Indledning
The Infinity Basslink is a self-contained, high-performance powered subwoofer system designed to enhance the bass response in your vehicle's audio system. It features a 200-watt Class D amplifier, a 10-inch subwoofer, and a 10-inch passive radiator, all integrated into a compact enclosure. This manual provides essential information for the proper installation, operation, and maintenance of your Basslink system.
Image: The Infinity Basslink powered subwoofer system, showing the main unit, a separate mounting bracket, and a wiring harness.
Hvad er der i æsken
Pak forsigtigt indholdet ud, og sørg for, at alle genstande er til stede:
- Infinity Basslink Powered Subwoofer Unit
- Remote Bass-Level Control with connecting wire
- Wiring Harness (for signal input)
- Mounting Hardware (if applicable, for securing the unit)
- Brugermanual (dette dokument)
Note: Additional wiring for power and ground connections (e.g., 12V battery cable, ground cable) is typically not included and must be purchased separately.
Opsætning
Montering
The Basslink can be mounted in various locations within your vehicle, such as the trunk or under a seat, provided there is adequate space and ventilation. Ensure the mounting surface is secure and can support the weight of the unit. Use the provided mounting hardware to firmly attach the Basslink to prevent movement during vehicle operation. Avoid mounting in areas exposed to direct sunlight, excessive heat, or moisture.
Image: The Basslink unit shown alongside its mounting base and the included wiring harness, illustrating the components for installation.
Ledningsforbindelser
Proper wiring is crucial for optimal performance and safety. Consult a professional installer if you are unsure about any steps. Ensure the vehicle's battery is disconnected before making any electrical connections.
- Strøm (BATTERI +12V): Connect a suitable gauge power wire (e.g., 8-gauge) directly from the vehicle's positive battery terminal to the Basslink's +12V input. Install an appropriate fuse (e.g., 20A) within 18 inches of the battery.
- Jord (GND): Connect a short, heavy-gauge ground wire from the Basslink's GND terminal to a clean, unpainted metal surface on the vehicle's chassis. Ensure a good electrical connection.
- Fjerntænding (REM): Connect a wire from your head unit's remote turn-on output (usually blue or blue/white) to the Basslink's REM input. This will turn the Basslink on and off with your head unit.
- Signalindgang: The Basslink supports both low-level (RCA) and high-level (speaker wire) inputs.
- Lavniveauindgang (RCA): If your head unit has RCA pre-outs, connect them to the Basslink's RCA inputs.
- Højniveauindgang (højttalerledning): If your head unit does not have RCA pre-outs, use the provided wiring harness to connect to your vehicle's rear speaker wires. Connect the corresponding positive and negative speaker wires to the harness.
- Remote Bass-Level Control: Connect the remote control unit to the designated port on the Basslink. Route the cable to a convenient location near the driver's seat for easy access.
Billede: Et nærbillede view of the Basslink's rear panel, highlighting the various connection terminals including power, high-level inputs, low-level RCA inputs, and the fuse holder.
Drift
Control Panel Adjustments
The Basslink features several controls on its panel to fine-tune the audio output to your preference and match your vehicle's acoustics. Adjust these controls carefully while listening to music to achieve the desired bass response.
Billede: En detaljeret view of the Basslink's control panel, showing the rotary knobs for Gain, Bass EQ, and Crossover, along with the Phase switch.
- Gevinst: This control matches the input sensitivity of the Basslink to the output of your head unit. Start with the gain at minimum and slowly increase it until the bass sounds balanced with the rest of your system without distortion.
- Bas EQ: This variable bass equalizer allows you to boost or cut bass output at 45Hz, ranging from +3dB to -6dB. Use this to fine-tune the impact of the bass.
- Crossover (Low-Pass Filter): This control sets the upper frequency limit for the Basslink, adjustable from 50Hz to 120Hz. Frequencies above this setting will not be reproduced by the subwoofer. Adjust it to blend smoothly with your main speakers.
- Faseomskifter: This switch (0° or 180°) helps to ensure that the Basslink's output is in phase with your main speakers. Listen to music and switch between 0° and 180° to determine which setting provides the most impactful and coherent bass.
Remote Bass-Level Control
The included remote bass-level control allows you to conveniently adjust the subwoofer's output level from the driver's seat. This is useful for making on-the-fly adjustments based on different music genres or personal preferences without needing to access the Basslink unit directly.
Opretholdelse
The Infinity Basslink is designed for reliable operation with minimal maintenance. Follow these guidelines to ensure its longevity:
- Rensning: Use a soft, dry cloth to clean the exterior of the unit. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or internal components.
- Ventilation: Ensure that the Basslink's ventilation grilles are not obstructed. Proper airflow is essential to prevent overheating.
- Miljøforhold: Undgå at udsætte enheden for ekstreme temperaturer, direkte sollys i længere perioder eller for høj fugtighed.
- Forbindelser: Kontrollér regelmæssigt alle ledningsforbindelser for at sikre, at de er fastgjorte og fri for korrosion.
Fejlfinding
If you experience issues with your Basslink, refer to the following table for common problems and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen strøm / Enheden tænder ikke | Blown fuse; Loose power/ground/remote wire; No remote turn-on signal. | Check and replace fuse; Verify all power, ground, and remote connections are secure; Ensure head unit is providing a remote turn-on signal. |
| Ingen lyd fra subwooferen | Input signal issue; Gain set too low; Crossover set too high/low; Phase incorrect. | Check RCA/speaker wire connections; Increase gain; Adjust crossover frequency; Toggle phase switch. |
| Forvrænget lyd | Forstærkningen er indstillet for højt; Indgangssignalet er for stærkt; Højttaleren er beskadiget. | Reduce gain setting; Check head unit output level; If distortion persists, contact support. |
| Svag basgengivelse | Gain set too low; Bass EQ set too low; Phase incorrect; Subwoofer placement. | Increase gain; Adjust Bass EQ; Toggle phase switch; Experiment with subwoofer placement. |
Specifikationer
Technical specifications for the Infinity Basslink BASSLINK Powered Subwoofer System:
| Mærke | Uendelighed |
| Modelnummer | BASSLINK |
| Højttaler type | Subwoofer |
| Subwoofer diameter | 10 tommer |
| Bashøjttaler diameter | 10 tommer |
| Højttaler Maksimal udgangseffekt | 200 watt |
| Frekvensrespons | 45 Hz |
| Forbindelsesteknologi | Hjælpeenhed, kablet |
| Lydudgangstilstand | Stereoanlæg |
| Monteringstype | Floor Standing |
| Controller type | Fjernbetjening |
| Kontrolmetode | Fjern |
| Varens vægt | 19.8 pund |
| Strømkilde | Corded Electric (12V battery required) |
Garanti
The Infinity Basslink BASSLINK Powered Subwoofer System is covered by a Limited Warranty. Please refer to the warranty card included with your product or visit the official Infinity webwebstedet for detaljerede vilkår og betingelser vedrørende dækning, varighed og procedurer for reklamation. Gem dit købsbevis i forbindelse med garantiservice.
Støtte
For technical assistance, troubleshooting beyond this manual, or service inquiries, please contact Infinity customer support. You can typically find contact information on the official Infinity website or through the retailer where you purchased the product. Have your product model number (BASSLINK) and serial number ready when contacting support.