designed to communicate with a serial device can now use the virtual serial port created by the adapter.

5.1 Using with Serial Devices

1. Ensure your serial device is properly connected to the adapter's DB-9 port.
2. Open the application on your computer that requires communication with the serial device.
3. Within the application's settings, select the appropriate COM port assigned to the IOGEAR GHPU01 adapter. This COM port number can typically be found in your operating system's Device Manager under "Ports (COM & LPT)".
4. Configure the serial communication parameters (e.g., baud rate, data bits, parity, stop bits, flow control) within your application to match those of your serial device. The adapter supports automatic handshake mode.
5. Initiate communication as per your application's instructions.

5.2 Strømstyring

The adapter supports remote wakeup and power management features. This allows the adapter and connected devices to enter low-power states when not in use and resume quickly when needed, contributing to energy efficiency.

6. Vedligeholdelse

The IOGEAR GHPU01 USB to Serial Adapter requires minimal maintenance.

• Hold adapteren ren og fri for støv. Brug en blød, tør klud til rengøring.
• Undgå at udsætte adapteren for ekstreme temperaturer, fugtighed eller direkte sollys.
• Do not attempt to open or repair the adapter yourself. Refer to qualified service personnel for any repairs.
• Ensure cables are not bent sharply or subjected to excessive strain to prevent damage to the connectors.

7. Fejlfinding

If you encounter issues with your IOGEAR GHPU01 USB to Serial Adapter, please refer to the following common solutions:

7.1 Enhed ikke genkendt

• Tjek USB-forbindelse: Ensure the adapter is firmly plugged into a working USB port on your computer. Try a different USB port.
• Check Serial Connection: Verify that your serial device is securely connected to the adapter's DB-9 port.
• Genstart computeren: Nogle gange kan en simpel genstart løse genkendelsesproblemer.
• Enhedshåndtering: Open your computer's Device Manager (Windows) and check under "Ports (COM & LPT)" or "Universal Serial Bus controllers" for any unrecognized devices or devices with error symbols.

7.2 Kommunikationsfejl

• COM Port Selection: Confirm that your application is configured to use the correct COM port assigned to the adapter.
• Serielle indstillinger: Double-check that the baud rate, data bits, parity, stop bits, and flow control settings in your application match those of your serial device.
• Enhedskompatibilitet: Ensure your serial device is compatible with RS-232 standards.

7.3 Langsom dataoverførsel

• USB-port: While the adapter is USB 1.1 compliant, using it with a USB 2.0 or 3.0 port will not improve its maximum data transfer rate beyond 230 Kbps. Ensure your computer's USB port is functioning correctly.
• Kabelkvalitet: Use high-quality USB and serial cables.

If problems persist, contact IOGEAR technical support for further assistance.

8. Specifikationer

Note: Product dimensions and item weight listed may refer to packaging or shipping weight.

9. Garanti og support

IOGEAR products are designed for reliability and performance. For warranty information and technical support, please refer to the official IOGEAR webwebstedet eller kontakt deres kundeserviceafdeling. Gem din købskvittering til garantikrav.

For the latest drivers, FAQs, and support resources, visit: www.iogear.com