Fellowes 91712

Fellowes Standard Monitor Riser 91712 Instruction Manual

Model: 91712

Indledning

This manual provides instructions for the proper setup, operation, and maintenance of your Fellowes Standard Monitor Riser, Model 91712. Designed to elevate your monitor to an ergonomic viewing height, this riser helps reduce neck and eye strain, promoting a more comfortable workspace. Please read these instructions carefully before use.

Fellowes Standard Monitor Riser, Platinum/Graphite

Image: The Fellowes Standard Monitor Riser, a sturdy platform with adjustable legs, in platinum and graphite colors.

Opsætningsinstruktioner

Follow these steps to assemble and set up your monitor riser:

  1. Udpak komponenter: Carefully remove all components from the packaging. You should have one platform and four adjustable leg sections.
  2. Fastgør ben: Insert each leg section firmly into the designated holes on the underside of the platform. Ensure they are securely seated.
  3. Juster højden: The riser offers three height adjustments: 2 inches, 2.75 inches, and 4 inches. To adjust, pull the leg sections apart or push them together until the desired height is achieved. Ensure all four legs are set to the same height for stability.
  4. Three height adjustment options for the monitor riser

    Image: Visual representation of the three height settings (2", 2.75", 4") for the monitor riser.

  5. Apply Non-Skid Feet: Ensure the non-skid rubber feet are securely attached to the bottom of each leg. These provide stability and prevent sliding on your desk surface.
  6. Close-up of monitor riser leg with non-slip foot

    Billede: Et nærbillede view of an adjustable leg and its non-slip rubber foot, highlighting the simple height adjustment mechanism.

  7. Positionsmonitor: Place your monitor centrally on the riser platform. Ensure the monitor's base fits within the platform's dimensions.
  8. Kabelstyring: Utilize the integrated cable and power-cord guides on the riser to route your monitor's cables neatly, reducing clutter.
  9. Monitor riser with cables routed through integrated management system

    Image: A close-up showing cables being routed through the built-in cable management slots on the monitor riser.

Betjeningsvejledning

The Fellowes Standard Monitor Riser is designed for straightforward use:

  • Ergonomisk placering: Position your monitor so the top of the screen is at or slightly below eye level. This helps maintain a neutral neck posture.
  • Person working at a desk with a monitor elevated by the riser

    Image: A person seated at a desk, demonstrating the ergonomic benefit of an elevated monitor using the Fellowes riser.

  • Vægt kapacitet: The riser is designed to support monitors weighing up to 60 lbs (27.2 kg). Do not exceed this weight limit to ensure stability and prevent damage.
  • Monitor riser with an icon indicating a 60 lbs weight capacity

    Image: The monitor riser with a graphic indicating its maximum weight capacity of 60 lbs.

  • Space Utilization: The space beneath the riser can be used for storing keyboards, mice, or other small office supplies, helping to keep your desk organized.

Opretholdelse

To ensure the longevity and proper function of your monitor riser:

  • Rensning: Tør overfladen af ​​med en blød, damp cloth. Avoid abrasive cleaners or solvents that may damage the plastic.
  • Inspektion: Periodically check the leg connections and non-skid feet to ensure they are secure and intact.

Fejlfinding

If you encounter any issues with your monitor riser, consider the following:

  • Ustabilitet: Ensure all four legs are fully inserted into the platform and set to the same height. Verify that the non-skid feet are properly attached and making full contact with the desk surface.
  • Sagging Platform: Check that the weight of your monitor does not exceed the 60 lbs (27.2 kg) capacity. Distribute the weight evenly on the platform.

Specifikationer

FeatureDetalje
Modelnummer91712
MaterialeHigh-impact Plastic
FarvePlatinum/Graphite
Produktmål (L x B x H)13.63 x 13.75 x 2.75 inches (at lowest height)
Justerbare højder2 tommer, 2.75 tommer, 4 tommer
Vægt kapacitetOp til 60 lbs (27.2 kg)
Varens vægt1.28 pund (0.58 kg)

Garantioplysninger

The Fellowes Standard Monitor Riser (Model 91712) is backed by a 5 års begrænset garanti. For detailed information regarding warranty coverage, terms, and conditions, please refer to the official Fellowes webwebstedet eller kontakt deres kundesupport direkte. Gem din købsbevis til garantikrav.

Støtte

For further assistance, product inquiries, or to report any issues, please visit the official Fellowes webwebstedet eller kontakt deres kundeserviceafdeling. Kontaktoplysninger kan typisk findes på producentens webwebstedet under afsnittene 'Support' eller 'Kontakt os'.

Fellowes Official Webwebsted: www.fellowes.com

© 2023 Fellowes. Alle rettigheder forbeholdes.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.